Re: DTMF routing using Hylafax.

To: David Woolley <david@djwhome.demon.co.uk>
Subject: Re: flexfax: DTMF routing using Hylafax.
From: "NetWork 2020" <NetWork2020@HongKong.com>
CC: flexfax@sgi.com
Date: Wed, 12 May 1999 16:03:48 +0800

Thanks, but it is not easy to done.

> > Any one can tell me how to use DTMF routing in Hylafax.
> 
> You will need to change the source code, after finding a modem that
> will answer but not try and negotiate fax mode, but can be then forced
> to negotiate fax mode without dropping the line.  This probably means
> using a voice mode and initially accepting the call in voice mode.
> 
> The only support for automatic routing is based on source information
> transmitted as CLI and/or (can't remember which) calling line ID or
> fax transmitting station ID.

References:
- Re: DTMF routing using Hylafax.
  - From: David Woolley <david@djwhome.demon.co.uk>

Prev by Date: Re: beta version?
Next by Date: Re: getty questions
Prev by thread: Re: DTMF routing using Hylafax.
Next by thread: Re: DTMF routing using Hylafax.
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services