flexfax: Problems sending PDF from Windows clients

[Andreas Hoedle <hoedle@kwsoft.de>]

Hello

i have problems sending (printing) PDF-files as FAX from Windows clients
with WHFC (printer driver Apple Laserwriter). The converting to tiff
from the delieverd ps-file failed (HylaFAX 4.1beta2 at SuSE Linux 6.2).
For this reason i tried a Lexmark printer driver on the Windows client
which had a option to "disable postscript Passthrough" which helps for
trouble printing PDF-files. With this driver there is no error messages
(as long as i can see) anymore but the transmission (from every
Dokument) fails with an timeout (see below). Then i get a mail
notification which claims succes sending 0 pages with 2-D MMR encoding?? 
Can anyone give me a hint how to track down this converting problems??
How can i manually test the whole converting process?

> May 10 12:13:05.22: [14721]: DIAL 807234
> May 10 12:13:05.22: [14721]: <-- [14:ATDT0W807234@\r]
> May 10 12:13:29.61: [14721]: --> [4:+FCO]
> May 10 12:13:31.17: [14721]: --> [27:+FCI:"      +49 761 807234"]
> May 10 12:13:31.17: [14721]: REMOTE CSI "+49 761 807234"
> May 10 12:13:31.17: [14721]: --> [20:+FIS:1,3,0,2,0,0,0,4]
> May 10 12:13:31.18: [14721]: --> [2:OK]
> May 10 12:13:31.18: [14721]: REMOTE best rate 9600 bit/s
> May 10 12:13:31.18: [14721]: REMOTE max page width 1728 pixels in 215 mm
> May 10 12:13:31.18: [14721]: REMOTE max unlimited page length
> May 10 12:13:31.18: [14721]: REMOTE best vres 7.7 line/mm
> May 10 12:13:31.18: [14721]: REMOTE best format 1-D MR
> May 10 12:13:31.18: [14721]: REMOTE best 20 ms, 10 ms/scanline
> May 10 12:13:31.18: [14721]: USE 9600 bit/s
> May 10 12:13:31.18: [14721]: USE 20 ms, 10 ms/scanline
> May 10 12:13:31.18: [14721]: <-- [4:ATH\r]
> May 10 12:13:32.74: [14721]: --> [7:+FHS:11]
> May 10 12:13:32.74: [14721]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
> May 10 12:13:32.75: [14721]: --> [2:OK]
> May 10 12:13:32.75: [14721]: SESSION END

Thanxs for any help

Andreas