Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Can't receive faxes.



Erik P. Olsen wrote:

My old reliable modem, Lasat Safire 288, died suddenly and assuming I found a suitable replacement, I bought a Trust 56K V92 external modem. However, it turned out to be a very louzy modem. It can send faxes, but they go at a very low speed and when receiving it stops with a strange error.

Attached is the session transcript of such failure. I would appreciate if someone could tell me what I can do to make this modem behave.


Dec 13 14:32:08.56: [ 3696]: <-- [9:AT+FRS=7\r]
Dec 13 14:32:38.55: [ 3696]: MODEM <Timeout>

I presume that you find "failure to receive silence" to be "a strange error".

This probably indicates that the +FRS/+FTS commands are invalid for your modem. That's unfortunate.

In your modem config file set the following:

 Class1PPMWaitCmd:       "<delay:7>"
 Class1TCFWaitCmd:       "<delay:7>"
 Class1EOPWaitCmd:       "<delay:9>"
 Class1SwitchingCmd:     "<delay:7>"

Then please send one of the session logs describing the "slow" sending problem.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services