|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] send international faxes: MODEM Command error, FCS error
Why, no problem with in my country?
Finnaly, you see MODEM Command error, FCS error.
I think the problem isn't area or international number but another
An idea?
mar 29 08:43:08.22: [30375]: SESSION BEGIN 000000022 390495958785
mar 29 08:43:08.22: [30375]: HylaFAX (tm) Version 4.2.5.5
mar 29 08:43:08.22: [30375]: SEND FAX: JOB 6 DEST 00390495958785 COMMID
000000022 DEVICE '/dev/ttySHSF0' FROM 'faxuser <info@xxxxxxxx>' USER fa
xuser
mar 29 08:43:08.22: [30375]: <-- [12:AT+FCLASS=1\r]
mar 29 08:43:08.24: [30375]: --> [2:OK]
mar 29 08:43:08.24: [30375]: DIAL 00390495958785
mar 29 08:43:08.24: [30375]: <-- [19:ATDT00390495958785\r]
mar 29 08:43:32.14: [30375]: --> [7:CONNECT]
mar 29 08:43:33.35: [30375]: --> [2:OK]
mar 29 08:43:33.35: [30375]: REMOTE CSI ""
mar 29 08:43:33.35: [30375]: <-- [9:AT+FRH=3\r]
mar 29 08:43:33.38: [30375]: --> [7:CONNECT]
mar 29 08:43:33.73: [30375]: --> [2:OK]
mar 29 08:43:33.73: [30375]: REMOTE best rate 9600 bit/s
mar 29 08:43:33.73: [30375]: REMOTE max A4 page width (215 mm)
mar 29 08:43:33.73: [30375]: REMOTE max unlimited page length
mar 29 08:43:33.73: [30375]: REMOTE best vres 7.7 line/mm
mar 29 08:43:33.73: [30375]: REMOTE format support: MH
mar 29 08:43:33.74: [30375]: REMOTE best 0 ms/scanline
mar 29 08:43:33.74: [30375]: USE 9600 bit/s
mar 29 08:43:33.74: [30375]: SEND file "docq/doc6.ps;f1"
mar 29 08:43:33.74: [30375]: USE A4 page width (215 mm)
mar 29 08:43:33.74: [30375]: USE unlimited page length
mar 29 08:43:33.74: [30375]: USE 7.7 line/mm
mar 29 08:43:33.74: [30375]: USE 1-D MH
mar 29 08:43:33.74: [30375]: USE 0 ms/scanline
mar 29 08:43:33.74: [30375]: SEND training at v.29 9600 bit/s
mar 29 08:43:33.74: [30375]: <-- [9:AT+FRS=7\r]
mar 29 08:43:33.86: [30375]: --> [2:OK]
mar 29 08:43:33.86: [30375]: <-- [9:AT+FTH=3\r]
mar 29 08:43:34.18: [30375]: --> [7:CONNECT]
mar 29 08:43:34.18: [30375]: <-- data [23]
mar 29 08:43:34.18: [30375]: <-- data [2]
mar 29 08:43:35.75: [30375]: --> [7:CONNECT]
mar 29 08:43:35.75: [30375]: <-- data [6]
mar 29 08:43:35.75: [30375]: <-- data [2]
mar 29 08:43:36.22: [30375]: --> [2:OK]
mar 29 08:43:36.22: [30375]: <-- [9:AT+FTS=7\r]
mar 29 08:43:36.37: [30375]: --> [2:OK]
mar 29 08:43:36.37: [30375]: <-- [10:AT+FTM=96\r]
mar 29 08:43:36.39: [30375]: --> [7:CONNECT]
mar 29 08:43:36.39: [30375]: <-- data [1024]
mar 29 08:43:36.39: [30375]: <-- data [776]
mar 29 08:43:36.39: [30375]: <-- data [2]
mar 29 08:43:38.39: [30375]: --> [2:OK]
mar 29 08:43:38.39: [30375]: <-- [9:AT+FRH=3\r]
mar 29 08:43:39.51: [30375]: --> [7:CONNECT]
mar 29 08:43:40.79: [30375]: --> [2:OK]
mar 29 08:43:40.79: [30375]: TRAINING succeeded
mar 29 08:43:40.79: [30375]: <-- [9:AT+FRS=7\r]
mar 29 08:43:40.94: [30375]: --> [2:OK]
mar 29 08:43:40.94: [30375]: <-- [10:AT+FTM=96\r]
mar 29 08:43:41.26: [30375]: --> [7:CONNECT]
