No response to MPS or EOP

To: flexfax@sgi.com
Subject: flexfax: No response to MPS or EOP
From: Michele Malgeri <Michele.Malgeri@iit.unict.it>
Date: Fri, 29 Oct 1999 10:23:12 +0200

Can't send more than one page to any receiver ...
Error reported about MPS or EOP

Please help me

Modem:
Compaq 56000 (?)
fac class 1

Hylafax Version:
    Trying localhost (127.0.0.1) at port 4559...
    Connected to localhost.
    220 prn server (HylaFAX (tm) Version 4.0pl2) ready.
    -> USER michele
    230 User michele logged in.
    -> PORT 127,0,0,1,4,5
    200 PORT command successful.
    -> LIST status
    150 Opening new data connection for "status".
    HylaFAX scheduler on prn: Running
    Modem modem (+39957382397): Running and idle
    226 Transfer complete.
OS:
Linux RedHat 5.x (Linux version 2.0.36)

Log:
Oct 29 09:06:21.80: [  564]: --> [0:]
Oct 29 09:06:21.80: [  564]: MODEM <Empty line>
Oct 29 09:06:21.80: [  564]: <-- data [1]
Oct 29 09:06:21.86: [  564]: --> [2:OK]
Oct 29 09:06:21.86: [  564]: SEND send MPS (more pages, same document)
Oct 29 09:06:21.86: [  564]: <-- [9:AT+FTH=3\r]
Oct 29 09:06:21.92: [  564]: --> [7:CONNECT]
    data
Oct 29 09:06:23.23: [  564]: --> [2:OK]
Oct 29 09:06:23.23: [  564]: <-- [9:AT+FRH=3\r]
Oct 29 09:06:26.33: [  564]: --> [0:]
Oct 29 09:06:26.33: [  564]: MODEM <Empty line>
Oct 29 09:06:26.33: [  564]: <-- data [1]
Oct 29 09:06:26.39: [  564]: --> [2:OK]
Oct 29 09:06:26.39: [  564]: <-- [9:AT+FTH=3\r]
Oct 29 09:06:26.44: [  564]: --> [7:CONNECT]
    data
Oct 29 09:06:27.76: [  564]: --> [2:OK]
Oct 29 09:06:27.76: [  564]: <-- [5:ATH0\r]
Oct 29 09:06:28.48: [  564]: --> [2:OK]
Oct 29 09:06:28.48: [  564]: SESSION END

Another example of log:
Oct 29 08:56:32.46: [  353]: <-- [12:ATS8=2S7=60\r]
Oct 29 08:56:32.48: [  353]: --> [2:OK]
Oct 29 08:56:32.48: [  353]: <-- [12:AT+FCLASS=1\r]
Oct 29 08:56:32.50: [  353]: --> [2:OK]
Oct 29 08:56:32.50: [  353]: <-- [5:ATM0\r]
Oct 29 08:56:32.51: [  353]: --> [2:OK]
Oct 29 08:56:32.51: [  353]: <-- [12:AT+FCLASS=1\r]
Oct 29 08:56:32.63: [  353]: --> [2:OK]
Oct 29 08:56:32.66: [  353]: DIAL 0,095338280
Oct 29 08:56:32.66: [  353]: <-- [16:ATDT0,095338280\r]
Oct 29 08:56:53.10: [  353]: --> [7:CONNECT]
Oct 29 08:56:54.48: [  353]: --> [2:OK]
Oct 29 08:56:54.48: [  353]: <-- [9:AT+FRH=3\r]
Oct 29 08:56:54.50: [  353]: --> [7:CONNECT]
Oct 29 08:56:55.20: [  353]: --> [2:OK]
Oct 29 08:56:55.20: [  353]: REMOTE CSI "095338280"
Oct 29 08:56:55.20: [  353]: <-- [9:AT+FRH=3\r]
Oct 29 08:56:55.22: [  353]: --> [7:CONNECT]
Oct 29 08:56:55.49: [  353]: --> [2:OK]
Oct 29 08:56:55.49: [  353]: REMOTE best rate 9600 bit/s
Oct 29 08:56:55.49: [  353]: REMOTE max page width 1728 pixels in 215 mm

