|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Help! HylaFax won't handshake
Hi,
the problem you have is discribed by the line
> Jan 10 10:33:27.36: [ 230]: MODEM set baud rate: 19200 baud, input flow NONE, output flow NONE
does your config.tty?? containe a line like the following?
ModemFlowControl: rtscts
if yes, verify with your modem manual, that the lines
ModemNoFlowCmd: AT&H0&I0&R1 # disable flow control cmdH0
ModemHardFlowCmd: AT&H1&I0&R2 # hardware flow control cmdH3
ModemSoftFlowCmd: AT&H2&I2&R1 # software flow control cmdH2
contain the correct commands for setting the flowcontrol.
hope that helps
Christoph
>
> Thanks for looking
> I've read the FAQ, mans, mailing list, etc. I think my config.ttyS1 file needs
> changing for my PCMCIA modem card. If that's true, I'm in trouble.
>
> George
> --
> My personal website
> http://www.firstnethou.com/gz/welcome.htm
