|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
5:ERROR?
Hi,
we use hylafax Version 4.0pl1 with ZyXEL U-1496E (V 6.14M) on SGI Indy
Irix 6.2.
we are using rtscts flow control modem is set to Class 2.0
We are not able to send fax to some fax machines. In our log file the
following
line appers:
Be 25 09:59:57.79: [ 8060]: <-- data [112]
Be 25 09:59:59.98: [ 8060]: SENT 18544 bytes of data
Be 25 09:59:59.98: [ 8060]: SEND 1D RTC
Be 25 09:59:59.98: [ 8060]: <-- data [9]
Be 25 10:00:00.64: [ 8060]: SEND end page
Be 25 10:00:00.64: [ 8060]: SEND send EOP (no more pages or documents)
Be 25 10:00:00.64: [ 8060]: <-- data [2]
Be 25 10:00:12.83: [ 8060]: --> [5:ERROR]
Be 25 10:00:12.83: [ 8060]: SEND recv RTN (retrain negative)
Does anybody meet this problem? What 5:ERROR means?
(When I try to send fax to this destination form our *very old* fax
machine, it
work fine...).
Any help will be very appreciated
--
Roman Pavlik e-mail:Roman.Pavlik@www.cz
http://www.cz
SkyNet, s.r.o. TIS Authorized Security Partner
Kabatnikova 5 tel: +420 5 41 24 59 79
602 00 Brno fax: +420 5 41 24 59 82
Czech Republic
LogFacility: daemon
CountryCode: 420
AreaCode: 5
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 1
Bøe 25 09:58:09.90: [ 8060]: SESSION BEGIN 00000259 420541211206
Bøe 25 09:58:09.90: [ 8060]: SEND FAX: JOB 139 DEST +420541211206 COMMID 00000259
Bøe 25 09:58:09.90: [ 8060]: DELAY 2600 ms
Bøe 25 09:58:12.51: [ 8060]: <-- [44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Bøe 25 09:58:12.68: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.68: [ 8060]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Bøe 25 09:58:12.69: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.69: [ 8060]: <-- [14:AT+FCLASS=2.0\r]
Bøe 25 09:58:12.78: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.78: [ 8060]: <-- [9:AT+FLO=2\r]
Bøe 25 09:58:12.79: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.79: [ 8060]: <-- [9:AT+FPP=0\r]
Bøe 25 09:58:12.80: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.80: [ 8060]: <-- [9:AT+FBO=0\r]
Bøe 25 09:58:12.80: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.81: [ 8060]: <-- [10:AT+FCT=30\r]
Bøe 25 09:58:12.81: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.81: [ 8060]: <-- [15:AT+FNR=1,1,1,1\r]
Bøe 25 09:58:12.82: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.82: [ 8060]: <-- [9:AT+FIE=0\r]
Bøe 25 09:58:12.83: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.83: [ 8060]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Bøe 25 09:58:12.84: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.84: [ 8060]: <-- [7:ATM1L3\r]
Bøe 25 09:58:12.85: [ 8060]: --> [2:OK]
Bøe 25 09:58:12.86: [ 8060]: <-- [14:AT+FCLASS=2.0\r]
Bøe 25 09:58:13.04: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.04: [ 8060]: <-- [9:AT+FLO=2\r]
Bøe 25 09:58:13.14: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.14: [ 8060]: <-- [9:AT+FPP=0\r]
Bøe 25 09:58:13.24: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.24: [ 8060]: <-- [9:AT+FBO=0\r]
Bøe 25 09:58:13.34: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.34: [ 8060]: <-- [10:AT+FCT=30\r]
Bøe 25 09:58:13.44: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.44: [ 8060]: <-- [15:AT+FNR=1,1,1,1\r]
Bøe 25 09:58:13.54: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.54: [ 8060]: <-- [9:AT+FIE=0\r]
