Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: 2-D MR data format ...





Martin Renters wrote:

> Add the following line to the end of your config.tty* file:
> 
> Class2DCCQueryCmd:     "!(0,1),(0-5),(0-4),(0-2),(0),(0),(0),(0-7)"
> 
> You may find you have problems receiving faxes from certain Canon fax
> machines.  In this case, modify the line above to:
> 
> Class2DCCQueryCmd:     "!(0,1),(0-3),(0-4),(0-2),(0),(0),(0),(0-7)"
>                                   ^
> 
> This limits the speed of fax transmission to 9600 baud from 14400.
> More information about these parameters can be found at
> http://www.hylafax.org/setup-advanced.html#Class2Liars

Thanks - that did it!

BTW, does anyone know where this is documented?

--
Tim Kelley
tpkelley@winkinc.com
504.243.4682



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services