|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
reception errors
Hello everybody and "privet" (russian-hello) from "cold" St-Petersburg, Russia.
I have applying with this fax reception problem repeatedly.
My machine i486dx2 66mhz is runninig FreeBSD 2.5 Hylafaxa v4.0 pl2
with gnu C compiler v.2.7, USCourier V. Everithing: clock freq. 20.16 mhZ
supervisor date 04/29/96, DSP date 04/11/96, Supervisor rev 6.5.0, DSP rev
1.3.2, DTE-DCE speed 57600 bps, flow control: rtscts.
I know that USR modems are not recomended in usage with HylaFaX but by
the way I have experimented 2.0 functionality.
I am still having problems in fax reception with almoust every remote sending
fax machine when my modem is working as class 2.0 device.
There is only one case when I have managed succsessfully receive fax
from one Rockwell FAX modem (the first trace log) . Any attempt to receive
from ordinary FaX machine are failing (another trace logs). Note that I have
played with DCE-DTE speed during this logs lowing it from 57600 to 19200.
-----------------------------------------------------------------------
Apr 24 18:45:20.52: [ 269]: SESSION BEGIN 00000026 78121832349
Apr 24 18:45:20.52: [ 269]: <-- [4:ATA\r]
Apr 24 18:45:29.38: [ 269]: --> [4:+FCO]
Apr 24 18:45:29.38: [ 269]: ANSWER: FAX CONNECTION
Apr 24 18:45:29.40: [ 269]: RECV FAX: begin
Apr 24 18:45:31.08: [ 269]: --> [27:+FTI:" 7 812 2479988 "]
Apr 24 18:45:31.08: [ 269]: REMOTE TSI "7 812 2479988"
Apr 24 18:45:31.48: [ 269]: --> [20:+FCS:1,3,0,0,0,0,0,0]
Apr 24 18:45:31.76: [ 269]: REMOTE wants 9600 bit/s
Apr 24 18:45:31.77: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
Apr 24 18:45:31.77: [ 269]: REMOTE wants A4 page length (297 mm)
Apr 24 18:45:31.77: [ 269]: REMOTE wants 7.7 line/mm
Apr 24 18:45:31.77: [ 269]: REMOTE wants 1-D MR
Apr 24 18:45:31.77: [ 269]: --> [2:OK]
Apr 24 18:45:31.77: [ 269]: <-- [7:AT+FDR\r]
Apr 24 18:45:33.90: [ 269]: --> [20:+FCS:1,3,0,0,0,0,0,0]
Apr 24 18:45:33.90: [ 269]: REMOTE wants 9600 bit/s
Apr 24 18:45:33.90: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
Apr 24 18:45:33.90: [ 269]: REMOTE wants A4 page length (297 mm)
Apr 24 18:45:33.90: [ 269]: REMOTE wants 7.7 line/mm
Apr 24 18:45:33.90: [ 269]: REMOTE wants 1-D MR
Apr 24 18:45:35.67: [ 269]: --> [7:CONNECT]
Apr 24 18:45:35.67: [ 269]: RECV: begin page
Apr 24 18:45:35.69: [ 269]: RECV: send trigger 022
Apr 24 18:45:35.69: [ 269]: <-- data [1]
Apr 24 18:45:53.05: [ 269]: RECV: 2259 total lines, 5 bad lines, 2 consecutive bad lines
Apr 24 18:45:53.05: [ 269]: --> [17:+FPS:1,2268,0,0,0]
Apr 24 18:45:54.39: [ 269]: --> [6:+FET:0]
Apr 24 18:45:54.39: [ 269]: RECV recv MPS (more pages, same document)
Apr 24 18:45:54.39: [ 269]: --> [2:OK]
