Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: I cannot autoprint! please help me!



Just a thought.....
Don't know if this is your problem but most / all hylafax scripts change
many environment variables before doing anything significant. Look at any of
the major scripts for the setup cache script call to see what gets changed
for your system.
ken
======
-----Original Message-----
From: mkaminer@yahoo.com at Internet_TCO 
Sent: Thursday, April 20, 2000 4:01 AM
To: "K.S.Wat SSA\(D\)12" <d1swdev@asiaonline.net> at Internet_TCO
Cc: flexfax@sgi.com at Internet_TCO
Subject: RE: flexfax: I cannot autoprint! please help me!


Yes!
I tried it!  It will print (just like the command '$FAX2PS $1 | lp' at the
end
of the file.)

However, the same thing happens.  It only prints when I run faxrcvd from the
prompt (see format below).  This is so bizarre.

I think Im gonna scream!
AAAAHHHHHRRRRRGGGGG

The question is:  why would it print when I manualy execute the faxrcvd
script,
but when hylafax executes it, it will not print.  But yet e-mail will go
out.
 





--- "K.S.Wat SSA(D)12" <d1swdev@asiaonline.net> wrote:
> Dear Matt,
> 
> You should add the line '$FAX2PS $FILE |lp' after the line
> 'if [ -f $FILE ];then'
> Did you try that ????
> 
> At 05:51 AM 2000/4/19 -0700, matt kaminer wrote:
> >Followup on my autoprint saga:
> >
> >I did some more investigating..
> >
> >When I manually execute faxrcvd like this:
> >"bin/faxrcvd recvq/fax00098.tif ttyS0 "" ""
> >the fax prints!
> >
> >Go figure.
> >
> >Now why would the fax print when I manually execute the script, but when
> >hylafax executes it it does not print?  This is really baffling me.  My
next
> >move is to create a second script that faxrcvd calls with a single line
in
> it
> >(the print line) to see if that works.
> >
> >Everybody comments have been helpful.. Thanks.
> >
> >--- matt kaminer <mkaminer@yahoo.com> wrote:
> > > Running Hylafax 4.1 beta on Linux Mandrake no problems.
> > >
> > > To print I issue the command: fax2ps tif0001.tif | lp
> > >
> > > The fax prints great.
> > >
> > > Now, I add the line: fax2ps $FILE | lp
> > > to the faxrcvd program, and it will not print.  I have tried adding
the 
> > line
> > > in
> > > the beginnging, the end and even the middle for the scirpt.  I have
also
> > > tried
> > > commands like fax2ps $1 | lp and it still doesnt work.  I have also
> > > /usr/bin/fax2ps $FILE | lp and that didnt work either.
> > >
> > > This should work right?
> > > How can I check what faxrcvd is doing?
> > > any suggestions?
> > > This is baffling me!
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > Send online invitations with Yahoo! Invites.
> > > http://invites.yahoo.com
> > >
> >
> >__________________________________________________
> >Do You Yahoo!?
> >Send online invitations with Yahoo! Invites.
> >http://invites.yahoo.com
> 
> 
> Yours,
> K.S.Wat SSA(D)12
> Computer Division
> Hong Kong Observatory
> 
> 

__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services