Re: flexfax: COMREC ERROR

[Joaquín Arza Laurenz <jarza@unav.es>]

Reading the FAQ I found a possible solution; disable the use of 2D-encoded in
the Multitech Modem. First i tried to do it using the parameter "Use2D:  no"
in the config files: "config", "config.ttyS", but only worked for sending
faxes; the modem still received 2D-encode if the remote fax asked for it.
Later i found the FAQ "Q135: Encoding errors in facsimile received with my
Everex 24/96E?", where it was suggested to add the following line to the the
"config.ttyS" to disable the use of 2D-encoded:

        Class2DCCQueryCmd:      "!(0,1),(0-3),(0-4),(0-2),(0),(0),(0),(0-7)"

if you want more information about this values, read the FAQ
"http://www.hylafax.org/HylaFAQ/Q135.html".

After applying this to my config files, i started receiving faxes 1D-encoded,
and no more COMREC errors have appeared. In fact, in one day of work i
received sixty faxes, and only one of them failed, but with other error.
The only disadvantage is that the communication is always at 9600, but for
now, is only a minor problem for me.

I hope it will help someone.
Joaquin Arza.



> Joaquín Arza Laurenz wrote:
> >
> > Hello.
> >
> > This is the second time i send a message about this problem.
> > My system is Hylafax 4.1beta1 on Red Hat 5.2, with two Multitech
> > 2834ZDXI modems.
> > I've installed the version but it hasn't fixed the error.
> > The message i got whe receiving some faxes is:
> >
> > An attempt to receive facsimile on ttyS1 failed because:
> >
> >     COMREC error
> >
> > This doesn't happen everytime with a modem. In fact, i have sent faxes
> > from a test fax, and some of them are reveived without problems and the
> > others generate this error. Simply adding a line to the fax i send, may
> > result in problems for receiving the fax or also that a fax that's
> > having problems is received without problems. Have anyone idea what is
> > happening with my fax server.
> >
> >     ---- Transcript of session follows ----
> >
> > Oct 05 12:09:20.96: [ 5008]: SESSION BEGIN 00000062 34948296500
> > Oct 05 12:09:20.97: [ 5008]: <-- [4:ATA\r]
> > Oct 05 12:09:46.02: [ 5008]: --> [5:+FCON]
> > Oct 05 12:09:46.02: [ 5008]: ANSWER: FAX CONNECTION
> > Oct 05 12:09:46.02: [ 5008]: RECV FAX: begin
> > Oct 05 12:09:51.11: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
> > Oct 05 12:09:51.11: [ 5008]: REMOTE TSI "+Clinica Universitar"
> > Oct 05 12:09:51.11: [ 5008]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
> > Oct 05 12:09:51.11: [ 5008]: REMOTE wants 14400 bit/s
> > Oct 05 12:09:51.11: [ 5008]: REMOTE wants page width 1728 pixels in 215
> > mm
> > Oct 05 12:09:51.11: [ 5008]: REMOTE wants unlimited page length
> > Oct 05 12:09:51.11: [ 5008]: REMOTE wants 7.7 line/mm
> > Oct 05 12:09:51.11: [ 5008]: REMOTE wants 2-D MR
> > Oct 05 12:09:51.11: [ 5008]: --> [2:OK]
> > Oct 05 12:09:51.12: [ 5008]: <-- [7:AT+FDR\r]
> > Oct 05 12:09:52.50: [ 5008]: --> [5:+FCFR]
> > Oct 05 12:09:52.50: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
> > Oct 05 12:09:52.50: [ 5008]: REMOTE TSI "+Clinica Universitar"
> > Oct 05 12:09:52.50: [ 5008]: --> [21:+FDCS:1,5,0,2,1,0,0,0]
> > Oct 05 12:09:52.50: [ 5008]: REMOTE wants 14400 bit/s
> > Oct 05 12:09:52.50: [ 5008]: REMOTE wants page width 1728 pixels in 215
> > mm
> > Oct 05 12:09:52.50: [ 5008]: REMOTE wants unlimited page length
> > Oct 05 12:09:52.50: [ 5008]: REMOTE wants 7.7 line/mm
> > Oct 05 12:09:52.51: [ 5008]: REMOTE wants 2-D MR
