[hylafax-users] receiving on an external usr courier ?

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] receiving on an external usr courier ?
From: Franck Horlaville <fh.lists@xxxxxxxxxxxx>
Date: Fri, 17 Feb 2006 16:49:20 +0000

Hi list !

I've looked all over the place and don't get why I'm not receiving faxes.

Phone rings, modem picks up, negociates, then the speaker shuts and a second or two later it hangs up.

I tried Class 2.0 rtscts, class 1 xonxoff and class 1 rtscts - default probed config files (from faxaddmodem) Below is the rtscts class 1 version of the config file

RedHat linux 7.3, hylafax 4.2.5

Thanks a bunch !!

=== $sudo tail /var/log/messages: Feb 17 13:48:42 laura FaxGetty[17291]: MODEM USR USRobotics Courier V.Everything/USRobotics Courier V.Everything Configuration Profile... Product type France External Options HST,V32bis,Terbo,VFC,V34+,x2 Fax Options Class 1,Class 2.0 Clock Freq 20.16Mhz Flash ROM 512k Ram 64k Supervisor date 04/23/97 DSP date 04/21/97 Supervisor rev 033-7.1.8 DSP rev 2.2.5 Serial Number 21NDDAV7ZFZE

Feb 17 13:48:48 laura FaxGetty[17291]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'

Feb 17 13:49:48 laura FaxGetty[17291]: MODEM USR USRobotics Courier V.Everything/USRobotics Courier V.Everything Configuration Profile... Product type France External Options HST,V32bis,Terbo,VFC,V34+,x2 Fax Options Class 1,Class 2.0 Clock Freq 20.16Mhz Flash ROM 512k Ram 64k Supervisor date 04/23/97 DSP date 04/21/97 Supervisor rev 033-7.1.8 DSP rev 2.2.5 Serial Number 21NDDAV7ZFZE

===

$ ps wax | grep fax
22769 ?        S      0:00 /usr/local/sbin/faxq
22771 ?        S      0:00 /usr/local/sbin/hfaxd -i hylafax
17291 ?        S      0:00 /usr/local/sbin/faxgetty ttyS0
20982 pts/2    R      0:00 grep fax