Apr 24 18:45:54.42: [ 269]: RECV send MCF (message confirmation)
Apr 24 18:45:54.43: [ 269]: RECV FAX (00000026): from 7 812 2479988, page 1 in 0:23, A4, 7.7 line/mm, 1-D MR
Apr 24 18:45:54.43: [ 269]: <-- [7:AT+FDR\r]
Apr 24 18:45:56.37: [ 269]: --> [7:CONNECT]
Apr 24 18:45:56.37: [ 269]: RECV: begin page
Apr 24 18:45:56.37: [ 269]: RECV: send trigger 022
Apr 24 18:45:56.37: [ 269]: <-- data [1]
Apr 24 18:46:22.65: [ 269]: RECV: 2259 total lines, 10 bad lines, 2 consecutive bad lines
Apr 24 18:46:22.65: [ 269]: --> [17:+FPS:1,2270,0,0,0]
Apr 24 18:46:24.07: [ 269]: --> [6:+FET:2]
Apr 24 18:46:24.07: [ 269]: RECV recv EOP (no more pages or documents)
Apr 24 18:46:24.07: [ 269]: --> [2:OK]
Apr 24 18:46:24.07: [ 269]: RECV send MCF (message confirmation)
Apr 24 18:46:24.08: [ 269]: RECV FAX (00000026): from 7 812 2479988, page 2 in 0:30, A4, 7.7 line/mm, 1-D MR
Apr 24 18:46:24.08: [ 269]: RECV FAX (00000026): recvq/fax00037.tif from 7 812 2479988, route to <unspecified>, 2 pages in 0:55
Apr 24 18:46:24.11: [ 269]: <-- [7:AT+FDR\r]
Apr 24 18:46:27.08: [ 269]: --> [7:+FHS:00]
Apr 24 18:46:27.08: [ 269]: REMOTE HANGUP: Normal and proper end of connection (code 0)
Apr 24 18:46:27.08: [ 269]: RECV FAX: bin/faxrcvd "recvq/fax00037.tif" "cuaa1" "00000026" ""
Apr 24 18:46:29.44: [ 269]: RECV FAX: end
Apr 24 18:46:29.44: [ 269]: SESSION END
bad log---------------------------------------------------------------------
Apr 24 22:44:12.28: [ 269]: SESSION BEGIN 00000027 78121832349
Apr 24 22:44:12.29: [ 269]: <-- [4:ATA\r]
Apr 24 22:44:45.24: [ 269]: --> [4:+FCO]
Apr 24 22:44:45.24: [ 269]: ANSWER: FAX CONNECTION
Apr 24 22:44:45.26: [ 269]: RECV FAX: begin
Apr 24 22:44:47.00: [ 269]: --> [27:+FTI:" 812 4230235"]
Apr 24 22:44:47.00: [ 269]: REMOTE TSI "812 4230235"
Apr 24 22:44:47.33: [ 269]: --> [20:+FCS:0,3,0,2,0,0,0,0]
Apr 24 22:44:47.33: [ 269]: REMOTE wants 9600 bit/s
Apr 24 22:44:47.33: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
Apr 24 22:44:47.33: [ 269]: REMOTE wants unlimited page length
Apr 24 22:44:47.33: [ 269]: REMOTE wants 3.85 line/mm
Apr 24 22:44:47.33: [ 269]: REMOTE wants 1-D MR
Apr 24 22:44:47.48: [ 269]: --> [2:OK]
Apr 24 22:44:47.48: [ 269]: <-- [7:AT+FDR\r]
Apr 24 22:44:54.71: [ 269]: --> [7:+FHS:72]
Apr 24 22:44:54.71: [ 269]: REMOTE HANGUP: COMREC error (code 72)
Apr 24 22:44:54.71: [ 269]: RECV FAX (00000027): recvq/fax00038.tif from 812 4230235, route to <unspecified>, 0 pages in 0:09
Apr 24 22:44:54.72: [ 269]: RECV FAX: COMREC error
Apr 24 22:44:54.74: [ 269]: RECV FAX (00000027): session with 812 4230235 terminated abnormally: COMREC error
Apr 24 22:44:54.74: [ 269]: RECV FAX: bin/faxrcvd "recvq/fax00038.tif" "cuaa1" "00000027" "COMREC error"
