Re: No response to MPS or EOP

To: Michele.Malgeri@iit.unict.it (Michele Malgeri)
Subject: Re: flexfax: No response to MPS or EOP
From: David Woolley <david@djwhome.demon.co.uk>
Cc: flexfax@sgi.com
Reply-To: flexfax@sgi.com
Date: Sat, 30 Oct 1999 11:24:24 +0100 (BST)

> Oct 29 08:57:01.26: [  353]: <-- [10:AT+FTM=96\r]
> Oct 29 08:57:01.32: [  353]: --> [7:CONNECT]
> Oct 29 08:57:01.32: [  353]: SEND begin page
>     data

   This is too long for 6171 bytes at 9600.  Looks like the modem has
   been *under*run for some reaason.  Are you possibly using an *interface*
   speed of 300 bps (should be 19200 or more)?

> Oct 29 08:57:17.37: [  353]: SENT 6171 bytes of data
> Oct 29 08:57:17.37: [  353]: SEND 1D RTC
> Oct 29 08:57:17.37: [  353]: <-- data [29]
> Oct 29 08:57:17.38: [  353]: <-- data [2]
> Oct 29 08:57:17.38: [  353]: SEND end page

References:
- No response to MPS or EOP
  - From: Michele Malgeri <Michele.Malgeri@iit.unict.it>

Prev by Date: Did it really work or was it just faking it ?
Next by Date: Re: FW: Will 4.1b3 or 4.1 solve "no response to MPS"?
Prev by thread: Re: No response to MPS or EOP
Next by thread: Re: No response to MPS or EOP
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services