mar 29 08:43:41.26: [30375]: SEND begin page
mar 29 08:43:41.26: [30375]: Reading MMR-compressed image file
mar 29 08:43:41.26: [30375]: <-- data [1030]
mar 29 08:43:41.26: [30375]: <-- data [1030]
mar 29 08:43:41.26: [30375]: <-- data [1028]
mar 29 08:43:41.26: [30375]: <-- data [1025]
mar 29 08:43:41.26: [30375]: <-- data [214]
mar 29 08:43:41.26: [30375]: SENT 4306 bytes of data
mar 29 08:43:41.26: [30375]: SEND 1D RTC
mar 29 08:43:41.26: [30375]: <-- data [29]
mar 29 08:43:41.27: [30375]: <-- data [2]
mar 29 08:43:41.27: [30375]: SEND end page
mar 29 08:43:45.39: [30375]: --> [2:OK]
mar 29 08:43:45.39: [30375]: <-- [9:AT+FTS=9\r]
mar 29 08:43:45.56: [30375]: --> [2:OK]
mar 29 08:43:45.56: [30375]: SEND send EOP (no more pages or documents)
mar 29 08:43:45.56: [30375]: <-- [9:AT+FTH=3\r]
mar 29 08:43:45.58: [30375]: --> [7:CONNECT]
mar 29 08:43:45.58: [30375]: <-- data [3]
mar 29 08:43:45.58: [30375]: <-- data [2]
mar 29 08:43:46.85: [30375]: --> [2:OK]
mar 29 08:43:46.85: [30375]: <-- [9:AT+FRH=3\r]
mar 29 08:43:47.00: [30375]: --> [7:CONNECT]
mar 29 08:43:47.14: [30375]: --> [5:ERROR]
mar 29 08:43:47.14: [30375]: MODEM Command error
mar 29 08:43:47.14: [30375]: FCS error
mar 29 08:43:47.14: [30375]: <-- [9:AT+FRS=7\r]
mar 29 08:43:48.57: [30375]: --> [2:OK]
mar 29 08:43:48.57: [30375]: <-- [9:AT+FTH=3\r]
mar 29 08:43:48.88: [30375]: --> [7:CONNECT]
mar 29 08:43:48.88: [30375]: <-- data [3]
mar 29 08:43:48.88: [30375]: <-- data [2]
mar 29 08:43:50.17: [30375]: --> [2:OK]
mar 29 08:43:50.17: [30375]: SEND send CRP (command repeat)
mar 29 08:43:50.17: [30375]: <-- [9:AT+FRH=3\r]
mar 29 08:43:53.28: [30375]: --> [0:]
mar 29 08:43:53.28: [30375]: MODEM <Empty line>
mar 29 08:43:53.28: [30375]: <-- data [1]
mar 29 08:43:53.48: [30375]: MODEM <Timeout>
mar 29 08:43:53.48: [30375]: SEND send EOP (no more pages or documents)
mar 29 08:43:53.48: [30375]: <-- [9:AT+FTH=3\r]
mar 29 08:43:53.79: [30375]: --> [7:CONNECT]
mar 29 08:43:53.79: [30375]: <-- data [3]
mar 29 08:43:53.79: [30375]: <-- data [2]
mar 29 08:43:55.09: [30375]: --> [2:OK]
mar 29 08:43:55.09: [30375]: <-- [9:AT+FRH=3\r]
mar 29 08:43:55.23: [30375]: --> [7:CONNECT]
mar 29 08:43:55.95: [30375]: --> [2:OK]
mar 29 08:43:55.95: [30375]: SEND recv DCN (disconnect)
mar 29 08:43:55.95: [30375]: Remote fax disconnected prematurely
mar 29 08:43:55.95: [30375]: <-- [9:AT+FTH=3\r]
mar 29 08:43:56.27: [30375]: --> [7:CONNECT]
mar 29 08:43:56.27: [30375]: <-- data [3]
mar 29 08:43:56.27: [30375]: <-- data [2]
mar 29 08:43:57.57: [30375]: --> [2:OK]
mar 29 08:43:57.57: [30375]: <-- [5:ATH0\r]
mar 29 08:43:57.69: [30375]: --> [2:OK]
mar 29 08:43:57.69: [30375]: SESSION END
mar 29 09:04:40.82: [31011]: SESSION BEGIN 000000026 390495958785
mar 29 09:04:40.82: [31011]: HylaFAX (tm) Version 4.2.5.5
mar 29 09:04:40.82: [31011]: SEND FAX: JOB 7 DEST +390495958785 COMMID
000000026 DEVICE '/dev/ttySHSF0' FROM 'faxuser <info@xxxxxxxx>' USER fax
