Re: flexfax: Multiple modems

[Matt Kaminer <matt@kaminer.com>]

thats a problem with the phone line.  you need to have call hunt set up
by your phone company, otherwise it would never ring down to line two!

Mark Hatton wrote:

> Hi
>
> I am using hylafax v4.0p12 on a PC Solaris X86 2.5.1 with latest
>
> recommended patch bundle. I have access to a 16 port digiport II
>
> using its software on the PC to recognise the digi's ports as extra
>
> serial ports.
>
> I have configured hylafax to use two of the digiport ports.
>
> Both ports are seen in faxstat and work independantly ie/ disable
>
> either of them and they work fine, sending faxes. My problem is
>
> when both are running, they do not load share. Port one receives
>
> all the faxes and none go to port two. Even when there is problem
>
> with port one, it will not switch to the other modem on the other
>
> port.
>
> Any reason for this, that you know of ?
>
> Many thanks for you help
>
> Mark
>
> --
>  ___________________________________________________________________
>
> Mark Hatton - Sys Admin
> _____________________________________________________________________