|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Further LOGs from AT+FDIS problems
Further information with regard to my problem with the Multitech modem
running Hylafax. I have done alot of reading of the various man pages and
FAQs etc. I have now changed the Class2DCCQueryCmd and this is reflected in
the log but it still seems to ignore this and send an invalid FDIS command.
I have included a full log extract with the Server and Session values set
to allow more info to be put into the log and would be grateful if anyone
could help me out further with this problem.
As already stated I am running Hylafax Ver 4.0p10 on HP-UX Ver 10.20 on a
"D" class HP9000 server.
BTW Happy New Year to you all.
<--------------------BEGIN LOG EXTRACT----------------------------->
Jan 02 11:06:44.38: [18844]: SESSION BEGIN
Jan 02 11:06:44.38: [18844]: MODEM set DTR OFF
Jan 02 11:06:44.38: [18844]: MODEM set baud rate: 0 baud (flow control
unchanged)
Jan 02 11:06:44.39: [18844]: DELAY 2600 ms
Jan 02 11:06:46.99: [18844]: MODEM set DTR ON
Jan 02 11:06:46.99: [18844]: MODEM set baud rate: 38400 baud, input flow
RTS/CTS, output flow RTS/CTS
Jan 02 11:06:46.99: [18844]: MODEM flush i/o
Jan 02 11:06:46.99: [18844]: <-- [14:ATE0V1Q0S0=0H0]
Jan 02 11:06:46.99: [18844]: <-- <14:41 54 45 30 56 31 51 30 53 30 3D 30 48
30>
Jan 02 11:06:46.99: [18844]: <-- <1:0D>
Jan 02 11:06:47.15: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:47.15: [18844]: --> [2:OK]
Jan 02 11:06:47.15: [18844]: <-- [20:ATS8=2S7=60&E4&D3&C1]
Jan 02 11:06:47.15: [18844]: <-- <20:41 54 53 38 3D 32 53 37 3D 36 30 26 45
34 26 44 33 26 43 31>
Jan 02 11:06:47.15: [18844]: <-- <1:0D>
Jan 02 11:06:47.31: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:47.31: [18844]: --> [2:OK]
Jan 02 11:06:47.31: [18844]: <-- [11:AT+FCLASS=2]
Jan 02 11:06:47.31: [18844]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 32>
Jan 02 11:06:47.31: [18844]: <-- <1:0D>
Jan 02 11:06:47.46: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:47.46: [18844]: --> [2:OK]
Jan 02 11:06:47.46: [18844]: <-- [9:AT+FTBC=0]
Jan 02 11:06:47.46: [18844]: <-- <9:41 54 2B 46 54 42 43 3D 30>
Jan 02 11:06:47.46: [18844]: <-- <1:0D>
Jan 02 11:06:47.62: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:47.62: [18844]: --> [2:OK]
Jan 02 11:06:47.62: [18844]: <-- [9:AT+FBOR=0]
Jan 02 11:06:47.62: [18844]: <-- <9:41 54 2B 46 42 4F 52 3D 30>
Jan 02 11:06:47.62: [18844]: <-- <1:0D>
Jan 02 11:06:47.78: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:47.78: [18844]: --> [2:OK]
Jan 02 11:06:47.78: [18844]: <-- [12:AT+FPHCTO=30]
Jan 02 11:06:47.78: [18844]: <-- <12:41 54 2B 46 50 48 43 54 4F 3D 33 30>
Jan 02 11:06:47.78: [18844]: <-- <1:0D>
Jan 02 11:06:47.94: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:47.94: [18844]: --> [2:OK]
Jan 02 11:06:47.94: [18844]: <-- [9:AT+FBUG=1]
Jan 02 11:06:47.94: [18844]: <-- <9:41 54 2B 46 42 55 47 3D 31>
Jan 02 11:06:47.94: [18844]: <-- <1:0D>
Jan 02 11:06:48.10: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:48.10: [18844]: --> [2:OK]
Jan 02 11:06:48.10: [18844]: <-- [23:AT+FDCC=1,5,2,2,0,0,0,4]
**ABOVE LINE USES THE Class2DCCQuery set command
Jan 02 11:06:48.10: [18844]: <-- <23:41 54 2B 46 44 43 43 3D 31 2C 35 2C 32
2C 32 2C 30 2C 30 2C 30 2C 34>
Jan 02 11:06:48.10: [18844]: <-- <1:0D>
Jan 02 11:06:48.26: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:48.26: [18844]: --> [2:OK]
