|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
RE: Phase C errors with USR 33.6
hi,
same phase C error I receive with USR courier V everything. what is
specific, that i receive this error from specific fax machines (that is,
i know few senders, who can not send me fax through modem). when they
send fax to fax machine, it works.
rimantas
> -----Original Message-----
> From: Dave Wreski [SMTP:dave@nic.com]
> Sent: Wednesday, October 06, 1999 7:47 PM
> To: HylaFAX
> Subject: flexfax: Phase C errors with USR 33.6
>
>
> Hi all. I'm using hylafax-4.0pl2 on RH6 with an external USR
> sportster
> 33.6 modem. It seems to be working ok, except for the occasional
> problem:
>
> 1. I receive the following messages occasionally:
>
> Oct 6 13:40:43 fax FaxGetty[5353]: RECV FAX (00000095): session with
> 201
> 555 0160 terminated abnormally: Unspecified Phase C error, including
> too
> much delay between TCF and +FDR command
> Oct 6 13:40:43 fax FaxGetty[5353]: RECV FAX: bin/faxrcvd
> "recvq/fax00063.tif" "ttyS0" "00000095" "Unspecified Phase C error,
> including too much delay between TCF and +FDR command"
>
> It seems to have received part of the fax, but not all of it. What
> could
> be causing this? The remote end, perhaps?
>
> 2. Occasionally faxstat reports "waiting for modem to become ready"
> when
> in fact there is no fax coming in. It seems to occasionally not hang
> up
> after receiving a call. I need to kill faxgetty and getty, at which
> point
> it works again.
>
> Thanks,
> Dave
>
