Re: flexfax: install

[George Zeigler <genz1968@mtu-net.ru>]

Hello,
	check out Q115 on the FAQ for SuSE people.  It is very detailed for
helping SuSE people properly set up HylaFax.

George

Thu, 11 May 2000, χΩ ΞΑΠΙΣΑΜΙ:
> Hi Folks,
> i got SuseLinux6.3
> faxstat -s is ok
> but it wont send
> i use whfc
> ideas ???
> 
> 
> May 10 15:20:00 cs sshd[223]: log: RSA key generation complete.
> May 10 15:20:00 cs /usr/sbin/cron[229]: (CRON) STARTUP (fork ok) 
> May 10 15:20:00 cs in.identd[233]: started
> May 10 15:20:01 cs FaxQueuer[274]: Missing ':' separator in modem group
> specification  
> May 10 15:20:01 cs FaxQueuer[274]: HylaFAX (tm) Version 4.1beta2
> May 10 15:20:01 cs FaxQueuer[274]: Copyright (c) 1990-1996 Sam Leffler
> May 10 15:20:01 cs FaxQueuer[274]: Copyright (c) 1991-1996 Silicon
> Graphics, Inc.
> May 10 15:20:02 cs HylaFAX[277]: HylaFAX INET Protocol Server: restarted.
> May 10 15:20:02 cs HylaFAX[277]: HylaFAX Old Protocol Server: restarted.
> May 10 15:20:02 cs HylaFAX[277]: HylaFAX SNPP Protocol Server: restarted.
> May 10 15:20:02 cs FaxGetty[287]: OPEN /dev/modem
> May 10 15:20:02 cs FaxGetty[287]: MODEM set DTR OFF
> May 10 15:20:02 cs FaxGetty[287]: DELAY 2600 ms
> May 10 15:20:05 cs FaxGetty[287]: MODEM set DTR ON
> May 10 15:20:05 cs FaxGetty[287]: MODEM set baud rate: 38400 baud, input
> flow RTS/CTS, output flow RTS/CTS
> May 10 15:20:05 cs FaxGetty[287]: MODEM flush i/o
> May 10 15:20:05 cs FaxGetty[287]: <-- [15:ATE0V1Q0S0=0H0\r]
> May 10 15:20:05 cs FaxGetty[287]: --> [14:ATE0V1Q0S0=0H0]
> May 10 15:20:05 cs FaxGetty[287]: --> [2:OK]
> May 10 15:20:05 cs FaxGetty[287]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> .
> ..
> ..
> MMay 10 15:20:07 cs FaxGetty[287]: --> [2:OK]
> May 10 15:20:07 cs FaxGetty[287]: <-- [18:AT+FAA=1+FCLASS=0\r]
> May 10 15:20:07 cs FaxGetty[287]: --> [2:OK]
> May 10 15:20:07 cs FaxGetty[287]: MODEM input buffering disabled
> May 10 15:20:07 cs FaxQueuer[274]: JOB 10 (active dest +494918002140 pri
> 126 tts 0:00 killtime 2:56:06): CMD START /usr/lib/fax/faxsend -m modem
> sendq/q10 (PID 288)
> May 10 15:20:07 cs FaxSend[288]: MODEM set DTR OFF
> May 10 15:20:07 cs FaxSend[288]: DELAY 2600 ms
> May 10 15:20:08 cs FaxGetty[287]: ANSWER: Can not lock modem device
> May 10 15:20:10 cs FaxSend[288]: MODEM set DTR ON
> May 10 15:20:10 cs FaxSend[288]: MODEM set baud rate: 38400 baud, input
> flow RTS/CTS, output flow RTS/CTS
> May 10 15:20:10 cs FaxSend[288]: MODEM flush i/o
> May 10 15:20:10 cs FaxSend[288]: <-- [15:ATE0V1Q0S0=0H0\r]
> May 10 15:20:10 cs FaxSend[288]: --> [14:ATE0V1Q0S0=0H0]
> May 10 15:20:10 cs FaxSend[288]: --> [2:OK]
> .
> ..
> ..
> MMay 10 15:20:12 cs FaxSend[288]: --> [2:OK]
> May 10 15:20:12 cs FaxSend[288]: MODEM ROCKWELL AC/K56/F/W
> NO:8603-V90_2M_DLS
> May 10 15:20:12 cs FaxSend[288]: <-- [5:ATM0\r]
> May 10 15:20:12 cs FaxSend[288]: --> [2:OK]
> May 10 15:20:12 cs FaxSend[288]: MODEM input buffering disabled
> May 10 15:20:12 cs FaxSend[288]: SEND FAX: JOB 10 DEST 04918002140 COMMID
> 00000061
> May 10 15:20:53 cs FaxSend[288]: SEND FAILED: Busy signal detected
> May 10 15:20:53 cs FaxQueuer[274]: JOB 10 (active dest +494918002140 pri
> 126 tts 0:00 killtime 2:55:20): CMD DONE: exit status 0
> May 10 15:20:53 cs FaxQueuer[274]: JOB 10 (sleeping dest +494918002140 pri
> 125 tts 0:00 killtime 2:55:20): SEND INCOMPLETE: requeue for 3:00; Busy
> signal detected
> May 10 15:20:53 cs FaxQueuer[274]: NOTIFY: bin/notify "sendq/q10"
> "requeued" "" "15:23"
> May 10 15:21:02 cs login: cannot open login definitions /etc/login.defs
> [No such file or directory]
> May 10 15:21:02 cs login: cannot open login definitions /etc/login.defs
> [No such file or directory]
> May 10 15:21:07 cs login[281]: cannot open login definitions
> /etc/login.defs [No such file or directory]
> May 10 15:21:07 cs last message repeated 5 times
> May 10 15:21:08 cs FaxGetty[287]: MODEM set DTR OFF
> May 10 15:21:08 cs FaxGetty[287]: DELAY 2600 ms
> May 10 15:21:10 cs FaxGetty[287]: MODEM set DTR ON
> May 10 15:21:10 cs FaxGetty[287]: MODEM set baud rate: 38400 baud, input
> flow RTS/CTS, output flow RTS/CTS
> May 10 15:21:10 cs FaxGetty[287]: MODEM flush i/o
> May 10 15:21:10 cs FaxGetty[287]: <-- [15:ATE0V1Q0S0=0H0\r]
> May 10 15:21:10 cs FaxGetty[287]: --> [2:OK]
> May 10 15:21:10 cs FaxGetty[287]: <-- [21:ATS8=2S7=60&K3&D3&C1\r]
> May 10 15:21:10 cs FaxGetty[287]: --> [2:OK]
> .
> ..
> ..
> ..
> 
> 
> 
> -- 
> Sent through GMX FreeMail - http://www.gmx.net
--
My personal website
http://www.firstnethou.com/gz/welcome.htm