Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: MultiTech MT2834ZDXV recommendation?



Here it is:

at+fmfr?
+FMFR=Multi-Tech Systems

OK
at+FMDL?
+FMDL=MT2834ZDX

OK
ati1
0316A 

NORTH AMERICAN 

OK
ati4
02-26-1997 14:57


Note for those with Multitechs, ATI1 gives you firmare release and ATI4 gives
release date.

I had the devil of a time getting ServerTracing to work with an setting of 13.  
I logged it to local5 and had /etc/sysconf.conf logging to /usr/fax/etc/syslog
which is where I have HylaFAX installed.  Never got a single message in either
that or /var/log/messages.

I restarted faxq after modifiying etc/config to reflect the above, and
syslogd take the new syslog.conf.

Any suggestions on how to get SystemTracing to work?

Patrick Gardella

On 22-Oct-97 Prof. Julio C. Spinelli wrote:
>Thanks very much for the information,
>
>As there has been somebody else saying that they are having problems with
>this same modem, would it be possible for you to let us know the firmware
>release and revision date? Hylafax normally prints this out in one of the
>log files, during modem reset.
>
>Out of curiosisty what is the failure rate for all causes, except wrong
>number or no carrier that you have with these modems?
>
>With USR sportster I am running at around 8-10% and it is unacceptable
>
>Thanks,
>
>Julio
>
>On Wed, 22 Oct 1997, Patrick Gardella wrote:
>
>> I do send 2000+ a day.  Our record day is 4041 in 24 hours on 7 modems.  All 
the
>> faxes are 1 to 2 pages, no cover sheets and all are US (local) numbers.
>> 
>> Here is my config file for one of the modems:  (The FAXnumber and LocalId are
 
>> commented out :)
>> 
>> 
>> Patrick
>> _________________
>> 
>> CountryCode:            1
>> AreaCode:               703
>> FAXNumber:              +xxxxx
>> LongDistancePrefix:     1
>> InternationalPrefix:    011
>> DialStringRules:        "etc/dialrules"
>> ServerTracing:          1
>> SessionTracing:         11
>> RecvFileMode:           0600
>> LogFileMode:            0600
>> DeviceMode:             0660
>> RingsBeforeAnswer:      0 
>> SpeakerVolume:          off
>> GettyArgs:              "std.%s"
>> LocalIdentifier:        "xxxx"
>> TagLineFont:            etc/lutRS18.pcf
>> TagLineFormat:          "From %%l|%c|Page %%p of %%t"
>> MaxRecvPages:           25
>> # 
>> # 
>> # Modem-related stuff: should reflect modem command interface
>> # and hardware connection/cabling (e.g. flow control).
>> #
>> ModemType:              Class2          # use class 2 interface
>> ModemRate:              38400           # lock rate for DCE-DTE communication
>> ModemFlowControl:       rtscts          # default
>> #
>> ModemHardFlowCmd:       AT&E4           # hardware flow control
>> ModemSoftFlowCmd:       AT&E5           # software flow control
>> ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
>> ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or n
ot)
>> ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
>> #
>> # NB: some models get confused by the @
>> #
>> ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for silence
>> #
>> Class2RecvDataTrigger:  "\022"          # character sent to modem to start re
cv
>> 
>> 
>> On 22-Oct-97 Prof. Julio C. Spinelli wrote:
>> >Dear Patrick,
>> >
>> >Could you please provide me with the config file that you are using. I
>> >would like to try the Multitech modem. Do you really send 2000 faxes per
>> >day average? Whow! Are they all to the USA or international?
>> >
>> >Thanks very much for this help,
>> >
>> >Modem vendors will learn to market products that really work thaks to the
>> >exchange of info that you are doing. Thanks again,
>> >
>> >Julio
>> >
>> >On Wed, 22 Oct 1997, Patrick Gardella wrote:
>> >
>> >> I am using 8 MT2834ZDX modems are they have not given me a problem yet!  W
hat
>> >> is the "v" mean?  It this the 28.8 -33.6 update?
>> >> 
>> >> Been running 24x7 for 3 months at an average of 2000 faxes outgoing. (I do
n't
>> >> allow any incoming.)
>> >> 
>> >> Patrick
>> >> 
>> >> On 21-Oct-97 Larry Pyeatt wrote:
>> >> >Hello,
>> >> >  I have given up on my USR Sportster and am looking for a modem that
>> >> >works.
>> >> >Has anyone used the MT2834ZDXV with hylafax?  If so, does it work well?
>> >> >
>> >> >Thanks.
>> >> >
>> >> >--
>> >> >Larry D. Pyeatt                     All standard disclaimers apply.
>> >> >pyeatt@cs.colostate.edu             Void where prohibited.
>> >> >http://www.cs.colostate.edu/~pyeatt
>> >> 
>> 



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services