|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] receiving on an external usr courier ?
Feb 17 10:09:11.98: [16246]: --> [5:ERROR]
Feb 17 10:09:11.98: [16246]: MODEM Command error
Try other modem.
On Fri, 17 Feb 2006 16:49:20 +0000
Franck Horlaville <fh.lists@xxxxxxxxxxxx> wrote:
> Hi list !
>
> I've looked all over the place and don't get why I'm not receiving
> faxes.
>
> Phone rings, modem picks up, negociates, then the speaker shuts and a
> second or two later it hangs up.
>
> I tried Class 2.0 rtscts, class 1 xonxoff and class 1 rtscts -
> default probed config files (from faxaddmodem)
> Below is the rtscts class 1 version of the config file
>
> RedHat linux 7.3, hylafax 4.2.5
>
> Thanks a bunch !!
>
> ===
> $sudo tail /var/log/messages:
> Feb 17 13:48:42 laura FaxGetty[17291]: MODEM USR USRobotics Courier
> V.Everything/USRobotics Courier V.Everything Configuration Profile...
> Product type France External Options
> HST,V32bis,Terbo,VFC,V34+,x2 Fax Options Class 1,Class 2.0
> Clock Freq 20.16Mhz Flash ROM 512k
> Ram 64k Supervisor date 04/23/97 DSP
> date 04/21/97 Supervisor rev 033-7.1.8 DSP
> rev 2.2.5 Serial Number 21NDDAV7ZFZE
>
> Feb 17 13:48:48 laura FaxGetty[17291]: ANSWER: FAX CONNECTION DEVICE
> '/dev/ttyS0'
>
> Feb 17 13:49:48 laura FaxGetty[17291]: MODEM USR USRobotics Courier
> V.Everything/USRobotics Courier V.Everything Configuration Profile...
> Product type France External Options
> HST,V32bis,Terbo,VFC,V34+,x2 Fax Options Class 1,Class 2.0
> Clock Freq 20.16Mhz Flash ROM 512k
> Ram 64k Supervisor date 04/23/97 DSP
> date 04/21/97 Supervisor rev 033-7.1.8 DSP
> rev 2.2.5 Serial Number 21NDDAV7ZFZE
>
> ===
>
> $ ps wax | grep fax
> 22769 ? S 0:00 /usr/local/sbin/faxq
> 22771 ? S 0:00 /usr/local/sbin/hfaxd -i hylafax
> 17291 ? S 0:00 /usr/local/sbin/faxgetty ttyS0
> 20982 pts/2 R 0:00 grep fax
>
> ===
>
> $ sudo cat log/c000000015
> Password:
> Feb 17 10:08:47.59: [16246]: SESSION BEGIN 000000015 21222248786
> Feb 17 10:08:47.59: [16246]: HylaFAX (tm) Version 4.2.5
> Feb 17 10:08:47.59: [16246]: <-- [13:AT+FCLASS=1A\r]
> Feb 17 10:08:52.86: [16246]: --> [7:CONNECT]
> Feb 17 10:08:52.86: [16246]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
> Feb 17 10:08:52.86: [16246]: RECV FAX: begin
> Feb 17 10:08:52.86: [16246]: <-- data [32]
> Feb 17 10:08:52.86: [16246]: <-- data [2]
> Feb 17 10:08:54.84: [16246]: --> [7:CONNECT]
> Feb 17 10:08:54.84: [16246]: <-- data [23]
> Feb 17 10:08:54.84: [16246]: <-- data [2]
> Feb 17 10:08:56.00: [16246]: --> [7:CONNECT]
> Feb 17 10:08:56.00: [16246]: <-- data [13]
> Feb 17 10:08:56.00: [16246]: <-- data [2]
> Feb 17 10:08:56.90: [16246]: --> [2:OK]
> Feb 17 10:08:56.90: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:08:58.03: [16246]: --> [7:CONNECT]
> Feb 17 10:08:58.67: [16246]: --> [5:ERROR]
> Feb 17 10:08:58.67: [16246]: MODEM Command error
> Feb 17 10:08:58.67: [16246]: FCS error
> Feb 17 10:08:58.67: [16246]: DELAY 70 ms
> Feb 17 10:08:58.74: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:08:58.85: [16246]: --> [7:CONNECT]
> Feb 17 10:08:58.86: [16246]: <-- data [3]
> Feb 17 10:08:58.86: [16246]: <-- data [2]
> Feb 17 10:09:00.07: [16246]: --> [2:OK]
> Feb 17 10:09:00.07: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:00.07: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:02.60: [16246]: --> [7:CONNECT]
