[hylafax-users] Re[2]: Modem hangs when receiving the fax

[Alex Wang <hadyn_whx@xxxxxxxxxxx>]

:D

I try those setting tomorrow and I let you know


Thanks

ALex


On Wed, 26 Apr 2006 19:08:00 -0700
Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:

> Alex Wang wrote:
> 
> >Hi All
> >
> >Well, Lee ask me to upgrade to the newest version...
> >
> >Upgrade to the 4.2.5.
> >
> >It did not fix the problem.
> >  
> >
> 
> Good.  At least now we know that it's most likely not something that 
> we've already fixed.
> 
> >Here is the output in the log file
> >*************************************
> >Apr 26 19:33:25.89: [  491]: RECV received frame number 26
> >Apr 26 19:33:26.04: [  491]: RECV received frame number 27
> >Apr 26 19:33:26.18: [  491]: RECV received frame number 28
> >Apr 26 19:33:26.42: [  491]: RECV received frame number 29
> >Apr 26 19:33:26.42: [  491]: RECV received RCP frame
> >Apr 26 19:33:26.42: [  491]: --> [10:NO CARRIER]     
> >Apr 26 19:33:26.42: [  491]: <-- [9:AT+FRH=3\r]                 
> >Apr 26 19:33:26.96: [  491]: --> [7:CONNECT]
> >Apr 26 19:33:27.71: [  491]: --> [2:OK]              
> >Apr 26 19:33:27.71: [  491]: RECV recv PPS (partial page signal)
> >Apr 26 19:33:27.71: [  491]: RECV recv MPS (more pages, same document)
> >Apr 26 19:33:27.71: [  491]: RECV received 30 frames of block 1 of page 1
> >Apr 26 19:33:27.85: [  491]: RECV: 7599 bytes of data, 2168 total lines
> >Apr 26 19:33:27.86: [  491]: DELAY 70 ms    
> >Apr 26 19:33:27.94: [  491]: <-- [9:AT+FTH=3\r]
> >Apr 26 19:33:28.13: [  491]: --> [7:CONNECT]    
> >Apr 26 19:33:28.13: [  491]: RECV send MCF (message confirmation)
> >Apr 26 19:33:28.14: [  491]: <-- data [3]      
> >Apr 26 19:33:28.14: [  491]: <-- data [2]      
> >Apr 26 19:33:28.14: [  491]: RECV FAX (000000100): from Somewhere, page 1in 0:17, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
> >Apr 26 19:33:29.31: [  491]: --> [2:OK]  
> >Apr 26 19:33:29.31: [  491]: <-- [11:AT+FRM=146\r]
> >Apr 26 19:33:29.93: [  491]: --> [7:CONNECT]
> >Apr 26 20:55:49.47: [  491]: CLOSE /dev/cuaa4    <-------- This line add on reboot
> >
> >
> >Any idea?
> >
> >System: HylaFAX 4.2.5 FreeBSD 5.4
> >
> 
> Now set:
> 
>   TracingMask: 0x10
>   SessionTracing: 0xFFF
> 
> in your modem config file.  Make sure TracingMask comes exactly before 
> SessionTracing.  Then let's see the session log when it fails... it will 
> give us better information.
> 
> By the way, when it hangs do you really need to reboot?  Or can you just 
> killall faxgetty to get it to respawn and recover?
> 
> Thanks,
> 
> Lee.




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*