Re: flexfax: Garbled communication

[Nico Garcia <raoul@cirl.meei.harvard.edu>]

-----BEGIN PGP SIGNED MESSAGE-----

On Sun, 21 Sep 1997, Dave Wreski wrote:

> Sep 21 09:33:18 apps FaxSend[1209]: SEND FAILED: Unspecified Transmit
> Phase B error
> 
> Hopefully someone has seen this before, as I've spent quite a few hours
> working with it now..  This is HylaFAX-4.0pl1-1 RPM for Linux 2.0.31-pre9.
> My serial parameters are:
> 
> /dev/cua1, Line 1, UART: 16550A, Port: 0x02f8, IRQ: 3
>         Baud_base: 57600, close_delay: 50, divisor: 0
>         Flags: spd_hi skip_test
> 
> I have a "USRobotics Sportster V.34+ FAX" and I'm using the following init
> strings:

Hold it: Don't use /dev/cua1. Use /dev/ttyS1: Linux is getting away
from the old split device tricks, and you may have another process (such as
UUCP) accessing the same modem over /dev/ttyS1 and not seeing the lock files
on /dev/cua1.

No guarantees, just an idea.

			Nico Garcia
			Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNCVrRz/+ItycgIJRAQERyQP/d/FqjvebiMg94ezFEgfQAJlT/cWh8hia
lPtT3X1Rk4STjo2Zc6D0/cBHV47I+eE0K1/uHH3w5BmiBcseGibqWa9Z2/IIrVOD
LZGDFH/HZuCJ9k2JJ4FhDuDbsQtMwi56CeEdn4M92sN0RH55vUcanWC/0zTSk/6X
sevooOyda0g=
=0izm
-----END PGP SIGNATURE-----