Re: HylaFaxV4.0pl1 on UnixWare 2.XX

[Matthias.Apitz@SOFTCON.de]

william@irs.tatung.com.tw wrote:
    
    	<...logs deleted....>
    
    when i use ModemRate as default(38400), the result is worse.
    i had been tried SVR4 binary from ftp.sgi.com, the result was the same.
    
    According to my testing cases, the more lines to transmit the result is worse.
    the higher ModemRate the worse result. 
    So i suspect that the problem is "tty". the tty is unstable. 
    
    Please give me some suggestion about this problem ?

Normaly on UnixWare /dev/tty00 is the same major/minor as
/dev/tty00s which means software handshake in the driver:

$ ls -l /dev/tty00*
crw-rw-rw-    1 root     root       3,  0 Nov 29  1995 /dev/tty00
crw-rw-rw-    1 root     root       3,  1 Nov 29  1995 /dev/tty00h
crw-rw-rw-    1 root     root       3,  0 Nov 29  1995 /dev/tty00s
$ 

You can't use /dev/tty00 or /dev/tty00s with rtscts flow and reliable
with high speed.

Try using the /dev/tty00h port and use rtscts if the modem
supports it. Hope that helps.

	matthias