Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Zoom modems




My OS is Mandrake 6.0
Hylafax4.0pl2-3rh5
and my config.fax file looks like:

# $Id: rc32acl-1,v 1.18 1996/06/24 02:58:39 sam Rel $
#
# HylaFAX Facsimile Software
#
# Configuration for a Rockwell-based Class 1 modem.
#    SupraFAX v.32bis		firmware V1.200-C or newer
# (and others)
#
# This configuration file sets up the modem to run at 38.4
# and use RTS/CTS flow control by default.
#
#
CountryCode:		351
AreaCode:		21
FAXNumber:		"+351 21 ???????"
LongDistancePrefix:	1
InternationalPrefix:	00
DialStringRules:	etc/dialrules
ServerTracing:		1
SessionTracing:		11
RecvFileMode:		0600
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	5
SpeakerVolume:		low
GettyArgs:		"-h %l %s"
LocalIdentifier:	"NothingSetup"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%p of %%t"
MaxRecvPages:		25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use class 1 interface
ModemRate:		19200
ModemFlowControl:	rtscts		# default
#
ModemNoFlowCmd:		AT&K		# disable flow control cmd
ModemHardFlowCmd:	AT&K3		# hardware flow control cmd
ModemSoftFlowCmd:	AT&K4		# software flow control cmd
ModemSetupDTRCmd:	AT&D3		# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemSetupAACmd:	AT+FAA=0	# in case modem supports Class 2 also
#
ModemMfrQueryCmd:	!Rockwell	# no way to query modem
ModemModelQueryCmd:	!RC32ACL	# not always right
ModemRevQueryCmd:	ATI3


I'd definetly would appreciate some help...
I allways get a problem in the faxaddmodem script 
stty: standard in: unable to perform all request operations
I have the latest sh-utils available!
May you help me out???
Thanx 
JP

On Fri, 7 Jan 2000, Nico Kadel-Garcia wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> 
> On Fri, 7 Jan 2000, Jose Pedro Pereira wrote:
> 
> 
> > I have a 14.4 Ext Zoom modem and I cant get it to work with Hylafax...
> > It dials out correctly, but then it does nothing when the remote
> 
> Zoom = Rockwell chipset. Definitely use the Rockwell configurations.
> 
> > answers... In the logs, there is a message saying Unknown problem,
> > please check modem power... But if it wasnt connected, it wouldnt dial,
> > would it??? May you help me out with this...
> 
> 
> Zoom sucks and has sucked for a long bloody time.
> 
> > I only had problems setting things up in the faxaddmodem script... It
> > says something about stty:standard input: unable to perform all
> > requested operations  a few times, but it detects the modem well...
> > I would appreciate an answer, cause this is killing me...
> > Many thanx in advance
> 
> What version of HylaFAX, what operating system, and what does your
> $SPOOLDIR/etc/config.* file look like?
> 
> 
> 			Nico Kadel-Garcia
> 			Senior Engineer, CIRL 
> 			Mass. Eye and Ear Infirmary
> 			raoul@cirl.meei.harvard.edu
> 
> -----BEGIN PGP SIGNATURE-----
> Version: 2.6.2
> 
> iQCVAwUBOHYi3z/+ItycgIJRAQE+igQAhux66EatWJLm9rwWfPULTNCC9hC6pggA
> 48OTM+XBIkaWrmPXQJHtwXjP0/aRWLDp7caROKqZ3fUBVj9GvmmtxnV9xzQT/IY3
> V2mM4cGPpMJREbDJ3ZojukCs8K4xL+DYkdXIacPz12Rpitj3FYv7fHqYR/lZsn9n
> 0K5nKZUZwrE=
> =KrQ1
> -----END PGP SIGNATURE-----
> 
> 



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services