Re: flexfax: modem not shown in list...

[giulioo@tiscalinet.it (Giulio Orsero)]

On Tue, 29 Jun 1999 19:05:12 +0200 (MET DST), hai scritto:

>Then I run faxmodem ttySx (and no faxgetty since is a sending only
>enviroment)
>I get no answer (is this already wird?)
No, it so by design, it's ok.

>if I run fax stat no good news
>>[root@linux /root]# faxstat =20
>>HylaFAX scheduler on linux.torva.net: Running
>>[root@linux /root]#=20
Check if you have /var/spool/fax/FIFO.ttySX

$ ls -l /var/spool/fax/FIFO.ttyS2
prw-------   1 uucp     wheel           0 Nov  4  1998
/var/spool/fax/FIFO.ttyS2

>carrier detection adding an x3 to the att command somewhere... couldn't
>find where yet (Did not look too hard since since it doesn't even try to

Workaround:
ModemResultCodesCmd:    ATQ0X3          # enable result codes

--=20
Giulio