Bøe 25 09:58:13.64: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.64: [ 8060]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Bøe 25 09:58:13.74: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.74: [ 8060]: <-- [23:AT+FLI="SkyNet,s.r.o."\r]
Bøe 25 09:58:13.84: [ 8060]: --> [2:OK]
Bøe 25 09:58:13.85: [ 8060]: DIAL 41211206
Bøe 25 09:58:13.85: [ 8060]: <-- [13:ATDP41211206\r]
Bøe 25 09:58:42.23: [ 8060]: --> [4:+FCO]
Bøe 25 09:58:42.33: [ 8060]: --> [142:+FNF:00 00 51 00 00 00 A1 0A 4A A2 4A F2 6A 74 CA 2A 4A F2 52 74 22 A2 D2 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 41 06 FF FF 00 00 ]
Bøe 25 09:58:42.33: [ 8060]: REMOTE NSF "00 00 51 00 00 00 A1 0A 4A A2 4A F2 6A 74 CA 2A 4A F2 52 74 22 A2 D2 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 41 06 FF FF 00 00"
Bøe 25 09:58:42.33: [ 8060]: --> [26:+FCI: ]
Bøe 25 09:58:42.33: [ 8060]: REMOTE CSI ""
Bøe 25 09:58:42.33: [ 8060]: --> [20:+FIS:1,3,0,2,0,0,0,3]
Bøe 25 09:58:42.33: [ 8060]: --> [2:OK]
Bøe 25 09:58:42.33: [ 8060]: REMOTE best rate 9600 bit/s
Bøe 25 09:58:42.33: [ 8060]: REMOTE max page width 1728 pixels in 215 mm
Bøe 25 09:58:42.34: [ 8060]: REMOTE max unlimited page length
Bøe 25 09:58:42.34: [ 8060]: REMOTE best vres 7.7 line/mm
Bøe 25 09:58:42.34: [ 8060]: REMOTE best format 1-D MR
Bøe 25 09:58:42.34: [ 8060]: REMOTE best 10 ms/scanline
Bøe 25 09:58:42.34: [ 8060]: USE 9600 bit/s
Bøe 25 09:58:42.34: [ 8060]: USE 10 ms/scanline
Bøe 25 09:58:42.34: [ 8060]: SEND file "docq/doc380.ps;30"
Bøe 25 09:58:42.35: [ 8060]: USE page width 1728 pixels in 215 mm
Bøe 25 09:58:42.35: [ 8060]: USE unlimited page length
Bøe 25 09:58:42.35: [ 8060]: USE 3.85 line/mm
Bøe 25 09:58:42.35: [ 8060]: USE 1-D MR
Bøe 25 09:58:42.35: [ 8060]: <-- [23:AT+FIS=0,3,0,2,0,0,0,3\r]
Bøe 25 09:58:42.46: [ 8060]: --> [2:OK]
Bøe 25 09:58:42.46: [ 8060]: <-- [7:AT+FDT\r]
Bøe 25 09:58:48.39: [ 8060]: --> [20:+FCS:0,3,0,2,0,0,0,3]
Bøe 25 09:58:48.39: [ 8060]: --> [7:CONNECT]
Bøe 25 09:58:48.39: [ 8060]: SEND begin page
Bøe 25 09:58:48.40: [ 8060]: <-- data [1028]
Bøe 25 09:58:48.40: [ 8060]: <-- data [1029]
Bøe 25 09:58:48.40: [ 8060]: <-- data [1029]
Bøe 25 09:58:48.41: [ 8060]: <-- data [1029]
Bøe 25 09:58:48.67: [ 8060]: <-- data [1026]
Bøe 25 09:58:48.94: [ 8060]: <-- data [1031]
Bøe 25 09:58:49.21: [ 8060]: <-- data [1030]
Bøe 25 09:58:49.48: [ 8060]: <-- data [1026]
Bøe 25 09:58:49.75: [ 8060]: <-- data [1027]
Bøe 25 09:58:50.02: [ 8060]: <-- data [1026]
Bøe 25 09:58:50.29: [ 8060]: <-- data [1027]
Bøe 25 09:58:50.56: [ 8060]: <-- data [1027]
Bøe 25 09:58:52.36: [ 8060]: <-- data [1025]
Bøe 25 09:58:53.06: [ 8060]: <-- data [1028]
Bøe 25 09:58:54.28: [ 8060]: <-- data [1025]
Bøe 25 09:58:55.00: [ 8060]: <-- data [1028]
Bøe 25 09:58:56.15: [ 8060]: <-- data [1024]
Bøe 25 09:58:56.86: [ 8060]: <-- data [1024]
Bøe 25 09:58:57.56: [ 8060]: <-- data [112]
Bøe 25 09:58:59.75: [ 8060]: SENT 18544 bytes of data
Bøe 25 09:58:59.75: [ 8060]: SEND 1D RTC
Bøe 25 09:58:59.75: [ 8060]: <-- data [9]
Bøe 25 09:59:00.40: [ 8060]: SEND end page
Bøe 25 09:59:00.41: [ 8060]: SEND send EOP (no more pages or documents)
Bøe 25 09:59:00.41: [ 8060]: <-- data [2]
Bøe 25 09:59:12.60: [ 8060]: --> [5:ERROR]
Bøe 25 09:59:12.60: [ 8060]: SEND recv RTN (retrain negative)
Bøe 25 09:59:12.60: [ 8060]: <-- [7:AT+FDT\r]