Oct 29 08:56:55.49: [  353]: REMOTE max unlimited page length
Oct 29 08:56:55.49: [  353]: REMOTE best vres 7.7 line/mm
Oct 29 08:56:55.49: [  353]: REMOTE best format 2-D MMR
Oct 29 08:56:55.49: [  353]: REMOTE supports T.30 Annex A, ECM
Oct 29 08:56:55.49: [  353]: REMOTE best 20 ms/scanline
Oct 29 08:56:55.49: [  353]: USE 9600 bit/s
Oct 29 08:56:55.49: [  353]: USE 20 ms/scanline
Oct 29 08:56:55.49: [  353]: SEND file "docq/doc156.ps;00"
Oct 29 08:56:55.63: [  353]: USE page width 1728 pixels in 215 mm
Oct 29 08:56:55.63: [  353]: USE unlimited page length
Oct 29 08:56:55.63: [  353]: USE 3.85 line/mm
Oct 29 08:56:55.63: [  353]: USE 1-D MR
Oct 29 08:56:55.63: [  353]: SEND training at v.29 9600 bit/s
Oct 29 08:56:55.63: [  353]: <-- [9:AT+FTH=3\r]
Oct 29 08:56:55.68: [  353]: --> [7:CONNECT]
Oct 29 08:56:55.68: [  353]: <-- data [23]
Oct 29 08:56:55.68: [  353]: <-- data [2]
Oct 29 08:56:57.47: [  353]: --> [7:CONNECT]
Oct 29 08:56:57.47: [  353]: <-- data [6]
Oct 29 08:56:57.47: [  353]: <-- data [2]
Oct 29 08:56:57.90: [  353]: --> [2:OK]
Oct 29 08:56:57.90: [  353]: DELAY 75 ms
Oct 29 08:56:57.99: [  353]: <-- [10:AT+FTM=96\r]
Oct 29 08:56:58.05: [  353]: --> [7:CONNECT]
Oct 29 08:56:58.05: [  353]: <-- data [1024]
Oct 29 08:56:58.05: [  353]: <-- data [776]
Oct 29 08:56:58.05: [  353]: <-- data [2]
Oct 29 08:57:00.01: [  353]: --> [2:OK]
Oct 29 08:57:00.01: [  353]: <-- [9:AT+FRH=3\r]
Oct 29 08:57:00.40: [  353]: --> [7:CONNECT]
Oct 29 08:57:01.26: [  353]: --> [2:OK]
Oct 29 08:57:01.26: [  353]: TRAINING succeeded
Oct 29 08:57:01.26: [  353]: <-- [10:AT+FTM=96\r]
Oct 29 08:57:01.32: [  353]: --> [7:CONNECT]
Oct 29 08:57:01.32: [  353]: SEND begin page
    data
Oct 29 08:57:17.37: [  353]: SENT 6171 bytes of data
Oct 29 08:57:17.37: [  353]: SEND 1D RTC
Oct 29 08:57:17.37: [  353]: <-- data [29]
Oct 29 08:57:17.38: [  353]: <-- data [2]
Oct 29 08:57:17.38: [  353]: SEND end page
Oct 29 08:57:29.19: [  353]: --> [2:^S^Q]
Oct 29 08:57:29.19: [  353]: --> [2:OK]
Oct 29 08:57:29.19: [  353]: DELAY 75 ms
Oct 29 08:57:29.28: [  353]: SEND send MPS (more pages, same document)
Oct 29 08:57:29.28: [  353]: <-- [9:AT+FTH=3\r]
Oct 29 08:57:29.33: [  353]: --> [7:CONNECT]
Oct 29 08:57:29.33: [  353]: <-- data [3]
Oct 29 08:57:29.33: [  353]: <-- data [2]
Oct 29 08:57:30.65: [  353]: --> [2:OK]
Oct 29 08:57:30.65: [  353]: <-- [9:AT+FRH=3\r]
Oct 29 08:57:33.75: [  353]: --> [0:]
