Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Newbie: Some faxes are partial, please help



Hello everybody,
 
This question was already in the archive, however i did not find an 
answer. Some of my faxes are received partially: Only the top most 
8 cm appear in the TIF/F. I've monitored the faxing: From a 
standalone faxmachine to the faxserver. Transmission goes without 
a problem: After the first 8 cm, the faxing continues without errors 
on both sides, still only the first 8 cm is in the TIF/F. This does not 
occur when faxing from another fax-modem.
I'm running Hylafax 4 on SuSE Linux 6.3 and a Tornado/Alliance 
Rockwell chipped external modem Class 2 fax.
I have a gut-feeling that it has to do with the connection baudrate: 
the 8 cm chops were connected on 9600 bps, the fax-modem 
transmitted on 14400.

Thanks in advance!
 
Johann Sijpkes
With kind regards,
 
Johann Sijpkes,
Manager IT

ABL BV
Analytisch Biochemisch Laboratorium
W.A. Scholtenstraat 7
Postbus 232 
9400 AE ASSEN
The Netherlands
Tel:0031 592344211 
Fax:0031 592344425




Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services