Apr 24 22:44:55.81: [ 269]: RECV FAX: end
Apr 24 22:44:55.82: [ 269]: SESSION END
-------------------------------------------------------------------------------
Apr 25 22:51:20.38: [ 269]: SESSION BEGIN 00000036 78121832349
Apr 25 22:51:20.39: [ 269]: <-- [4:ATA\r]
Apr 25 22:51:48.13: [ 269]: --> [4:+FCO]
Apr 25 22:51:48.13: [ 269]: ANSWER: FAX CONNECTION
Apr 25 22:51:48.13: [ 269]: MODEM input buffering enabled
Apr 25 22:51:48.15: [ 269]: RECV FAX: begin
Apr 25 22:51:49.89: [ 269]: --> [27:+FTI:" 812 4230235"]
Apr 25 22:51:49.89: [ 269]: REMOTE TSI "812 4230235"
Apr 25 22:51:50.22: [ 269]: --> [20:+FCS:0,3,0,2,0,0,0,0]
Apr 25 22:51:50.22: [ 269]: REMOTE wants 9600 bit/s
Apr 25 22:51:50.22: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
Apr 25 22:51:50.22: [ 269]: REMOTE wants unlimited page length
Apr 25 22:51:50.22: [ 269]: REMOTE wants 3.85 line/mm
Apr 25 22:51:50.22: [ 269]: REMOTE wants 1-D MR
Apr 25 22:51:50.37: [ 269]: --> [2:OK]
Apr 25 22:51:50.37: [ 269]: <-- [7:AT+FDR\r]
Apr 25 22:54:50.38: [ 269]: MODEM TIMEOUT: reading line from modem
Apr 25 22:54:50.38: [ 269]: REMOTE HANGUP: Unspecified Phase C error, including too much delay between TCF and +FDR command (code 90)
Apr 25 22:54:50.38: [ 269]: RECV FAX (00000036): recvq/fax00041.tif from 812 4230235, route to <unspecified>, 0 pages in 3:02
Apr 25 22:54:50.39: [ 269]: RECV FAX: Unspecified Phase C error, including too much delay between TCF and +FDR command
Apr 25 22:54:50.39: [ 269]: <-- [7:AT+FKS\r]
Apr 25 22:54:51.91: [ 269]: --> [7:+FHS:02]
Apr 25 22:54:51.91: [ 269]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2)
Apr 25 22:54:51.91: [ 269]: --> [2:OK]
Apr 25 22:54:51.93: [ 269]: RECV FAX (00000036): session with 812 4230235 terminated abnormally: Unspecified Phase C error, including too much delay between TCF and +FDR command
Apr 25 22:54:51.93: [ 269]: RECV FAX: bin/faxrcvd "recvq/fax00041.tif" "cuaa1" "00000036" "Unspecified Phase C error, including too much delay between TCF and +FDR command"
Apr 25 22:54:52.65: [ 269]: RECV FAX: end
Apr 25 22:54:52.96: [ 269]: SESSION END
-------------------------------------------------------------------------------
May 07 19:02:54.44: [ 269]: SESSION BEGIN 00000080 78121832349
May 07 19:02:54.45: [ 269]: <-- [4:ATA\r]
May 07 19:03:11.79: [ 269]: --> [4:+FCO]
May 07 19:03:11.82: [ 269]: ANSWER: FAX CONNECTION
May 07 19:03:11.82: [ 269]: MODEM input buffering enabled
May 07 19:03:11.86: [ 269]: RECV FAX: begin
May 07 19:03:13.55: [ 269]: --> [27:+FTI:" 812 4230235"]
May 07 19:03:13.55: [ 269]: REMOTE TSI "812 4230235"
May 07 19:03:13.88: [ 269]: --> [20:+FCS:0,3,0,2,0,0,0,0]
May 07 19:03:13.88: [ 269]: REMOTE wants 9600 bit/s
