Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Adaptive answer.




> Try idling in class 0 (ie data) mode instead, and this may eliminate
> the manual switching with ATO that appears that you're having to do.
> At a guess, you could possibly enable this with

Actually that is what I do.  Here's an extract from the log that shows
faxgetty setting up the modem for answer:

Oct 21 23:44:52 raindrop FaxGetty[10178]: MODEM Supports 40 ms/scanline
Oct 21 23:44:52 raindrop FaxGetty[10178]: <-- [9:AT+FRM=?\r]
Oct 21 23:44:52 raindrop FaxGetty[10178]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]
Oct 21 23:44:52 raindrop FaxGetty[10178]: --> [2:OK]
Oct 21 23:44:52 raindrop FaxGetty[10178]: <-- [12:AT+FCLASS=1\r]
Oct 21 23:44:52 raindrop FaxGetty[10178]: --> [2:OK]
Oct 21 23:44:52 raindrop FaxGetty[10178]: <-- [18:AT+FCLASS=0+FAA=1\r]
Oct 21 23:44:52 raindrop FaxGetty[10178]: --> [2:OK]
Oct 21 23:44:52 raindrop FaxGetty[10178]: MODEM  /
Oct 21 23:44:52 raindrop FaxGetty[10178]: <-- [5:ATM0\r]
Oct 21 23:44:52 raindrop FaxGetty[10178]: --> [2:OK]
Oct 21 23:44:52 raindrop FaxGetty[10178]: MODEM input buffering disabled


                                                      ooooo
 -- Tom Unger                                       oo\    oo
    Wet Weather Consulting                         o   \     o
    (206)325-7403                                 o  B I\V I  o
                                                   o     \   o
                                                    oo    \oo
                                                      ooooo

On Mon, 20 Oct 1997, Jonathan Chen wrote:

> Date: Mon, 20 Oct 1997 13:18:54 +1300 (NZDT)
> From: Jonathan Chen <jonc@pinnacle.co.nz>
> To: Thomas Unger <unger@raindrop.seaslug.org>
> Cc: flexfax@sgi.com
> Subject: Re: flexfax: Adaptive answer.
> 
> On Fri, 17 Oct 1997, Thomas Unger wrote:
> 
> > Hi again.  I'm running HylaFax 4.0 on freebsd with a ZOOM K56.
> > 
> > I've hooked up this modem and have started working with getting it to
> > work.  In hand tests it seems to do adaptive answer BUT for data mode
> > I need to have the following occur:
> > 
> >   1)  modem says "RING"
> >   2)  send command "ATA"
> >   3)  modem says "DATA"
> >   4)  send command "ATO"
> >   5)  modem says "CONNECT xxxx"
> 
> Try idling in class 0 (ie data) mode instead, and this may eliminate
> the manual switching with ATO that appears that you're having to do.
> At a guess, you could possibly enable this with
> 
> 	ModemSetupAACmd:	AT+FAA=1;AT+FCLASS=0
> 
> or
> 	ModemSetupAACmd:	AT+FAA=1+FCLASS=0
> 
> (some modems hate the `;')
> --
> Jonathan Chen                          e-mail : jonc@pinnacle.co.nz
>   Pinnacle Software Ltd                Voice  : +64.9.415.4460
>   Auckland, New Zealand                Fax    : +64.9.415.4250
> 



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services