Jan 02 11:06:48.26: [18844]: <-- [4:ATM0]
Jan 02 11:06:48.26: [18844]: <-- <4:41 54 4D 30>
Jan 02 11:06:48.26: [18844]: <-- <1:0D>
Jan 02 11:06:48.41: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:48.41: [18844]: --> [2:OK]
Jan 02 11:06:48.41: [18844]: STATE CHANGE: RUNNING -> SENDING
Jan 02 11:06:48.43: [18844]: <-- [11:AT+FCLASS=2]
Jan 02 11:06:48.43: [18844]: <-- <11:41 54 2B 46 43 4C 41 53 53 3D 32>
Jan 02 11:06:48.43: [18844]: <-- <1:0D>
Jan 02 11:06:48.59: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:48.59: [18844]: --> [2:OK]
Jan 02 11:06:48.59: [18844]: <-- [9:AT+FTBC=0]
Jan 02 11:06:48.59: [18844]: <-- <9:41 54 2B 46 54 42 43 3D 30>
Jan 02 11:06:48.59: [18844]: <-- <1:0D>
Jan 02 11:06:48.75: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:48.75: [18844]: --> [2:OK]
Jan 02 11:06:48.75: [18844]: <-- [9:AT+FBOR=0]
Jan 02 11:06:48.75: [18844]: <-- <9:41 54 2B 46 42 4F 52 3D 30>
Jan 02 11:06:48.75: [18844]: <-- <1:0D>
Jan 02 11:06:48.91: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:48.91: [18844]: --> [2:OK]
Jan 02 11:06:48.91: [18844]: <-- [12:AT+FPHCTO=30]
Jan 02 11:06:48.91: [18844]: <-- <12:41 54 2B 46 50 48 43 54 4F 3D 33 30>
Jan 02 11:06:48.91: [18844]: <-- <1:0D>
Jan 02 11:06:49.07: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:49.07: [18844]: --> [2:OK]
Jan 02 11:06:49.07: [18844]: <-- [9:AT+FBUG=1]
Jan 02 11:06:49.07: [18844]: <-- <9:41 54 2B 46 42 55 47 3D 31>
Jan 02 11:06:49.07: [18844]: <-- <1:0D>
Jan 02 11:06:49.22: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:49.22: [18844]: --> [2:OK]
Jan 02 11:06:49.22: [18844]: <-- [23:AT+FDCC=1,5,2,2,0,0,0,4]
**ABOVE LINE USES THE Class2DCCQuery set command - this is set again and I
suppose it takes it from the Class2 modem config file as opposed to the
previous FDCC command which is taken from the config.tty command
Jan 02 11:06:49.22: [18844]: <-- <23:41 54 2B 46 44 43 43 3D 31 2C 35 2C 32
2C 32 2C 30 2C 30 2C 30 2C 34>
Jan 02 11:06:49.22: [18844]: <-- <1:0D>
Jan 02 11:06:49.38: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:49.38: [18844]: --> [2:OK]
Jan 02 11:06:49.38: [18844]: <-- [21:AT+FLID="01714017208"]
Jan 02 11:06:49.38: [18844]: <-- <21:41 54 2B 46 4C 49 44 3D 22 30 31 37 31
34 30 31 37 32 30 38 22>
Jan 02 11:06:49.38: [18844]: <-- <1:0D>
Jan 02 11:06:49.54: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:06:49.54: [18844]: --> [2:OK]
Jan 02 11:06:49.54: [18844]: DIAL 01529413886
Jan 02 11:06:49.54: [18844]: <-- [16:ATDT01529413886@]
Jan 02 11:06:49.54: [18844]: <-- <16:41 54 44 54 30 31 35 32 39 34 31 33 38
38 36 40>
Jan 02 11:06:49.54: [18844]: <-- <1:0D>
Jan 02 11:07:06.89: [18844]: --> <9:0D 0A 2B 46 43 4F 4E 0D 0A>
Jan 02 11:07:06.89: [18844]: --> [5:+FCON]
Jan 02 11:07:09.02: [18844]: --> <78:0D 0A 2B 46 48 52 3A 46 46 20 30 33 20
34 30 20 33 39 20 33 36 20 33 34 20 33 35 20 33 31 20 33 34 20 32 30 20
33 39 20 33 32 20 33 35 20 33 31 20 32 30 20 33 34 20 33 34 20 32 42 20 32
30 20 32 30 20 32 30 20 32 30 20 32 30 20 0D 0A>
Jan 02 11:07:09.02: [18844]: --> [74:+FHR:FF 03 40 39 36 34 35 31 34 20 39
32 35 31 20 34 34 2B 20 20 20 20 20 ]
Jan 02 11:07:09.29: [18844]: --> <127:0D 0A 2B 46 48 52 3A 46 46 20 31 33
20 38 30 20 30 30 20 43 45 20 42 38 20 34 34 20 0D 0A 0D 0A 2B 46 4E 53
46 3A 41 44 20 30 30 20 33 36 20 34 30 20 38 30 20 32 38 20 30 31 20 46 38
20 0D 0A 0D 0A 2B 46 43 53 49 3A 22 20 20 20 20 20 2B 34 34 20 31 35