Bøe 25 09:59:18.51: [ 8060]: --> [20:+FCS:0,3,0,2,0,0,0,3]
Bøe 25 09:59:18.51: [ 8060]: --> [7:CONNECT]
Bøe 25 09:59:18.51: [ 8060]: SEND begin page
Bøe 25 09:59:18.51: [ 8060]: <-- data [1028]
Bøe 25 09:59:18.52: [ 8060]: <-- data [1029]
Bøe 25 09:59:18.52: [ 8060]: <-- data [1029]
Bøe 25 09:59:18.52: [ 8060]: <-- data [1029]
Bøe 25 09:59:18.79: [ 8060]: <-- data [1026]
Bøe 25 09:59:19.06: [ 8060]: <-- data [1031]
Bøe 25 09:59:19.32: [ 8060]: <-- data [1030]
Bøe 25 09:59:19.59: [ 8060]: <-- data [1026]
Bøe 25 09:59:19.86: [ 8060]: <-- data [1027]
Bøe 25 09:59:20.13: [ 8060]: <-- data [1026]
Bøe 25 09:59:20.40: [ 8060]: <-- data [1027]
Bøe 25 09:59:20.67: [ 8060]: <-- data [1027]
Bøe 25 09:59:22.48: [ 8060]: <-- data [1025]
Bøe 25 09:59:23.18: [ 8060]: <-- data [1028]
Bøe 25 09:59:24.40: [ 8060]: <-- data [1025]
Bøe 25 09:59:25.13: [ 8060]: <-- data [1028]
Bøe 25 09:59:26.27: [ 8060]: <-- data [1024]
Bøe 25 09:59:26.99: [ 8060]: <-- data [1024]
Bøe 25 09:59:27.68: [ 8060]: <-- data [112]
Bøe 25 09:59:29.87: [ 8060]: SENT 18544 bytes of data
Bøe 25 09:59:29.87: [ 8060]: SEND 1D RTC
Bøe 25 09:59:29.87: [ 8060]: <-- data [9]
Bøe 25 09:59:30.52: [ 8060]: SEND end page
Bøe 25 09:59:30.53: [ 8060]: SEND send EOP (no more pages or documents)
Bøe 25 09:59:30.53: [ 8060]: <-- data [2]
Bøe 25 09:59:42.72: [ 8060]: --> [5:ERROR]
Bøe 25 09:59:42.72: [ 8060]: SEND recv RTN (retrain negative)
Bøe 25 09:59:42.72: [ 8060]: <-- [7:AT+FDT\r]
Bøe 25 09:59:48.62: [ 8060]: --> [20:+FCS:0,3,0,2,0,0,0,3]
Bøe 25 09:59:48.62: [ 8060]: --> [7:CONNECT]
Bøe 25 09:59:48.62: [ 8060]: SEND begin page
Bøe 25 09:59:48.62: [ 8060]: <-- data [1028]
Bøe 25 09:59:48.63: [ 8060]: <-- data [1029]
Bøe 25 09:59:48.63: [ 8060]: <-- data [1029]
Bøe 25 09:59:48.63: [ 8060]: <-- data [1029]
Bøe 25 09:59:48.90: [ 8060]: <-- data [1026]
Bøe 25 09:59:49.17: [ 8060]: <-- data [1031]
Bøe 25 09:59:49.44: [ 8060]: <-- data [1030]
Bøe 25 09:59:49.70: [ 8060]: <-- data [1026]
Bøe 25 09:59:49.97: [ 8060]: <-- data [1027]
Bøe 25 09:59:50.24: [ 8060]: <-- data [1026]
Bøe 25 09:59:50.51: [ 8060]: <-- data [1027]
Bøe 25 09:59:50.78: [ 8060]: <-- data [1027]
Bøe 25 09:59:52.59: [ 8060]: <-- data [1025]
Bøe 25 09:59:53.29: [ 8060]: <-- data [1028]
Bøe 25 09:59:54.51: [ 8060]: <-- data [1025]
Bøe 25 09:59:55.24: [ 8060]: <-- data [1028]
Bøe 25 09:59:56.38: [ 8060]: <-- data [1024]
Bøe 25 09:59:57.10: [ 8060]: <-- data [1024]
Bøe 25 09:59:57.79: [ 8060]: <-- data [112]
Bøe 25 09:59:59.98: [ 8060]: SENT 18544 bytes of data
Bøe 25 09:59:59.98: [ 8060]: SEND 1D RTC
Bøe 25 09:59:59.98: [ 8060]: <-- data [9]
Bøe 25 10:00:00.64: [ 8060]: SEND end page
Bøe 25 10:00:00.64: [ 8060]: SEND send EOP (no more pages or documents)
Bøe 25 10:00:00.64: [ 8060]: <-- data [2]
Bøe 25 10:00:12.83: [ 8060]: --> [5:ERROR]
Bøe 25 10:00:12.83: [ 8060]: SEND recv RTN (retrain negative)
Bøe 25 10:00:12.83: [ 8060]: <-- [7:AT+FKS\r]
Bøe 25 10:00:14.26: [ 8060]: --> [7:+FHS:02]
Bøe 25 10:00:14.26: [ 8060]: REMOTE HANGUP: Call aborted, from +FK or <CAN> (code 2)
Bøe 25 10:00:14.26: [ 8060]: --> [5:ERROR]
Bøe 25 10:00:14.26: [ 8060]: MODEM Command error
Bøe 25 10:00:14.26: [ 8060]: <-- [5:ATH0\r]
Bøe 25 10:00:14.62: [ 8060]: --> [10:NO CARRIER]
Bøe 25 10:00:14.62: [ 8060]: MODEM No carrier
Bøe 25 10:00:14.63: [ 8060]: SESSION END