user
mar 29 09:04:40.82: [31011]: <-- [12:AT+FCLASS=1\r]
mar 29 09:04:40.84: [31011]: --> [2:OK]
mar 29 09:04:40.84: [31011]: DIAL 00390495958785
mar 29 09:04:40.84: [31011]: <-- [19:ATDT00390495958785\r]
mar 29 09:05:04.48: [31011]: --> [7:CONNECT]
mar 29 09:05:05.68: [31011]: --> [2:OK]
mar 29 09:05:05.68: [31011]: REMOTE CSI ""
mar 29 09:05:05.68: [31011]: <-- [9:AT+FRH=3\r]
mar 29 09:05:05.70: [31011]: --> [7:CONNECT]
mar 29 09:05:06.08: [31011]: --> [2:OK]
mar 29 09:05:06.08: [31011]: REMOTE best rate 9600 bit/s
mar 29 09:05:06.08: [31011]: REMOTE max A4 page width (215 mm)
mar 29 09:05:06.08: [31011]: REMOTE max unlimited page length
mar 29 09:05:06.08: [31011]: REMOTE best vres 7.7 line/mm
mar 29 09:05:06.08: [31011]: REMOTE format support: MH
mar 29 09:05:06.08: [31011]: REMOTE best 0 ms/scanline
mar 29 09:05:06.08: [31011]: USE 9600 bit/s
mar 29 09:05:06.08: [31011]: SEND file "docq/doc7.ps;31"
mar 29 09:05:06.08: [31011]: USE A4 page width (215 mm)
mar 29 09:05:06.08: [31011]: USE unlimited page length
mar 29 09:05:06.08: [31011]: USE 7.7 line/mm
mar 29 09:05:06.08: [31011]: USE 1-D MH
mar 29 09:05:06.08: [31011]: USE 0 ms/scanline
mar 29 09:05:06.08: [31011]: SEND training at v.29 9600 bit/s
mar 29 09:05:06.08: [31011]: <-- [9:AT+FRS=7\r]
mar 29 09:05:06.21: [31011]: --> [2:OK]
mar 29 09:05:06.21: [31011]: <-- [9:AT+FTH=3\r]
mar 29 09:05:06.53: [31011]: --> [7:CONNECT]
mar 29 09:05:06.53: [31011]: <-- data [23]
mar 29 09:05:06.53: [31011]: <-- data [2]
mar 29 09:05:08.11: [31011]: --> [7:CONNECT]
mar 29 09:05:08.11: [31011]: <-- data [6]
mar 29 09:05:08.11: [31011]: <-- data [2]
mar 29 09:05:08.57: [31011]: --> [2:OK]
mar 29 09:05:08.57: [31011]: <-- [9:AT+FTS=7\r]
mar 29 09:05:08.72: [31011]: --> [2:OK]
mar 29 09:05:08.72: [31011]: <-- [10:AT+FTM=96\r]
mar 29 09:05:08.74: [31011]: --> [7:CONNECT]
mar 29 09:05:08.74: [31011]: <-- data [1024]
mar 29 09:05:08.74: [31011]: <-- data [776]
mar 29 09:05:08.74: [31011]: <-- data [2]
mar 29 09:05:10.75: [31011]: --> [2:OK]
mar 29 09:05:10.75: [31011]: <-- [9:AT+FRH=3\r]
mar 29 09:05:11.85: [31011]: --> [7:CONNECT]
mar 29 09:05:13.13: [31011]: --> [2:OK]
mar 29 09:05:13.13: [31011]: TRAINING succeeded
mar 29 09:05:13.13: [31011]: <-- [9:AT+FRS=7\r]
mar 29 09:05:13.28: [31011]: --> [2:OK]
mar 29 09:05:13.28: [31011]: <-- [9:AT+FTH=3\r]
mar 29 09:05:13.60: [31011]: --> [7:CONNECT]
mar 29 09:05:13.60: [31011]: <-- data [3]
mar 29 09:05:13.60: [31011]: <-- data [2]
mar 29 09:05:14.89: [31011]: --> [2:OK]
mar 29 09:05:14.89: [31011]: <-- [5:ATH0\r]
mar 29 09:05:15.02: [31011]: --> [2:OK]
mar 29 09:05:15.02: [31011]: SESSION END
mar 29 09:07:26.38: [31177]: SESSION BEGIN 000000027 390495958785
mar 29 09:07:26.38: [31177]: HylaFAX (tm) Version 4.2.5.5
mar 29 09:07:26.38: [31177]: SEND FAX: JOB 8 DEST 00390495958785 COMMID
000000027 DEVICE '/dev/ttySHSF0' FROM 'faxuser
<info@xxxxxxxxxxxxxxxxxxxxxxx>' USER fa
