Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

faxmodem -> faxgetty



Hello, 

I want to migrate from "faxmodem" to "faxgetty" because
I want to receive faxes, too. "faxmodem" works fine.
Instead of starting faxmodem I started faxgetty:

    /usr/lib/fax/faxgetty ttyS0

All seems to work well, but the modem sends the fax
extremly slow, probably with 2400 baud or the transfer
is interrupted by an error I do not understand 
and an error "can not lock modem" : 

extract from /var/log/messages: 
15:22 rex FaxGetty[596]: --> [11:(0-2),(0-2)]
15:22 rex FaxGetty[596]: --> [2:OK]
15:22 rex FaxGetty[596]: <-- [9:AT+FAP=?\r]
15:23 rex FaxGetty[596]: --> [5:ERROR]
15:23 rex FaxGetty[596]: <-- [9:AT+FSP=?\r]
15:23 rex FaxGetty[596]: --> [5:(0,1)]
15:23 rex FaxGetty[596]: --> [2:OK]              

15:28 rex FaxGetty[597]: OPEN /dev/ttyS1
15:28 rex FaxGetty[597]: /dev/ttyS1: Can not lock device.
15:58 rex FaxGetty[597]: Purge stale UUCP lock /var/lock/LCK..ttyS1
15:58 rex FaxGetty[597]: MODEM set DTR OFF
15:58 rex FaxGetty[597]: DELAY 2600 ms
16:01 rex FaxGetty[597]: MODEM set DTR ON
16:01 rex FaxGetty[597]: MODEM set baud rate: 19200 baud, input flow
NONE, output flow NONE   


Can somebody help ?

Ekkard



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services