|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] force outbound to a specific tty
OK, I just added :
ModemGroup: "any: ttyS0"
I restarted hylafax and resent my fax , because the other one had "to
many attempts to dial" :-(
and now isn't transmitted at all anymore !?
$ faxstat -ds
HylaFAX scheduler on hylafax.int-evry.fr: Running
Modem ttyS0 (4949): Running and idle
Modem ttyS1 (4333): Running and idle
JID Pri S Owner Number Pages Dials TTS Status
17 116 F uucp 4333 0:2 12:12 Busy signal detected; too
JID Pri S Owner Number Pages Dials TTS Status
18 127 W uucp 4333 0:0 0:12
Even if I force it now:
-bash-3.00$ faxalter -v -a now 18
Trying localhost (127.1.0.1) at port 4559...
Connected to localhost.
220 hylafax.int-evry.fr server (HylaFAX (tm) Version 4.2.3) ready.
-> USER uucp
230 User uucp logged in.
-> JOB 18
200 Current job: jobid: 18 groupid: 18.
-> JSUSP
200 Job 18 suspended.
-> JPARM SENDTIME NOW
213 SENDTIME set to NOW.
-> JSUBM
200 Job 18 submitted.
Job 18: done.
By the way is it possible to resend the "to many attempts to dial"
$ su - uucp
-bash-3.00$ faxstat -ds
JID Pri S Owner Number Pages Dials TTS Status
17 116 F uucp 4333 0:2 12:12 Busy signal detected; too
-bash-3.00$ faxalter -v -a now 17
Trying localhost (127.1.0.1) at port 4559...
Connected to localhost.
220 hylafax.int-evry.fr server (HylaFAX (tm) Version 4.2.3) ready.
-> USER uucp
230 User uucp logged in.
-> JOB 17
200 Current job: jobid: 17 groupid: 17.
-> JSUSP
504 Job 17 not suspended; already done.
Thanks.
Darren Nickerson wrote:
One quick way to accomplish this would be to redefine the default
modem group "any" to include only ttyS0. By default the 'any' group
contains all modems, but you can easily redefine it with the following
addition to the server config file (usually
/var/spool/hylafax/etc/config):
ModemGroup: "any: ttyS0"
This will cause HylaFAX to only schedule outbound jobs to the ttyS0
modem device.
See:
http://www.hylafax.org/content/Handbook:Advanced_Server_Configuration:Modem_Groups
-Darren
----- Original Message ----- From: "Jehan PROCACCIA"
<Jehan.Procaccia@xxxxxxxxxxx>
To: <hylafax-users@xxxxxxxxxxx>
Sent: Monday, January 16, 2006 11:46 AM
Subject: [hylafax-users] force outbound to a specific tty
Hello, I run hylafax with 2 modems on ttyS0 and ttyS1
I send fax through emails, so they finally get queud in hylafax system,
I want (for testing purposes ..) to be able to send fax from ttyS0 to
ttyS1, but in my config fax keep trying to be emetted from ttyS1 and
as I as put the ttyS1 phone number as destination, it keeps trying to
send fax to himself :-(
$ faxstat -ds
HylaFAX scheduler on hylafax.int-evry.fr: Running
Modem ttyS0 (4949): Running and idle
Modem ttyS1 (4333): Running and idle
JID Pri S Owner Number Pages Dials TTS Status
17 116 F uucp 4333 0:2 12:12 Busy signal
detected; too
How can I tell it to transmit with ttyS0 an not ttyS1, I don't see in
the config why it tries to send trough ttyS1 ? how hylafax choose
which modem for outbound ? I do anderstand that inbound works if I
have a faxgetty on the tty, which is what I have for ttyS1 only :
$ ps auwx | grep faxgetty
uucp 15125 0.0 0.3 6716 1960 pts/0 S 17:24 0:00
/usr/sbin/faxgetty ttyS1
Thanks
____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