> > Oct 05 12:09:53.73: [ 5008]: --> [7:CONNECT]
> > Oct 05 12:09:53.73: [ 5008]: RECV: begin page
> > Oct 05 12:09:53.73: [ 5008]: RECV: send trigger 022
> > Oct 05 12:10:01.76: [ 5008]: RECV: 12703 bytes of data, 908 total lines
> > Oct 05 12:10:01.76: [ 5008]: --> [15:+FPTS:2,0,0,0,0]
> > Oct 05 12:10:03.04: [ 5008]: --> [6:+FET:2]
> > Oct 05 12:10:03.04: [ 5008]: RECV recv EOP (no more pages or documents)
> > Oct 05 12:10:03.04: [ 5008]: --> [2:OK]
> > Oct 05 12:10:03.04: [ 5008]: RECV send RTN (retrain negative)
> > Oct 05 12:10:03.04: [ 5008]: <-- [7:AT+FDR\r]
> > Oct 05 12:10:11.22: [ 5008]: --> [5:+FCFR]
> > Oct 05 12:10:11.22: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
> > Oct 05 12:10:11.22: [ 5008]: REMOTE TSI "+Clinica Universitar"
> > Oct 05 12:10:11.22: [ 5008]: --> [21:+FDCS:1,4,0,2,1,0,0,0]
> > Oct 05 12:10:11.22: [ 5008]: REMOTE wants 12000 bit/s
> > Oct 05 12:10:11.22: [ 5008]: REMOTE wants page width 1728 pixels in 215
> > mm
> > Oct 05 12:10:11.22: [ 5008]: REMOTE wants unlimited page length
> > Oct 05 12:10:11.22: [ 5008]: REMOTE wants 7.7 line/mm
> > Oct 05 12:10:11.23: [ 5008]: REMOTE wants 2-D MR
> > Oct 05 12:10:12.42: [ 5008]: --> [7:CONNECT]
> > Oct 05 12:10:12.42: [ 5008]: RECV: begin page
> > Oct 05 12:10:12.42: [ 5008]: RECV: send trigger 022
> > Oct 05 12:10:21.87: [ 5008]: RECV: 12707 bytes of data, 910 total lines
> > Oct 05 12:10:21.87: [ 5008]: --> [15:+FPTS:2,0,0,0,0]
> > Oct 05 12:10:23.12: [ 5008]: --> [6:+FET:2]
> > Oct 05 12:10:23.12: [ 5008]: RECV recv EOP (no more pages or documents)
> > Oct 05 12:10:23.12: [ 5008]: --> [2:OK]
> > Oct 05 12:10:23.12: [ 5008]: RECV send RTN (retrain negative)
> > Oct 05 12:10:23.12: [ 5008]: <-- [7:AT+FDR\r]
> > Oct 05 12:10:31.33: [ 5008]: --> [5:+FCFR]
> > Oct 05 12:10:31.33: [ 5008]: --> [28:+FTSI:"+Clinica Universitar"]
> > Oct 05 12:10:31.33: [ 5008]: REMOTE TSI "+Clinica Universitar"
> > Oct 05 12:10:31.33: [ 5008]: --> [21:+FDCS:1,3,0,2,1,0,0,0]
> > Oct 05 12:10:31.33: [ 5008]: REMOTE wants 9600 bit/s
> > Oct 05 12:10:31.33: [ 5008]: REMOTE wants page width 1728 pixels in 215
> > mm
> > Oct 05 12:10:31.33: [ 5008]: REMOTE wants unlimited page length
> > Oct 05 12:10:31.33: [ 5008]: REMOTE wants 7.7 line/mm
> > Oct 05 12:10:31.34: [ 5008]: REMOTE wants 2-D MR
> > Oct 05 12:10:32.53: [ 5008]: --> [7:CONNECT]
> > Oct 05 12:10:32.53: [ 5008]: RECV: begin page
> > Oct 05 12:10:32.53: [ 5008]: RECV: send trigger 022
> > Oct 05 12:10:44.09: [ 5008]: RECV: 12710 bytes of data, 912 total lines
> > Oct 05 12:10:44.09: [ 5008]: --> [15:+FPTS:2,0,0,0,0]
> > Oct 05 12:10:45.35: [ 5008]: --> [6:+FET:2]
> > Oct 05 12:10:45.35: [ 5008]: RECV recv EOP (no more pages or documents)
> > Oct 05 12:10:45.35: [ 5008]: --> [2:OK]
> > Oct 05 12:10:45.35: [ 5008]: RECV send RTN (retrain negative)
> > Oct 05 12:10:45.35: [ 5008]: <-- [7:AT+FDR\r]
> > Oct 05 12:10:48.14: [ 5008]: --> [8:+FHNG:72]
> > Oct 05 12:10:48.14: [ 5008]: REMOTE HANGUP: COMREC error (code 72)
> > Oct 05 12:10:48.14: [ 5008]: RECV FAX (00000062): recvq/fax00018.tif
> > from +Clinica Universitar, route to <unspecified>, 0 pages in 1
> > :02
> > Oct 05 12:10:48.15: [ 5008]: RECV FAX: COMREC error
> > Oct 05 12:10:48.15: [ 5008]: RECV FAX (00000062): session with +Clinica
> > Universitar terminated abnormally: COMREC error
> > Oct 05 12:10:48.15: [ 5008]: RECV FAX: bin/faxrcvd "recvq/fax00018.tif"
> > "ttyS1" "00000062" "COMREC error"
> >
> > Thanks for your help.
> > Joaquin Arza.