Re: [hylafax-users] Multi port dialing order

[joea <joea@xxxxxxxxxxxxxxx>]

So, which config file would this go in?  

config or each modem config?

joea

Lee Howard<faxguy@xxxxxxxxxxxxxxxx> Boldly Declared: 5/25/2006 7:22 PM:
> joea wrote:
> 
>>Want to bias (weight) ports on a multi modem system (4 modems) so that, for 
>>Want outgoing FAX, two lines are preferred over the others.
>>
>>See how to do this on the fly using "faxconfig -m ttyf2 ModemPriority nn".
>>
>>Seems this could be done with "ModemPriority" in the config files, but not 
>>Seems seeing where, yet.
>>
>>Or does it stay fixed with the above command, until changed again?
>>
> 
> The modem config files are re-read with such frequency that almost any 
> change made with faxconfig that you wish to be permanent will also need 
> to be changed in the modem config files.  Otherwise I suspect the 
> setting will only apply until the next time the config file is read-in.
> 
> Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*