[hylafax-users] Questions

[Tom Miller <tom@xxxxxxxxxxxxxx>]

I won't if anyone know the answer to this question.

If the source fax is 408-444-5555
The destination is a "share pool of fax modem".

If the fax being send to 321-111-3333 then 
the 321-111-3333 automaticly forward to the 
final destination the "share pool of fax modem".

Question? What will show up as a source telephone number 
when Hylafax receive it?   is it 
408-444-5555 or 321-111-3333?

"share pool of fax modem" is a huntgroup of many fax number.


Also, is there a recommended modem that support T.38?

Thanks much,

Tom


---- Original message ----
>Date: Thu, 23 Feb 2006 16:17:52 +0100
>From: Michele Petrazzo <michele.petrazzo@xxxxxxxxx>  
>Subject: [hylafax-users] Unknown problem (check modem 
power)  
>To: Hylafax Mailling List <hylafax-users@xxxxxxxxxxx>
>
>Hi list,
>I have an hylafax server with a USRobotics Sportster Message 
Plus, with
>the "default" configuration created with faxaddmodem. 
Sometime, when
>send a fax, I receive an error that say	Unknown 
problem (check modem
>power), but the modem have power, of course.
>Is there a method for understand why?
>Only other question: here (into the log) I see that the 
server wait
>three minutes for the modem reply (12:36 -> 12:39). Is this 
possible?
>
>Thanks,
>Michele
>
>This is the log:
>
>Feb 22 12:36:12.20: [14491]: SESSION BEGIN 000005581 
141500432931511
>Feb 22 12:36:12.20: [14491]: HylaFAX (tm) Version 4.2.2
>Feb 22 12:36:12.20: [14491]: SEND FAX: JOB 9267 DEST 
0,0432XXXX COMMID
>000005581 DEVICE '/dev/ttyS0'
>Feb 22 12:36:12.20: [14491]: <-- [12:AT+FCLASS=1\r]
>Feb 22 12:36:12.34: [14491]: --> [2:OK]
>Feb 22 12:36:12.34: [14491]: DIAL 0,0432XXXX
>Feb 22 12:36:12.34: [14491]: <-- [20:ATX3DT0,0432XXXX@\r]
>Feb 22 12:39:12.34: [14491]: SEND FAILED: JOB 9267 DEST 
0,0432XXXX ERR
>Unknown problem (check modem power)
>Feb 22 12:39:12.34: [14491]: SEND FAILED: JOB 9267 DEST 
0,0432XXXX ERR
>Unknown problem (check modem power); too many attempts to 
dial
>Feb 22 12:39:12.34: [14491]: <-- [5:ATH0\r]
>Feb 22 12:39:12.47: [14491]: --> [4:ATH0]
>Feb 22 12:39:12.47: [14491]: --> [2:OK]
>Feb 22 12:39:12.47: [14491]: SESSION END
>
>
>Modem config:
>
>ModemType:              Class1
>ModemRate:              19200
>ModemFlowControl:       xonxoff
>ModemSetupDTRCmd:       ATS13=1&D2
>ModemSetupDCDCmd:       AT&C1
>ModemNoFlowCmd:         AT&H0&I0&R1
>ModemHardFlowCmd:       AT&H1&I0&R2
>ModemSoftFlowCmd:       AT&H2&I2&R1
>ModemResultCodesCmd:    ATQ0X3
>ModemMfrQueryCmd:       !USR
>ModemModelQueryCmd:     ATI3
>ModemRevQueryCmd:       ATI7
>Class1NFLOCmd:          AT&H0&I0&R1
>Class1HFLOCmd:          AT&H1&I0&R2
>Class1ResponseWaitCmd:  AT+FRS=1
>ModemSetupAACmd:        AT+FCLASS=0
>ModemAnswerCmd:         AT+FCLASS=1A
>Class2NRCmd:    AT+FNR=1,1,1,0
>ModemDialCmd:   ATX3DT%s@
>
>____________________ HylaFAX(tm) Users Mailing List 
_______________________
>  To subscribe/unsubscribe, click 
http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-
request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail 
sales@xxxxxxxxx*
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*