xuser
mar 29 09:07:26.38: [31177]: <-- [12:AT+FCLASS=1\r]
mar 29 09:07:26.40: [31177]: --> [2:OK]
mar 29 09:07:26.40: [31177]: DIAL 00390495958785
mar 29 09:07:26.40: [31177]: <-- [19:ATDT00390495958785\r]
mar 29 09:07:50.27: [31177]: --> [7:CONNECT]
mar 29 09:07:51.48: [31177]: --> [2:OK]
mar 29 09:07:51.48: [31177]: REMOTE CSI ""
mar 29 09:07:51.48: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:07:51.51: [31177]: --> [7:CONNECT]
mar 29 09:07:51.86: [31177]: --> [2:OK]
mar 29 09:07:51.86: [31177]: REMOTE best rate 9600 bit/s
mar 29 09:07:51.86: [31177]: REMOTE max A4 page width (215 mm)
mar 29 09:07:51.86: [31177]: REMOTE max unlimited page length
mar 29 09:07:51.86: [31177]: REMOTE best vres 7.7 line/mm
mar 29 09:07:51.86: [31177]: REMOTE format support: MH
mar 29 09:07:51.86: [31177]: REMOTE best 0 ms/scanline
mar 29 09:07:51.86: [31177]: USE 9600 bit/s
mar 29 09:07:51.86: [31177]: SEND file "docq/doc8.ps;31"
mar 29 09:07:51.86: [31177]: USE A4 page width (215 mm)
mar 29 09:07:51.86: [31177]: USE unlimited page length
mar 29 09:07:51.86: [31177]: USE 7.7 line/mm
mar 29 09:07:51.86: [31177]: USE 1-D MH
mar 29 09:07:51.86: [31177]: USE 0 ms/scanline
mar 29 09:07:51.86: [31177]: SEND training at v.29 9600 bit/s
mar 29 09:07:51.86: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:07:51.99: [31177]: --> [2:OK]
mar 29 09:07:51.99: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:07:52.31: [31177]: --> [7:CONNECT]
mar 29 09:07:52.31: [31177]: <-- data [23]
mar 29 09:07:52.31: [31177]: <-- data [2]
mar 29 09:07:53.88: [31177]: --> [7:CONNECT]
mar 29 09:07:53.88: [31177]: <-- data [6]
mar 29 09:07:53.88: [31177]: <-- data [2]
mar 29 09:07:54.35: [31177]: --> [2:OK]
mar 29 09:07:54.35: [31177]: <-- [9:AT+FTS=7\r]
mar 29 09:07:54.50: [31177]: --> [2:OK]
mar 29 09:07:54.50: [31177]: <-- [10:AT+FTM=96\r]
mar 29 09:07:54.52: [31177]: --> [7:CONNECT]
mar 29 09:07:54.52: [31177]: <-- data [1024]
mar 29 09:07:54.52: [31177]: <-- data [776]
mar 29 09:07:54.52: [31177]: <-- data [2]
mar 29 09:07:56.53: [31177]: --> [2:OK]
mar 29 09:07:56.53: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:07:57.64: [31177]: --> [7:CONNECT]
mar 29 09:07:58.92: [31177]: --> [2:OK]
mar 29 09:07:58.92: [31177]: TRAINING succeeded
mar 29 09:07:58.92: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:07:59.07: [31177]: --> [2:OK]
mar 29 09:07:59.07: [31177]: <-- [10:AT+FTM=96\r]
mar 29 09:07:59.39: [31177]: --> [7:CONNECT]
mar 29 09:07:59.39: [31177]: SEND begin page
mar 29 09:07:59.39: [31177]: <-- data [1027]
mar 29 09:07:59.39: [31177]: <-- data [1027]
mar 29 09:07:59.39: [31177]: <-- data [374]
mar 29 09:07:59.39: [31177]: SENT 2422 bytes of data
mar 29 09:07:59.39: [31177]: SEND 1D RTC
mar 29 09:07:59.39: [31177]: <-- data [29]
mar 29 09:07:59.39: [31177]: <-- data [2]
mar 29 09:07:59.39: [31177]: SEND end page
mar 29 09:08:01.95: [31177]: --> [2:OK]
