Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Newbie: Some faxes are partial, please help



Try sticking

Class2RecvDataTrigger:  "\022"

in the config.tty* file.
I was having the same problems on my RH6.0, hylafax-4.0pl2-3rh server, class
2 internal modem server until I made the above change.

Don't forget to kill/restart your faxgetty after you've made the change!! 

Regards
M McCowan
Sys Admin
Motherwell Information Systems - Aust.

-----Original Message-----
From: Johann Sijpkes [mailto:jsijpkes@abl.nl]
Sent: Wednesday, 1 March 2000 18:26
To: flexfax@sgi.com
Subject: flexfax: Newbie: Some faxes are partial, please help


Hello everybody,
 
This question was already in the archive, however i did not find an 
answer. Some of my faxes are received partially: Only the top most 
8 cm appear in the TIF/F. I've monitored the faxing: From a 
standalone faxmachine to the faxserver. Transmission goes without 
a problem: After the first 8 cm, the faxing continues without errors 
on both sides, still only the first 8 cm is in the TIF/F. This does not 
occur when faxing from another fax-modem.
I'm running Hylafax 4 on SuSE Linux 6.3 and a Tornado/Alliance 
Rockwell chipped external modem Class 2 fax.
I have a gut-feeling that it has to do with the connection baudrate: 
the 8 cm chops were connected on 9600 bps, the fax-modem 
transmitted on 14400.

Thanks in advance!
 
Johann Sijpkes
With kind regards,
 
Johann Sijpkes,
Manager IT

ABL BV
Analytisch Biochemisch Laboratorium
W.A. Scholtenstraat 7
Postbus 232 
9400 AE ASSEN
The Netherlands
Tel:0031 592344211 
Fax:0031 592344425



**********************************************************************
This email and any files transmitted with it from Motherwell 
Information Systems may contain information which is 
privileged, confidential and protected from disclosure.
If it is not addressed to you, please immediately contact 
postmaster@motherwell.co.nz and do not use, disclose, 
copy, distribute or retain any of it without our authority.

This footnote also confirms that this email message has 
been swept by MIMEsweeper for the presence of 
computer viruses.

**********************************************************************



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services