===

$ sudo cat log/c000000015
Password:
Feb 17 10:08:47.59: [16246]: SESSION BEGIN 000000015 21222248786
Feb 17 10:08:47.59: [16246]: HylaFAX (tm) Version 4.2.5
Feb 17 10:08:47.59: [16246]: <-- [13:AT+FCLASS=1A\r]
Feb 17 10:08:52.86: [16246]: --> [7:CONNECT]
Feb 17 10:08:52.86: [16246]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Feb 17 10:08:52.86: [16246]: RECV FAX: begin
Feb 17 10:08:52.86: [16246]: <-- data [32]
Feb 17 10:08:52.86: [16246]: <-- data [2]
Feb 17 10:08:54.84: [16246]: --> [7:CONNECT]
Feb 17 10:08:54.84: [16246]: <-- data [23]
Feb 17 10:08:54.84: [16246]: <-- data [2]
Feb 17 10:08:56.00: [16246]: --> [7:CONNECT]
Feb 17 10:08:56.00: [16246]: <-- data [13]
Feb 17 10:08:56.00: [16246]: <-- data [2]
Feb 17 10:08:56.90: [16246]: --> [2:OK]
Feb 17 10:08:56.90: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:08:58.03: [16246]: --> [7:CONNECT]
Feb 17 10:08:58.67: [16246]: --> [5:ERROR]
Feb 17 10:08:58.67: [16246]: MODEM Command error
Feb 17 10:08:58.67: [16246]: FCS error
Feb 17 10:08:58.67: [16246]: DELAY 70 ms
Feb 17 10:08:58.74: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:08:58.85: [16246]: --> [7:CONNECT]
Feb 17 10:08:58.86: [16246]: <-- data [3]
Feb 17 10:08:58.86: [16246]: <-- data [2]
Feb 17 10:09:00.07: [16246]: --> [2:OK]
Feb 17 10:09:00.07: [16246]: RECV send CRP (command repeat)
Feb 17 10:09:00.07: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:02.60: [16246]: --> [7:CONNECT]
Feb 17 10:09:02.75: [16246]: --> [5:ERROR]
Feb 17 10:09:02.75: [16246]: MODEM Command error
Feb 17 10:09:02.75: [16246]: FCS error
Feb 17 10:09:02.75: [16246]: DELAY 70 ms
Feb 17 10:09:02.82: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:09:02.93: [16246]: --> [7:CONNECT]
Feb 17 10:09:02.93: [16246]: <-- data [3]
Feb 17 10:09:02.93: [16246]: <-- data [2]
Feb 17 10:09:04.14: [16246]: --> [2:OK]
Feb 17 10:09:04.14: [16246]: RECV send CRP (command repeat)
Feb 17 10:09:04.14: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:07.46: [16246]: --> [7:CONNECT]
Feb 17 10:09:08.09: [16246]: --> [5:ERROR]
Feb 17 10:09:08.09: [16246]: MODEM Command error
Feb 17 10:09:08.09: [16246]: FCS error
Feb 17 10:09:08.09: [16246]: DELAY 70 ms
Feb 17 10:09:08.16: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:09:08.27: [16246]: --> [7:CONNECT]
Feb 17 10:09:08.27: [16246]: <-- data [3]
Feb 17 10:09:08.27: [16246]: <-- data [2]
Feb 17 10:09:09.48: [16246]: --> [2:OK]
Feb 17 10:09:09.48: [16246]: RECV send CRP (command repeat)
Feb 17 10:09:09.48: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:11.95: [16246]: --> [7:CONNECT]
Feb 17 10:09:11.98: [16246]: --> [5:ERROR]
Feb 17 10:09:11.98: [16246]: MODEM Command error
Feb 17 10:09:11.98: [16246]: FCS error
Feb 17 10:09:11.98: [16246]: DELAY 1500 ms
Feb 17 10:09:13.48: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:09:13.59: [16246]: --> [7:CONNECT]
Feb 17 10:09:13.59: [16246]: <-- data [32]
Feb 17 10:09:13.59: [16246]: <-- data [2]
Feb 17 10:09:15.57: [16246]: --> [7:CONNECT]
Feb 17 10:09:15.57: [16246]: <-- data [23]
Feb 17 10:09:15.57: [16246]: <-- data [2]
Feb 17 10:09:16.73: [16246]: --> [7:CONNECT]
Feb 17 10:09:16.73: [16246]: <-- data [13]
Feb 17 10:09:16.73: [16246]: <-- data [2]
Feb 17 10:09:17.62: [16246]: --> [2:OK]
Feb 17 10:09:17.62: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:18.77: [16246]: --> [7:CONNECT]
Feb 17 10:09:19.40: [16246]: --> [5:ERROR]
Feb 17 10:09:19.40: [16246]: MODEM Command error
Feb 17 10:09:19.40: [16246]: FCS error
Feb 17 10:09:19.40: [16246]: DELAY 70 ms
Feb 17 10:09:19.47: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:09:19.58: [16246]: --> [7:CONNECT]
Feb 17 10:09:19.58: [16246]: <-- data [3]
Feb 17 10:09:19.58: [16246]: <-- data [2]
Feb 17 10:09:20.79: [16246]: --> [2:OK]
Feb 17 10:09:20.79: [16246]: RECV send CRP (command repeat)
Feb 17 10:09:20.79: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:23.34: [16246]: --> [7:CONNECT]
Feb 17 10:09:23.50: [16246]: --> [5:ERROR]
Feb 17 10:09:23.50: [16246]: MODEM Command error
Feb 17 10:09:23.50: [16246]: FCS error
Feb 17 10:09:23.50: [16246]: DELAY 70 ms
Feb 17 10:09:23.57: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:09:23.68: [16246]: --> [7:CONNECT]
Feb 17 10:09:23.68: [16246]: <-- data [3]
Feb 17 10:09:23.68: [16246]: <-- data [2]
Feb 17 10:09:24.89: [16246]: --> [2:OK]
Feb 17 10:09:24.89: [16246]: RECV send CRP (command repeat)
Feb 17 10:09:24.89: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:28.29: [16246]: --> [7:CONNECT]
Feb 17 10:09:28.31: [16246]: --> [5:ERROR]
Feb 17 10:09:28.31: [16246]: MODEM Command error
Feb 17 10:09:28.31: [16246]: FCS error
Feb 17 10:09:28.31: [16246]: DELAY 70 ms
Feb 17 10:09:28.38: [16246]: <-- [9:AT+FTH=3\r]
Feb 17 10:09:28.49: [16246]: --> [7:CONNECT]
Feb 17 10:09:28.49: [16246]: <-- data [3]
Feb 17 10:09:28.49: [16246]: <-- data [2]
Feb 17 10:09:29.70: [16246]: --> [2:OK]
Feb 17 10:09:29.70: [16246]: RECV send CRP (command repeat)
Feb 17 10:09:29.70: [16246]: <-- [9:AT+FRH=3\r]
Feb 17 10:09:36.70: [16246]: --> [0:]
Feb 17 10:09:36.70: [16246]: MODEM <Empty line>
Feb 17 10:09:36.70: [16246]: <-- data [1]
Feb 17 10:09:36.71: [16246]: --> [2:OK]
Feb 17 10:09:36.71: [16246]: RECV FAX: No answer (T.30 T1 timeout)
Feb 17 10:09:36.71: [16246]: RECV FAX: end
Feb 17 10:09:36.71: [16246]: SESSION END