mar 29 09:08:01.95: [31177]: <-- [9:AT+FTS=9\r]
mar 29 09:08:02.12: [31177]: --> [2:OK]
mar 29 09:08:02.12: [31177]: SEND send EOP (no more pages or documents)
mar 29 09:08:02.12: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:02.14: [31177]: --> [7:CONNECT]
mar 29 09:08:02.14: [31177]: <-- data [3]
mar 29 09:08:02.14: [31177]: <-- data [2]
mar 29 09:08:03.41: [31177]: --> [2:OK]
mar 29 09:08:03.41: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:03.56: [31177]: --> [7:CONNECT]
mar 29 09:08:03.70: [31177]: --> [5:ERROR]
mar 29 09:08:03.70: [31177]: MODEM Command error
mar 29 09:08:03.70: [31177]: FCS error
mar 29 09:08:03.70: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:05.14: [31177]: --> [2:OK]
mar 29 09:08:05.14: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:05.46: [31177]: --> [7:CONNECT]
mar 29 09:08:05.46: [31177]: <-- data [3]
mar 29 09:08:05.46: [31177]: <-- data [2]
mar 29 09:08:06.75: [31177]: --> [2:OK]
mar 29 09:08:06.75: [31177]: SEND send CRP (command repeat)
mar 29 09:08:06.75: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:06.90: [31177]: --> [7:CONNECT]
mar 29 09:08:07.02: [31177]: --> [5:ERROR]
mar 29 09:08:07.02: [31177]: MODEM Command error
mar 29 09:08:07.02: [31177]: FCS error
mar 29 09:08:07.02: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:07.17: [31177]: --> [2:OK]
mar 29 09:08:07.17: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:07.49: [31177]: --> [7:CONNECT]
mar 29 09:08:07.49: [31177]: <-- data [3]
mar 29 09:08:07.49: [31177]: <-- data [2]
mar 29 09:08:08.78: [31177]: --> [2:OK]
mar 29 09:08:08.78: [31177]: SEND send CRP (command repeat)
mar 29 09:08:08.78: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:08.93: [31177]: --> [7:CONNECT]
mar 29 09:08:09.06: [31177]: --> [5:ERROR]
mar 29 09:08:09.06: [31177]: MODEM Command error
mar 29 09:08:09.06: [31177]: FCS error
mar 29 09:08:09.06: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:09.20: [31177]: --> [2:OK]
mar 29 09:08:09.20: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:09.52: [31177]: --> [7:CONNECT]
mar 29 09:08:09.52: [31177]: <-- data [3]
mar 29 09:08:09.52: [31177]: <-- data [2]
mar 29 09:08:10.81: [31177]: --> [2:OK]
mar 29 09:08:10.81: [31177]: SEND send CRP (command repeat)
mar 29 09:08:10.81: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:10.96: [31177]: --> [7:CONNECT]
mar 29 09:08:11.09: [31177]: --> [5:ERROR]
mar 29 09:08:11.09: [31177]: MODEM Command error
mar 29 09:08:11.09: [31177]: FCS error
mar 29 09:08:11.09: [31177]: SEND send EOP (no more pages or documents)
mar 29 09:08:11.09: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:12.89: [31177]: --> [7:CONNECT]
mar 29 09:08:12.89: [31177]: <-- data [3]
mar 29 09:08:12.89: [31177]: <-- data [2]
mar 29 09:08:14.18: [31177]: --> [2:OK]
mar 29 09:08:14.18: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:14.33: [31177]: --> [7:CONNECT]
