[hylafax-users] R: Re: Blacklisted by modem

["bimbospank@xxxxxxxxxxx" <bimbospank@xxxxxxxxxxx>]

Thank a lot,
but where i can find the Init string in hylafax ?
I search 
in my config.ttyS0 but i can find the init modem string: my ttyS0:

ModemType:		Class1		# use class 1 interface
ModemRate:		19200		# rate 
for DCE-DTE communication
ModemFlowControl:	xonxoff		# software flow 
control
#
ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
ModemResultCodesCmd:	ATQ0X4		# enable result codes
#
ModemMfrQueryCmd:	!
USR
ModemModelQueryCmd:	ATI3
ModemRevQueryCmd:	ATI7		# XXX returns a 
multi-line result
#
# When AT+FCLASS=1 is issued the modem 
automatically switches
# to software flow control; these parameters let 
the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd:		AT&H0&I0&R1	# setup modem for no flow control
Class1HFLOCmd:		AT&H1&I0&R2	# setup modem for hardware flow control
Class1SFLOCmd:		""		# modem does this automatically
#
# This should 
resolve "DIS/DTC received 3 times" errors:
#
Class1ResponseWaitCmd:	
AT+FRS=1	# wait after sending TCF for response
#
# The remainder of 
this configuration is included so that the
# modem "idles" in Class 0 
while not sending or receiving facsimile.
#
ModemSetupAACmd:	
AT+FCLASS=0	# leave modem idling in class 0
ModemAnswerCmd:		
AT+FCLASS=1A	# answer in Class 1
#
# Disables the reporting of bad 
frames by the modem.  This
# overcomes a firmware problem in the x2 and 
V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd:    AT+FNR=1,1,1,0

Thank a lot for answer.
Spank.Italy


----Messaggio originale----
Da: support@xxxxxxxxxxxx
Data: 26-gen-2006 
23.37
A: <hylafax-users@xxxxxxxxxxx>
Ogg: Re: [hylafax-users] 
Blacklisted by modem

Hello,

A few of our Italian customers have also 
experienced the modem blacklist
issue with the Mainpine RockForce fax 
cards.

If your modem includes the Agere chipset, you can append AT%T21,
1d,0 to the
init string to disable the blacklisting feature.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*