Re: [hylafax-users] force outbound to a specific tty

[Jehan PROCACCIA <Jehan.Procaccia@xxxxxxxxxxx>]

adding ModemGroup:    "any: ttyS0"  to /var/spool/hylafax/etc/config 
freezes the sending of fax, nothing is sent anyore :-(
My job ends like this:
18   127 F   uucp 4333          0:0   0:12         Kill time expired

So I removed the (ModemGroup:    "any: ttyS0") and now if I send a fax 
to ttyS0 phone number (4949) it uses ttyS0 to sends it,  obviously it is 
busy, and if I send a fax to the ttyS1 phone number (4333)  it's ttyS1 
that tries to send it, again obviously busy  :-(
It's getting me crazy ,

Any idea on how can I force the sending and incoming fax ?, I just one 
one of my modem to send to the other one, I can I force the outgoing modem ?
thanks

PS here's the situation:
$ faxstat -ds
HylaFAX scheduler on hylafax.int-evry.fr: Running
Modem ttyS0 (4949): Running and idle
Modem ttyS1 (4333): Running and idle

JID  Pri S  Owner Number       Pages Dials     TTS Status
17   116 F   uucp 4333          0:2  12:12         Busy signal detected; too
18   127 F   uucp 4333          0:0   0:12         Kill time expired
19   125 F   uucp 4333          0:2   2:12         Job aborted by request

JID  Pri S  Owner Number       Pages Dials     TTS Status
20   124 S   uucp 4949          0:2   3:12   13:26 Busy signal detected
21   125 S   uucp 4333          0:2   2:12   13:25 Busy signal detected


Jehan PROCACCIA wrote:

> OK, I just added :
> ModemGroup:    "any: ttyS0"
> I restarted hylafax and resent my fax , because the other one had "to 
> many attempts to dial" :-(
> and now isn't transmitted at all anymore !?
>
> $ faxstat -ds
> HylaFAX scheduler on hylafax.int-evry.fr: Running
> Modem ttyS0 (4949): Running and idle
> Modem ttyS1 (4333): Running and idle
>
> JID  Pri S  Owner Number       Pages Dials     TTS Status
> 17   116 F   uucp 4333          0:2  12:12         Busy signal 
> detected; too
>
> JID  Pri S  Owner Number       Pages Dials     TTS Status
> 18   127 W   uucp 4333          0:0   0:12
>
> Even if I force it now:
> -bash-3.00$ faxalter -v -a now 18
> Trying localhost (127.1.0.1) at port 4559...
> Connected to localhost.
> 220 hylafax.int-evry.fr server (HylaFAX (tm) Version 4.2.3) ready.
> -> USER uucp
> 230 User uucp logged in.
> -> JOB 18
> 200 Current job: jobid: 18 groupid: 18.
> -> JSUSP
> 200 Job 18 suspended.
> -> JPARM SENDTIME NOW
> 213 SENDTIME set to NOW.
> -> JSUBM
> 200 Job 18 submitted.
> Job 18: done.
>
> By the way is it possible to resend the "to many attempts to dial"
> $ su - uucp
> -bash-3.00$ faxstat -ds
> JID  Pri S  Owner Number       Pages Dials     TTS Status
> 17   116 F   uucp 4333          0:2  12:12         Busy signal 
> detected; too
> -bash-3.00$ faxalter -v -a now 17
> Trying localhost (127.1.0.1) at port 4559...
> Connected to localhost.
> 220 hylafax.int-evry.fr server (HylaFAX (tm) Version 4.2.3) ready.
> -> USER uucp
> 230 User uucp logged in.
> -> JOB 17
> 200 Current job: jobid: 17 groupid: 17.
> -> JSUSP
> 504 Job 17 not suspended; already done.
>
> Thanks.
>
> Darren Nickerson wrote:
>
> > One quick way to accomplish this would be to redefine the default 
> > modem group "any" to include only ttyS0. By default the 'any' group 
> > contains all modems, but you can easily redefine it with the 
> > following addition to the server config file (usually 
> > /var/spool/hylafax/etc/config):
> >
> > ModemGroup:    "any: ttyS0"
> >
> > This will cause HylaFAX to only schedule outbound jobs to the ttyS0 
> > modem device.
> >
> > See:
> >
> > http://www.hylafax.org/content/Handbook:Advanced_Server_Configuration:Modem_Groups 
> >
> >
> > -Darren
> >
> >
> > ----- Original Message ----- From: "Jehan PROCACCIA" 
> > <Jehan.Procaccia@xxxxxxxxxxx>
> > To: <hylafax-users@xxxxxxxxxxx>
> > Sent: Monday, January 16, 2006 11:46 AM
> > Subject: [hylafax-users] force outbound to a specific tty
> >
> >
> > > Hello, I run hylafax with 2 modems on ttyS0 and ttyS1
> > > I send fax through emails, so they finally get queud in hylafax system,
> > > I want (for testing purposes ..) to be able to send fax from ttyS0 
> > > to ttyS1, but in my config fax keep trying to be emetted from ttyS1 
> > > and as I as put the ttyS1 phone number as destination, it keeps 
> > > trying to send fax to himself :-(
> > > $ faxstat -ds
> > > HylaFAX scheduler on hylafax.int-evry.fr: Running
> > > Modem ttyS0 (4949): Running and idle
> > > Modem ttyS1 (4333): Running and idle
> > > JID  Pri S  Owner Number       Pages Dials     TTS Status
> > > 17   116 F   uucp 4333          0:2  12:12         Busy signal 
> > > detected; too
> > >
> > > How can I tell it to transmit with ttyS0 an not ttyS1, I don't see 
> > > in the config why it tries to send trough  ttyS1 ?  how hylafax 
> > > choose which modem for outbound ? I do anderstand that inbound works 
> > > if I have a faxgetty on the tty, which is what I have for ttyS1 only :
> > > $ ps auwx | grep faxgetty
> > > uucp     15125  0.0  0.3   6716  1960 pts/0    S    17:24   0:00 
> > > /usr/sbin/faxgetty ttyS1
> > >
> > > Thanks
> > >
> > > ____________________ HylaFAX(tm) Users Mailing List 
> > > _______________________
> > >  To subscribe/unsubscribe, click 
> > > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> > > /dev/null
> > >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*