Re: [hylafax-users] Voice Command

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Roberto Lourenço wrote:

> Is it possible to play a .wav or something like a voice request to the FAX
> receiver?

Yes, with the HylaFAX available on http://hylafax.sourceforge.net.  
You'd use the <play:C> escape as is documented on the hylafax-config 
manpage there:

--------------------------------
The ``<play:C>'' escape can be used to play a raw audio file with a 
voice modem. The files are named etc/playC.raw where ``C'' is any 
character. This feature can be used, for example, to play a brief audio 
message after picking up the line but before answering. A configuration 
example may be:

 ModemRingResponse:  "AT+FCLASS=8;H1\nAT+VSM=131\nAT+VLS=1\nAT+VTX\n<waitfor:CONNECT><play:1><waitfor:OK>AT+VTS=[933,,150]"
 ModemAnswerCmd:     "<delay:100>AT+FCLASS=1;A"
 CallIDPattern:      SHIELDED_DTMF
 CallIDAnswerLength: 4


In this example using an IS-101 voice-compliant modem, a RING indication 
from the modem will cause the modem to be placed in voice mode, set ulaw 
audio compression, and via the connected phone line play back the 
etc/play1.raw audio file, which may say, "After the tone enter a 
four-digit extension, then start the fax." Following the message a tone 
is played.
--------------------------------

Search the archives for other discussions about this feature.

Thanks,

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*