mar 29 09:08:14.51: [31177]: --> [5:ERROR]
mar 29 09:08:14.51: [31177]: MODEM Command error
mar 29 09:08:14.51: [31177]: FCS error
mar 29 09:08:14.51: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:14.66: [31177]: --> [2:OK]
mar 29 09:08:14.66: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:14.98: [31177]: --> [7:CONNECT]
mar 29 09:08:14.98: [31177]: <-- data [3]
mar 29 09:08:14.98: [31177]: <-- data [2]
mar 29 09:08:16.27: [31177]: --> [2:OK]
mar 29 09:08:16.27: [31177]: SEND send CRP (command repeat)
mar 29 09:08:16.27: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:16.42: [31177]: --> [7:CONNECT]
mar 29 09:08:16.60: [31177]: --> [5:ERROR]
mar 29 09:08:16.60: [31177]: MODEM Command error
mar 29 09:08:16.60: [31177]: FCS error
mar 29 09:08:16.60: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:16.75: [31177]: --> [2:OK]
mar 29 09:08:16.75: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:17.07: [31177]: --> [7:CONNECT]
mar 29 09:08:17.07: [31177]: <-- data [3]
mar 29 09:08:17.07: [31177]: <-- data [2]
mar 29 09:08:18.36: [31177]: --> [2:OK]
mar 29 09:08:18.36: [31177]: SEND send CRP (command repeat)
mar 29 09:08:18.36: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:18.51: [31177]: --> [7:CONNECT]
mar 29 09:08:18.69: [31177]: --> [5:ERROR]
mar 29 09:08:18.69: [31177]: MODEM Command error
mar 29 09:08:18.69: [31177]: FCS error
mar 29 09:08:18.69: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:18.84: [31177]: --> [2:OK]
mar 29 09:08:18.84: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:19.15: [31177]: --> [7:CONNECT]
mar 29 09:08:19.15: [31177]: <-- data [3]
mar 29 09:08:19.15: [31177]: <-- data [2]
mar 29 09:08:20.45: [31177]: --> [2:OK]
mar 29 09:08:20.45: [31177]: SEND send CRP (command repeat)
mar 29 09:08:20.45: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:20.59: [31177]: --> [7:CONNECT]
mar 29 09:08:20.78: [31177]: --> [5:ERROR]
mar 29 09:08:20.78: [31177]: MODEM Command error
mar 29 09:08:20.78: [31177]: FCS error
mar 29 09:08:20.78: [31177]: SEND send EOP (no more pages or documents)
mar 29 09:08:20.78: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:21.12: [31177]: --> [7:CONNECT]
mar 29 09:08:21.12: [31177]: <-- data [3]
mar 29 09:08:21.12: [31177]: <-- data [2]
mar 29 09:08:22.41: [31177]: --> [2:OK]
mar 29 09:08:22.41: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:22.55: [31177]: --> [7:CONNECT]
mar 29 09:08:22.74: [31177]: --> [5:ERROR]
mar 29 09:08:22.74: [31177]: MODEM Command error
mar 29 09:08:22.74: [31177]: FCS error
mar 29 09:08:22.74: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:22.89: [31177]: --> [2:OK]
mar 29 09:08:22.89: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:23.20: [31177]: --> [7:CONNECT]
mar 29 09:08:23.20: [31177]: <-- data [3]
mar 29 09:08:23.20: [31177]: <-- data [2]
mar 29 09:08:24.49: [31177]: --> [2:OK]
mar 29 09:08:24.49: [31177]: SEND send CRP (command repeat)