Oct 29 08:57:33.75: [  353]: MODEM <Empty line>
Oct 29 08:57:33.75: [  353]: <-- data [1]
Oct 29 08:57:33.81: [  353]: --> [2:OK]
Oct 29 08:57:33.81: [  353]: SEND send MPS (more pages, same document)
Oct 29 08:57:33.81: [  353]: <-- [9:AT+FTH=3\r]
Oct 29 08:57:33.86: [  353]: --> [7:CONNECT]
Oct 29 08:57:33.86: [  353]: <-- data [3]
Oct 29 08:57:33.86: [  353]: <-- data [2]
Oct 29 08:57:35.17: [  353]: --> [2:OK]
Oct 29 08:57:35.17: [  353]: <-- [9:AT+FRH=3\r]
Oct 29 08:57:38.27: [  353]: --> [0:]
Oct 29 08:57:38.27: [  353]: MODEM <Empty line>
Oct 29 08:57:38.27: [  353]: <-- data [1]
Oct 29 08:57:38.33: [  353]: --> [2:OK]
Oct 29 08:57:38.33: [  353]: SEND send MPS (more pages, same document)
Oct 29 08:57:38.33: [  353]: <-- [9:AT+FTH=3\r]
Oct 29 08:57:38.39: [  353]: --> [7:CONNECT]
Oct 29 08:57:38.39: [  353]: <-- data [3]
Oct 29 08:57:38.39: [  353]: <-- data [2]
Oct 29 08:57:39.70: [  353]: --> [2:OK]
Oct 29 08:57:39.70: [  353]: <-- [9:AT+FRH=3\r]
Oct 29 08:57:42.80: [  353]: --> [0:]
Oct 29 08:57:42.80: [  353]: MODEM <Empty line>
Oct 29 08:57:42.80: [  353]: <-- data [1]
Oct 29 08:57:42.86: [  353]: --> [2:OK]
Oct 29 08:57:42.86: [  353]: SEND: No response to MPS or EOP repeated 3
tries; Giving up after 3 attempts to send same page "docq/doc156.ps;00",
dirnum 0
Oct 29 08:57:42.86: [  353]: <-- [9:AT+FTH=3\r]
Oct 29 08:57:42.91: [  353]: --> [7:CONNECT]
Oct 29 08:57:42.91: [  353]: <-- data [3]
Oct 29 08:57:42.91: [  353]: <-- data [2]
Oct 29 08:57:44.23: [  353]: --> [2:OK]
Oct 29 08:57:44.23: [  353]: <-- [5:ATH0\r]
Oct 29 08:57:44.95: [  353]: --> [2:OK]
Oct 29 08:57:44.95: [  353]: SESSION END

begin:vcard 
n:Malgeri;Michele
tel;fax:+39 095388280
tel;work:+39 0957382360
x-mozilla-html:TRUE
org:Facolta' di Ingegneria - Universita' di Catania;Istituto di Informatica e Telecomunicazioni
version:2.1
email;internet:Michele.Malgeri@iit.unict.it
title:Researcher
adr;quoted-printable:;;Edificio Polifunzionale=0D=0AViale Andrea Doria, 6;Catania;;I-95125;Italy
x-mozilla-cpt:;-16800
fn:Michele Malgeri
end:vcard

Follow-Ups:
- Re: No response to MPS or EOP
  - From: Giulio Orsero <giulioo@tiscalinet.it>
- Re: No response to MPS or EOP
  - From: David Woolley <david@djwhome.demon.co.uk>

Prev by Date: modem wedget
Next by Date: Re: No response to MPS or EOP
Prev by thread: modem wedget
Next by thread: Re: No response to MPS or EOP
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services