May 07 19:03:13.88: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
May 07 19:03:13.88: [ 269]: REMOTE wants unlimited page length
May 07 19:03:13.88: [ 269]: REMOTE wants 3.85 line/mm
May 07 19:03:13.88: [ 269]: REMOTE wants 1-D MR
May 07 19:03:14.01: [ 269]: --> [2:OK]
May 07 19:03:14.03: [ 269]: <-- [7:AT+FDR\r]
May 07 19:03:21.01: [ 269]: --> [27:+FTI:" 812 4230235"]
May 07 19:03:21.01: [ 269]: REMOTE TSI "812 4230235"
May 07 19:03:21.34: [ 269]: --> [20:+FCS:0,2,0,2,0,0,0,0]
May 07 19:03:21.34: [ 269]: REMOTE wants 7200 bit/s
May 07 19:03:21.34: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
May 07 19:03:21.34: [ 269]: REMOTE wants unlimited page length
May 07 19:03:21.34: [ 269]: REMOTE wants 3.85 line/mm
May 07 19:03:21.34: [ 269]: REMOTE wants 1-D MR
May 07 19:03:28.44: [ 269]: --> [27:+FTI:" 812 4230235"]
May 07 19:03:28.44: [ 269]: REMOTE TSI "812 4230235"
May 07 19:03:28.76: [ 269]: --> [20:+FCS:0,1,0,2,0,0,0,0]
May 07 19:03:28.76: [ 269]: REMOTE wants 4800 bit/s
May 07 19:03:28.76: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
May 07 19:03:28.76: [ 269]: REMOTE wants unlimited page length
May 07 19:03:28.76: [ 269]: REMOTE wants 3.85 line/mm
May 07 19:03:28.76: [ 269]: REMOTE wants 1-D MR
May 07 19:03:35.89: [ 269]: --> [27:+FTI:" 812 4230235"]
May 07 19:03:35.89: [ 269]: REMOTE TSI "812 4230235"
May 07 19:03:36.22: [ 269]: --> [20:+FCS:0,0,0,2,0,0,0,0]
May 07 19:03:36.22: [ 269]: REMOTE wants 2400 bit/s
May 07 19:03:36.22: [ 269]: REMOTE wants page width 1728 pixels in 215 mm
May 07 19:03:36.22: [ 269]: REMOTE wants unlimited page length
May 07 19:03:36.22: [ 269]: REMOTE wants 3.85 line/mm
May 07 19:03:36.22: [ 269]: REMOTE wants 1-D MR
May 07 19:03:43.03: [ 269]: --> [7:+FHS:72]
May 07 19:03:43.03: [ 269]: REMOTE HANGUP: COMREC error (code 72)
May 07 19:03:43.03: [ 269]: RECV FAX (00000080): recvq/fax00052.tif from 812 4230235, route to <unspecified>, 0 pages in 0:32
May 07 19:03:43.05: [ 269]: RECV FAX: COMREC error
May 07 19:03:43.07: [ 269]: RECV FAX (00000080): session with 812 4230235 terminated abnormally: COMREC error
May 07 19:03:43.07: [ 269]: RECV FAX: bin/faxrcvd "recvq/fax00052.tif" "cuaa1" "00000080" "COMREC error"
May 07 19:03:44.02: [ 269]: RECV FAX: end
May 07 19:03:44.03: [ 269]: SESSION END
-------------------------------------------------------------------------------
I have tryed to
examine source code but find only the t.30 protol place where it is occuring.
(faxd/Class2Recv.c++ during DCS anlisis after FDR command given). May be
modem anouncing wrong capabilities and I should restrict them or something
wrong in HylaFaX configuration? Please answer somthing.
Excuse me for my bad English.
Good by.
Fedor Snegov.