===

[fh@laura hylafax]$ cat etc/config.ttyS0
# $Id: usr-rts,v 1.7 2004/05/19 21:17:23 lhoward Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#(...)
# OF THIS SOFTWARE.
#

# # Configuration for using the Class 1 command interface with # a USR Courier or Sportster modem and RTS/CTS flow control. # # CountryCode: 212 AreaCode: 22 FAXNumber: "+212 22 24 87 86" LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: high GettyArgs: "-h %l dx_%s" LocalIdentifier: "HP Service Center" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%P of %%T" MaxRecvPages: 25 # # # Modem-related stuff: should reflect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class1 # use class 1 interface ModemRate: 19200 # rate for DCE-DTE communication ModemFlowControl: rtscts # hardware flow control # ModemSetupDTRCmd: ATS13=1&D2 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not) ModemNoFlowCmd: AT&H0&I0&R1 # setup modem for no flow control ModemHardFlowCmd: AT&H1&I0&R2 # setup modem for hardware flow control ModemSoftFlowCmd: AT&H2&I2&R1 # setup modem for software flow control ModemResultCodesCmd: ATQ0X4 # enable result codes # ModemMfrQueryCmd: !USR ModemModelQueryCmd: ATI3 ModemRevQueryCmd: ATI7 # XXX, returns a multi-line result # # When AT+FCLASS=1 is issued the modem automatically switches # to software flow control; these parameters let the fax software # reset flow control as needed after entering Class 1. # Class1NFLOCmd: AT&H0&I0&R1 # setup modem for no flow control Class1HFLOCmd: AT&H1&I0&R2 # setup modem for hardware flow control Class1SFLOCmd: "" # modem does this automatically # # The remainder of this configuration is included so that the # modem "idles" in Class 0 while not sending or receiving facsimile. # ModemSetupAACmd: AT+FCLASS=0&H1&I0&R2 # leave modem in class 0 ModemAnswerCmd: AT+FCLASS=1&H1&I0&R2A # force RTS/CTS after change # # Disables the reporting of bad frames by the modem. This # overcomes a firmware problem in the x2 and V90 Sportsters. # It is not necessary for the Courier modem. # Class2NRCmd: AT+FNR=1,1,1,0

Thanks again


Franck Horlaville
IT Manager
Qualitech


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Follow-Ups:
- Re: [hylafax-users] receiving on an external usr courier ?
  - From: Alex Wang
- Re: [hylafax-users] receiving on an external usr courier ?
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] Need recommendation for a cheap ISDN Solution
Next by Date: Re: [hylafax-users] receiving on an external usr courier ?
Previous by thread: Re: [hylafax-users] Need recommendation for a cheap ISDN Solution
Next by thread: Re: [hylafax-users] receiving on an external usr courier ?
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services