|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: Update on rpm
-----BEGIN PGP SIGNED MESSAGE-----
On Fri, 24 Oct 1997, Ramana Juvvadi wrote:
> As per the feedback of people, here is the status of RPM. The latest
> one in hylafax-4.0-6. I added README.rpm in the documentation
> about the differences between rpm and the tar versions.
>
I detect a problem with it: it demands the presence of ghostscript fonts,
version 5.02 or better, installed with RPM. This is unnecessary: version
2.62 or better is fine for normal HylaFAX use. Also, since the default RedHat
distribution is at level 4.02 or so and you're demanding a higher level,
you *really* need to put in a pointer to the more recent version if you're
going to demand it.
It might be simpler to leave ghostscript out of the RPM requirements. There
are *other* utilities to translate Postscript <-> tiffg3, and that should
be the users' option at install time.
Nico Garcia
Engineer, CIRL
Mass. Eye and Ear Infirmary
raoul@cirl.meei.harvard.edu
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBNFJkSj/+ItycgIJRAQFXxQP/aUlfiGTn/OsvW1NPAXvwwEOpNj9UIFqY
8D4hcgQOxM3rqAfQprP7DybbtRm26uoSp0GlzFr3sAS2x42+33gKa1AyW45SYjgP
kfQldiPB/0ttPS7Mf035EhcQavZFT0mohtbEWF4SG0quxpjhWcizfaFi9EE6AVTb
BYwTBC6OIyw=
=6XPo
-----END PGP SIGNATURE-----