32 39 20 34 31 35 34 36 39 22 0D 0A 0D 0A 2B 46 44 49 53 3A 31 2C 33 2C 30
2C 32 2C 31 2C 32 2C 30 2C 34 0D 0A 0D 0A 4F 4B 0D 0A>
Jan 02 11:07:09.29: [18844]: --> [26:+FHR:FF 13 80 00 CE B8 44 ]
Jan 02 11:07:09.29: [18844]: --> [30:+FNSF:AD 00 36 40 80 28 01 F8 ]
Jan 02 11:07:09.29: [18844]: REMOTE NSF "AD 00 36 40 80 28 01 F8"
Jan 02 11:07:09.29: [18844]: --> [28:+FCSI:" +44 1529 415469"]
Jan 02 11:07:09.29: [18844]: REMOTE CSI "+44 1529 415469"
**LINE BELOW may be pointer to problem
Jan 02 11:07:09.29: [18844]: --> [21:+FDIS:1,3,0,2,1,2,0,4]
Jan 02 11:07:09.29: [18844]: --> [2:OK]
Jan 02 11:07:09.29: [18844]: REMOTE best rate 9600 bit/s
Jan 02 11:07:09.29: [18844]: REMOTE max page width 1728 pixels in 215 mm
Jan 02 11:07:09.29: [18844]: REMOTE max unlimited page length
Jan 02 11:07:09.29: [18844]: REMOTE best vres 7.7 line/mm
Jan 02 11:07:09.29: [18844]: REMOTE best format 2-D MR
Jan 02 11:07:09.29: [18844]: REMOTE best 20 ms, 10 ms/scanline
Jan 02 11:07:09.30: [18844]: REMOTE does not support PostScript transfer
Jan 02 11:07:09.30: [18844]: USE 9600 bit/s
Jan 02 11:07:09.30: [18844]: USE 20 ms, 10 ms/scanline
Jan 02 11:07:09.30: [18844]: SEND file "docq/doc3840.cover;70"
Jan 02 11:07:09.30: [18844]: USE page width 1728 pixels in 215 mm
Jan 02 11:07:09.30: [18844]: USE unlimited page length
Jan 02 11:07:09.30: [18844]: USE 3.85 line/mm
Jan 02 11:07:09.30: [18844]: USE 2-D MR
**Modem sent string below with 5th value ie. df (data compression) being
the value that causes the problem.
**If this value was 0 the command would be valid
Jan 02 11:07:09.30: [18844]: <-- [23:AT+FDIS=0,3,0,2,1,0,0,4]
Jan 02 11:07:09.30: [18844]: <-- <23:41 54 2B 46 44 49 53 3D 30 2C 33 2C 30
2C 32 2C 31 2C 30 2C 30 2C 34>
Jan 02 11:07:09.30: [18844]: <-- <1:0D>
Jan 02 11:07:09.46: [18844]: --> <9:0D 0A 45 52 52 4F 52 0D 0A>
Jan 02 11:07:09.46: [18844]: --> [5:ERROR]
**Modem errors based on AT+FDIS command
Jan 02 11:07:09.46: [18844]: MODEM Command error
Jan 02 11:07:09.46: [18844]: <-- [5:AT+FK]
Jan 02 11:07:09.46: [18844]: <-- <5:41 54 2B 46 4B>
Jan 02 11:07:09.46: [18844]: <-- <1:0D>
Jan 02 11:07:10.63: [18844]: --> <18:0D 0A 2B 46 48 54 3A 46 46 20 31 33 20
46 42 20 0D 0A>
Jan 02 11:07:10.63: [18844]: --> [14:+FHT:FF 13 FB ]
Jan 02 11:07:11.10: [18844]: --> <11:0D 0A 2B 46 48 4E 47 3A 32 0D 0A>
Jan 02 11:07:11.10: [18844]: --> [7:+FHNG:2]
Jan 02 11:07:11.10: [18844]: REMOTE HANGUP: Call aborted, from +FK or
<CAN> (code 2)
Jan 02 11:07:11.50: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:07:11.50: [18844]: --> [2:OK]
Jan 02 11:07:11.50: [18844]: <-- [4:ATH0]
Jan 02 11:07:11.51: [18844]: <-- <4:41 54 48 30>
Jan 02 11:07:11.51: [18844]: <-- <1:0D>
Jan 02 11:07:11.66: [18844]: --> <6:0D 0A 4F 4B 0D 0A>
Jan 02 11:07:11.66: [18844]: --> [2:OK]
Jan 02 11:07:11.66: [18844]: MODEM set DTR OFF
Jan 02 11:07:11.66: [18844]: MODEM set baud rate: 0 baud (flow control
unchanged)
Jan 02 11:07:11.66: [18844]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 02 11:07:11.66: [18844]: SESSION END
<--------------------END LOG EXTRACT----------------------------->
--------------------
Resistance is Futile
--------------------
---o^o--- ( Conrad EJ Gonsalves aka hawkmoon@mail.bogo.co.uk )
| X | The Keeper of Tanelorn
---[o]--- Check out my
! ! WEB SITE
! ! - Tanelorn -
! ! The Last Resting Place
!_! * www.tanelorn.co.uk *
Please CC replies to my hawkmoon email address as well as my work email
address. Many thanks ....
