Re: flexfax: Urgent please: fax to a fax-number, another one answers

[giuliox@tin.it (Giulio Orsero)]

On Thu, 6 May 1999 08:17:05 +0100 (BST), hai scritto:

>> May 05 10:26:54.20: [ 6039]: DIAL 0117710190
>
>Modem told to dial number.
>
>> May 05 10:26:54.20: [ 6039]: <-- [16:ATDT0117710190@\r]
>
>Number echoed back from modem.  If it doesn't go to this number it is
>not a Hylafax problem.  You might want to consider using an AT&F based
>initialisation sequence, rather than an ATZ based one.

I thought what the modem echoes back should be prefixed with --> (as for OK's)
, not with <--.

So I see Hfax tells the modem the number, but there's no aknowledgement from
the modem as regards to the fax number.

=====
May 05 10:26:53.87: [ 6039]: <-- [26:AT+FLID="+39 0131 361611"\r]
May 05 10:26:54.19: [ 6039]: --> [2:OK]
May 05 10:26:54.20: [ 6039]: DIAL 0117710190
May 05 10:26:54.20: [ 6039]: <-- [16:ATDT0117710190@\r]
May 05 10:27:12.58: [ 6039]: --> [5:+FCON]
May 05 10:27:15.04: [ 6039]: --> [36:+FNSF:00 00 75 01 02 03 20 40 00 FF ]
May 05 10:27:15.04: [ 6039]: REMOTE NSF "00 00 75 01 02 03 20 40 00 FF"
May 05 10:27:15.04: [ 6039]: --> [28:+FCSI:"         011 6173202"]
=====

Thanks

-- 
Giulio
giuliox@tin.it