Re: flexfax: Failure to train at 2400 bps or +FMINSP value

[Tim Rice <tim@trr.metro.NET>]

On Sat, 21 Mar 1998, Tobias Richter wrote:

> Hi,
> 
> I have problems with outbound use of my new MultiTech MT2834ZDXI/0314B.
> Most was solved by ugrading to hylafax-v4.0pl2, but this one still
> remains:
> 
> Your facsimile job to 02319922959 was not sent because:
>     Failure to train at 2400 bps or +FMINSP value
> 
>     ---- Transcript of session follows ----
> Mar 21 02:32:07.20: [25043]: SESSION BEGIN 00000466 492319922959
> Mar 21 02:32:07.20: [25043]: SEND FAX: JOB 62 DEST 02319922959 COMMID 00000466
> Mar 21 02:32:07.20: [25043]: DELAY 2600 ms
> Mar 21 02:32:09.81: [25043]: <-- [17:ATX3E0V1Q0S0=0H0\r]
> Mar 21 02:32:10.02: [25043]: --> [16:ATX3E0V1Q0S0=0H0]
> Mar 21 02:32:10.02: [25043]: --> [2:OK]
> Mar 21 02:32:10.02: [25043]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
                                                     ^^^^^^
This may not fix your problem but be aware that &D3 is broken on
the MT2834 modems. The workaround is to use &C4 in place of &C1.

[snip]
> Thanks for any help
> tobias
> 

--
Tim Rice			Multitalents	(707) 887-1469 (voice)
tim@trr.metro.net