> Feb 17 10:09:02.75: [16246]: --> [5:ERROR]
> Feb 17 10:09:02.75: [16246]: MODEM Command error
> Feb 17 10:09:02.75: [16246]: FCS error
> Feb 17 10:09:02.75: [16246]: DELAY 70 ms
> Feb 17 10:09:02.82: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:02.93: [16246]: --> [7:CONNECT]
> Feb 17 10:09:02.93: [16246]: <-- data [3]
> Feb 17 10:09:02.93: [16246]: <-- data [2]
> Feb 17 10:09:04.14: [16246]: --> [2:OK]
> Feb 17 10:09:04.14: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:04.14: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:07.46: [16246]: --> [7:CONNECT]
> Feb 17 10:09:08.09: [16246]: --> [5:ERROR]
> Feb 17 10:09:08.09: [16246]: MODEM Command error
> Feb 17 10:09:08.09: [16246]: FCS error
> Feb 17 10:09:08.09: [16246]: DELAY 70 ms
> Feb 17 10:09:08.16: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:08.27: [16246]: --> [7:CONNECT]
> Feb 17 10:09:08.27: [16246]: <-- data [3]
> Feb 17 10:09:08.27: [16246]: <-- data [2]
> Feb 17 10:09:09.48: [16246]: --> [2:OK]
> Feb 17 10:09:09.48: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:09.48: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:11.95: [16246]: --> [7:CONNECT]
> Feb 17 10:09:11.98: [16246]: --> [5:ERROR]
> Feb 17 10:09:11.98: [16246]: MODEM Command error
> Feb 17 10:09:11.98: [16246]: FCS error
> Feb 17 10:09:11.98: [16246]: DELAY 1500 ms
> Feb 17 10:09:13.48: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:13.59: [16246]: --> [7:CONNECT]
> Feb 17 10:09:13.59: [16246]: <-- data [32]
> Feb 17 10:09:13.59: [16246]: <-- data [2]
> Feb 17 10:09:15.57: [16246]: --> [7:CONNECT]
> Feb 17 10:09:15.57: [16246]: <-- data [23]
> Feb 17 10:09:15.57: [16246]: <-- data [2]
> Feb 17 10:09:16.73: [16246]: --> [7:CONNECT]
> Feb 17 10:09:16.73: [16246]: <-- data [13]
> Feb 17 10:09:16.73: [16246]: <-- data [2]
> Feb 17 10:09:17.62: [16246]: --> [2:OK]
> Feb 17 10:09:17.62: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:18.77: [16246]: --> [7:CONNECT]
> Feb 17 10:09:19.40: [16246]: --> [5:ERROR]
> Feb 17 10:09:19.40: [16246]: MODEM Command error
> Feb 17 10:09:19.40: [16246]: FCS error
> Feb 17 10:09:19.40: [16246]: DELAY 70 ms
> Feb 17 10:09:19.47: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:19.58: [16246]: --> [7:CONNECT]
> Feb 17 10:09:19.58: [16246]: <-- data [3]
> Feb 17 10:09:19.58: [16246]: <-- data [2]
> Feb 17 10:09:20.79: [16246]: --> [2:OK]
> Feb 17 10:09:20.79: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:20.79: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:23.34: [16246]: --> [7:CONNECT]
> Feb 17 10:09:23.50: [16246]: --> [5:ERROR]
> Feb 17 10:09:23.50: [16246]: MODEM Command error
> Feb 17 10:09:23.50: [16246]: FCS error
> Feb 17 10:09:23.50: [16246]: DELAY 70 ms
> Feb 17 10:09:23.57: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:23.68: [16246]: --> [7:CONNECT]
> Feb 17 10:09:23.68: [16246]: <-- data [3]
> Feb 17 10:09:23.68: [16246]: <-- data [2]
> Feb 17 10:09:24.89: [16246]: --> [2:OK]
> Feb 17 10:09:24.89: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:24.89: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:28.29: [16246]: --> [7:CONNECT]
> Feb 17 10:09:28.31: [16246]: --> [5:ERROR]
> Feb 17 10:09:28.31: [16246]: MODEM Command error
> Feb 17 10:09:28.31: [16246]: FCS error
> Feb 17 10:09:28.31: [16246]: DELAY 70 ms
