ZyXEL 1496 won't answer

To: <flexfax@sgi.com>
Subject: flexfax: ZyXEL 1496 won't answer
From: "Alan Sparks" <asparks@nss.harris.com>
Date: Mon, 16 Mar 1998 12:35:53 -0800

Running HylaFAX 4pl1 on SunOS 4.1.4...

I've a ZyXEL 1496 set up here, good luck sending fax.  Have a faxgetty
running OK on /dev/cua0 which shows "running and idle," with inbound service
enabled.  So far, so good.

But it will not answer an incoming call.  (using the stock config file).
RingsBeforeAnswer is set to 1.  When I call the modem, faxstat shows
"Listening to rings from modem", and I see a LCK..cua0 file created (in my
/var/spool/locks dir).  Lock file disappears when call is discontinued, and
faxstat returns to "running and idle."

Any ideas why this won't pick up?  Any thoughts are appreciated.
-Alan

=============
Alan Sparks, IS Engineering Support
<asparks@nss.harris.com>
Harris Network Support Systems, Camarillo CA     (805) 389-2430

Prev by Date: HylaFAX 4.0b2 on Linux 2.0.32 with USRobotics Sportster V.34+ fax
Next by Date: Re: destctrls
Prev by thread: HylaFAX 4.0b2 on Linux 2.0.32 with USRobotics Sportster V.34+ fax
Next by thread: Re: ZyXEL 1496 won't answer
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services