Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Help! HylaFax won't handshake



Hello,
	I was beginning to wonder how much whining I was going to have to do before
someone looked at this.

>Steve wrote:
> The main log file stops at exactly that point on purpose.
> You then have to look in /var/spool/fax/log for the log of the
> comminications for the specific session.

	I did not know about this log file.  Here is the
/var/spool/fax/log/c0000143 file for Job 105 , whose results in
/var/log/messages I posted.  What's the difference?  I
would love to increase my trace(logging), but don't know how to further increase
it.  I've set all the tracing parameters that I could find.

Jan 10 10:33:24.76: [  230]: SESSION BEGIN 00000143 70959569878
Jan 10 10:33:24.76: [  230]: SEND FAX: JOB 105 DEST 956-9878 COMMID 00000143
Jan 10 10:33:24.76: [  230]: MODEM set DTR OFF
Jan 10 10:33:24.76: [  230]: DELAY 2600 ms
Jan 10 10:33:27.36: [  230]: MODEM set DTR ON
Jan 10 10:33:27.36: [  230]: MODEM set baud rate: 19200 baud, input flow NONE, output flow NONE
Jan 10 10:33:27.36: [  230]: MODEM flush i/o
Jan 10 10:33:27.36: [  230]: <-- [15:ATE0V1Q0S0=0H0\r]
Jan 10 10:33:27.40: [  230]: --> [2:OK]
Jan 10 10:33:27.40: [  230]: <-- [12:ATS8=2S7=60\r]
Jan 10 10:33:27.41: [  230]: --> [2:OK]
Jan 10 10:33:27.41: [  230]: <-- [12:AT+FCLASS=1\r]
Jan 10 10:33:27.42: [  230]: --> [2:OK]
Jan 10 10:33:27.42: [  230]: <-- [5:ATM0\r]
Jan 10 10:33:27.43: [  230]: --> [2:OK]
Jan 10 10:33:27.43: [  230]: MODEM input buffering enabled
Jan 10 10:33:27.43: [  230]: <-- [12:AT+FCLASS=1\r]
Jan 10 10:33:27.54: [  230]: --> [2:OK]
Jan 10 10:33:27.64: [  230]: DIAL 9569878
Jan 10 10:33:27.64: [  230]: <-- [13:ATDP9569878@\r]
Jan 10 10:33:49.07: [  230]: --> [9:NO ANSWER]
Jan 10 10:33:49.07: [  230]: SEND FAILED: No answer from remote
Jan 10 10:33:49.07: [  230]: <-- [5:ATH0\r]
Jan 10 10:33:49.20: [  230]: --> [2:OK]
Jan 10 10:33:49.20: [  230]: MODEM set DTR OFF
Jan 10 10:33:49.20: [  230]: SESSION END

> I'm at home right now, no access to work to be able to give you more
> details, but check out that directory, and you may have to increase your
> logging levels.

Thanks for looking
I've read the FAQ, mans, mailing list, etc.  I think my config.ttyS1 file needs
changing for my PCMCIA modem card.  If that's true, I'm in trouble.

George
--
My personal website
http://www.firstnethou.com/gz/welcome.htm



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services