|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
AW: HylaFax and Elsa modems: solved!
I also have trouble with an Elsa Microlink Basic, SuSE 6.4 and hylafax
4.1pl2. I use the script from the Elsa-Server, but I've got problems to
receive a fax.
The protocol say:
Apr 26 20:33:14.59: [ 6866]: SESSION BEGIN 00000012 493047611855
Apr 26 20:33:14.59: [ 6866]: <-- [4:ATA\r]
Apr 26 20:33:23.85: [ 6866]: --> [4:+FCO]
Apr 26 20:33:23.85: [ 6866]: ANSWER: FAX CONNECTION
Apr 26 20:33:23.86: [ 6866]: MODEM input buffering enabled
Apr 26 20:33:23.86: [ 6866]: RECV FAX: begin
Apr 26 20:33:29.12: [ 6866]: --> [27:+FTI:" D2-Info-Fax"]
Apr 26 20:33:29.12: [ 6866]: REMOTE TSI "D2-Info-Fax"
Apr 26 20:33:29.12: [ 6866]: --> [20:+FCS:1,3,0,2,0,0,0,5]
Apr 26 20:33:29.13: [ 6866]: REMOTE wants 9600 bit/s
Apr 26 20:33:29.13: [ 6866]: REMOTE wants page width 1728 pixels in 215 mm
Apr 26 20:33:29.13: [ 6866]: REMOTE wants unlimited page length
Apr 26 20:33:29.13: [ 6866]: REMOTE wants 7.7 line/mm
Apr 26 20:33:29.13: [ 6866]: REMOTE wants 1-D MR
Apr 26 20:33:29.13: [ 6866]: --> [2:OK]
Apr 26 20:33:29.13: [ 6866]: <-- [7:AT+FDR\r]
Apr 26 20:33:31.47: [ 6866]: --> [7:CONNECT]
Apr 26 20:33:31.47: [ 6866]: RECV: begin page
Apr 26 20:33:31.48: [ 6866]: RECV: send trigger 022
Apr 26 20:33:31.48: [ 6866]: <-- data [1]
After this: Nothing happends. After 2 hours I kill the faxgetty and faxq!
Any hints?
Michael Moll
