Re: [hylafax-users] Direct Inward Dial based routing with FaxDispatch

[Aaron Stanford <aaron@xxxxxxxxxxx>]

Suraj,

Here's a partial dump of my config.ttySX and FaxDispatch to use as 
templates:

config:

ModemType:              Class2.1
ModemRate:              57600           # for V.34 faxing
ModemNoFlowCmd:         AT&K0
ModemSoftFlowCmd:       AT&K4
ModemHardFlowCmd:       AT&K3

Class2APCmd:            AT+FAP=1,1,1
Class2BUGCmd:           AT+FBU=0        # early firmware is buggy
Class2SendRTC:          yes
Class2UseHex:           yes

# Some firmwares do not report copy quality correction, although it
# is present and cannot be disabled.  Thus modem-based CQ must be used.
Class2CQQueryCmd:       "!(00-02),(00-02)"
Class2CQCmd:            AT+FCQ=1,0

# versions that respond to AT+FFC=? with non-zero data support RTFCC
Class2RTFCC:            yes

# unfortunately, HylaFAX can't currently send or receive in color
# Also, the modem's extended resolution support is buggy
ModemAnswerCmd:         AT+FCC=1,,,,0;A
ModemDialCmd:           AT+FCC=1,,,,0;DT%s

# If your modem supports ECM you may want to do something like this
Class2Cmd:              AT+FCLASS=2.1;+FRY=4

# Or with the MT5634ZBA-DID you'll probably need something like...
ModemReadyCmds: AT*DS1*DD0*DF1*DN3*DP1  # enable DTMF-DID, wink-start, 3 
digits
CallIDPattern:  "DTMF"          # format of AT*DF1
CallIDAnswerLength:     3               # three DTMF-DID digits then ATA

FaxDispatch:

case "$CALLID1" in
906) SENDTO=djohnson@xxxxxxxxxxx; FILETYPE=pdf;;
905) SENDTO=aaron@xxxxxxxxxx; FILETYPE=pdf;;
900) SENDTO=jellinger@xxxxxxxxxxx; FILETYPE=pdf;;
902) SENDTO=areid@xxxxxxxxxxx; FILETYPE=pdf;;
904) SENDTO=bclute@xxxxxxxxxxx; FILETYPE=pdf;;
903) SENDTO=jbuckman@xxxxxxxxxxx; FILETYPE=pdf;;
901) SENDTO=khardy@xxxxxxxxxxx; FILETYPE=pdf;;
esac

Hope this helps,
Aaron

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*