mar 29 09:08:24.49: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:24.64: [31177]: --> [7:CONNECT]
mar 29 09:08:24.83: [31177]: --> [5:ERROR]
mar 29 09:08:24.83: [31177]: MODEM Command error
mar 29 09:08:24.83: [31177]: FCS error
mar 29 09:08:24.83: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:24.97: [31177]: --> [2:OK]
mar 29 09:08:24.97: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:25.29: [31177]: --> [7:CONNECT]
mar 29 09:08:25.29: [31177]: <-- data [3]
mar 29 09:08:25.29: [31177]: <-- data [2]
mar 29 09:08:26.58: [31177]: --> [2:OK]
mar 29 09:08:26.58: [31177]: SEND send CRP (command repeat)
mar 29 09:08:26.58: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:26.73: [31177]: --> [7:CONNECT]
mar 29 09:08:26.91: [31177]: --> [5:ERROR]
mar 29 09:08:26.92: [31177]: MODEM Command error
mar 29 09:08:26.92: [31177]: FCS error
mar 29 09:08:26.92: [31177]: <-- [9:AT+FRS=7\r]
mar 29 09:08:27.06: [31177]: --> [2:OK]
mar 29 09:08:27.06: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:27.38: [31177]: --> [7:CONNECT]
mar 29 09:08:27.38: [31177]: <-- data [3]
mar 29 09:08:27.38: [31177]: <-- data [2]
mar 29 09:08:28.67: [31177]: --> [2:OK]
mar 29 09:08:28.67: [31177]: SEND send CRP (command repeat)
mar 29 09:08:28.67: [31177]: <-- [9:AT+FRH=3\r]
mar 29 09:08:28.82: [31177]: --> [7:CONNECT]
mar 29 09:08:29.00: [31177]: --> [5:ERROR]
mar 29 09:08:29.00: [31177]: MODEM Command error
mar 29 09:08:29.00: [31177]: FCS error
mar 29 09:08:29.00: [31177]: No response to EOP repeated 3 tries
mar 29 09:08:29.00: [31177]: <-- [9:AT+FTH=3\r]
mar 29 09:08:29.34: [31177]: --> [7:CONNECT]
mar 29 09:08:29.34: [31177]: <-- data [3]
mar 29 09:08:29.34: [31177]: <-- data [2]
mar 29 09:08:30.63: [31177]: --> [2:OK]
mar 29 09:08:30.63: [31177]: <-- [5:ATH0\r]
mar 29 09:08:30.76: [31177]: --> [2:OK]
mar 29 09:08:30.76: [31177]: SESSION END
-----Message d'origine-----
De : hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] De la part de Lee Howard
Envoyé : mercredi 29 mars 2006 23:07
À : 2js@xxxxxxxxxx
Cc : hylafax-users@xxxxxxxxxxx
Objet : Re: [hylafax-users] send international faxes
2js@xxxxxxxxxx wrote:
> I have hylafax 4.2.5.5 on centos 4.2 with hsfmodem my configuration
> work perfectly in my country 33 [france].
> But i have some problems with international.
>
> i have always errors => send retry (some time the fax arrive at
> destination but error and retry).
Can you show us the session log (/var/spool/hylafax/log) ?
> country 33
> area 4
> Faxnumber +33491001122
> long distance 0
> international 00
> DialStringRules: etc/dialrules
>
> i send a fax with a number = 0491111111, it 's ok but with
> 0033491111111 it's no good, why?
I don't know, dialrules problem?
> witch the difference between dialrules and dialrules.europe?
dialrules.europe is an example only. dialrules is what you actually are
using.
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