> Feb 17 10:09:28.38: [16246]: <-- [9:AT+FTH=3\r]
> Feb 17 10:09:28.49: [16246]: --> [7:CONNECT]
> Feb 17 10:09:28.49: [16246]: <-- data [3]
> Feb 17 10:09:28.49: [16246]: <-- data [2]
> Feb 17 10:09:29.70: [16246]: --> [2:OK]
> Feb 17 10:09:29.70: [16246]: RECV send CRP (command repeat)
> Feb 17 10:09:29.70: [16246]: <-- [9:AT+FRH=3\r]
> Feb 17 10:09:36.70: [16246]: --> [0:]
> Feb 17 10:09:36.70: [16246]: MODEM <Empty line>
> Feb 17 10:09:36.70: [16246]: <-- data [1]
> Feb 17 10:09:36.71: [16246]: --> [2:OK]
> Feb 17 10:09:36.71: [16246]: RECV FAX: No answer (T.30 T1 timeout)
> Feb 17 10:09:36.71: [16246]: RECV FAX: end
> Feb 17 10:09:36.71: [16246]: SESSION END
>
> ===
>
> [fh@laura hylafax]$ cat etc/config.ttyS0
> # $Id: usr-rts,v 1.7 2004/05/19 21:17:23 lhoward Exp $
> #
> # HylaFAX Facsimile Software
> #
> # Copyright (c) 1990-1996 Sam Leffler
> # Copyright (c) 1991-1996 Silicon Graphics, Inc.
> # HylaFAX is a trademark of Silicon Graphics, Inc.
> #(...)
> # OF THIS SOFTWARE.
> #
>
> #
> # Configuration for using the Class 1 command interface with
> # a USR Courier or Sportster modem and RTS/CTS flow control.
> #
> #
> CountryCode: 212
> AreaCode: 22
> FAXNumber: "+212 22 24 87 86"
> LongDistancePrefix: 0
> InternationalPrefix: 00
> DialStringRules: etc/dialrules
> ServerTracing: 1
> SessionTracing: 11
> RecvFileMode: 0600
> LogFileMode: 0600
> DeviceMode: 0600
> RingsBeforeAnswer: 1
> SpeakerVolume: high
> GettyArgs: "-h %l dx_%s"
> LocalIdentifier: "HP Service Center"
> TagLineFont: etc/lutRS18.pcf
> TagLineFormat: "From %%l|%c|Page %%P of %%T"
> MaxRecvPages: 25
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType: Class1 # use class 1 interface
> ModemRate: 19200 # rate for DCE-DTE communication
> ModemFlowControl: rtscts # hardware flow control
> #
> ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem
> ModemSetupDCDCmd: AT&C1 # setup so DCD reflects
> carrier (or not)
> ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow
> control
> ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware
> flow control
> ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software
> flow control
> ModemResultCodesCmd: ATQ0X4 # enable result codes
> #
> ModemMfrQueryCmd: !USR
> ModemModelQueryCmd: ATI3
> ModemRevQueryCmd: ATI7 # XXX, returns a multi-line
> result
> #
> # When AT+FCLASS=1 is issued the modem automatically switches
> # to software flow control; these parameters let the fax software
> # reset flow control as needed after entering Class 1.
> #
> Class1NFLOCmd: AT&H0&I0&R1 # setup modem for no flow
> control
> Class1HFLOCmd: AT&H1&I0&R2 # setup modem for hardware
> flow control
> Class1SFLOCmd: "" # modem does this automatically
> #
> # The remainder of this configuration is included so that the
> # modem "idles" in Class 0 while not sending or receiving facsimile.
> #
> ModemSetupAACmd: AT+FCLASS=0&H1&I0&R2 # leave modem in class 0
> ModemAnswerCmd: AT+FCLASS=1&H1&I0&R2A # force RTS/CTS after
> change
> #
> # Disables the reporting of bad frames by the modem. This
> # overcomes a firmware problem in the x2 and V90 Sportsters.
> # It is not necessary for the Courier modem.
> #
> Class2NRCmd: AT+FNR=1,1,1,0
>
>
>
> Thanks again
>
>
> Franck Horlaville
> IT Manager
> Qualitech
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
> To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
