Re: [hylafax-users] CL-MD56XX: Some faxe could be reveived, somenot

["Manuel H." <thrashthrashthrash@xxxxxx>]

Just want to tell, that i changed the modem. Now i have an rockwell base
modem and this works fine. Now i can receive faxes from fritzcards
too :-)

best wishes
m.

Am Donnerstag, den 05.01.2006, 09:47 -0500 schrieb Ivan Petrov:
> Hi Manuel,
> 
> I'm pretty sure the problem is the modem you're using. Try with another 
> modem if possible. One suggestion - avoid US Robotics (I used to have big 
> respect to this company in the past - sorry but not anymore!). Rockwell or 
> Lucent based modem would be your best choice.
> 
> Regards,
> Ivan
> 
> 
> ----- Original Message ----- 
> From: "Manuel H." <thrashthrashthrash@xxxxxx>
> To: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
> Cc: <hylafax-users@xxxxxxxxxxx>
> Sent: Thursday, January 05, 2006 9:03 AM
> Subject: Re: [hylafax-users] CL-MD56XX: Some faxe could be reveived, somenot
> 
> 
> > Hello, thank you for your answer!
> >
> > I tried it with ATA and had the same results (some work but the most
> > faxes didn not receive. You said that the modem is not detecting any
> > HDLC signals from the sender? How could i check this? I don't understand
> > why i get some faxes and others can't be receive? This must be a setting
> > in the config.ttyS0???? Why do i get an "NO CARRIER" message in the log?
> > Would be a different modem a solution, or whats your advise?
> >
> > Thank you, best wishes
> > m.
> >
> >
> >
> >
> > Am Mittwoch, den 04.01.2006, 09:53 -0800 schrieb Lee Howard:
> >> Manuel H. wrote:
> >>
> >> >>Jan 03 13:00:22.31: [ 8402]: SESSION BEGIN 000000035 495312842085
> >> >>Jan 03 13:00:22.31: [ 8402]: HylaFAX (tm) Version 4.2.1
> >> >>Jan 03 13:00:22.31: [ 8402]: <-- [6:ATAX3\r]
> >> >>Jan 03 13:00:27.30: [ 8402]: --> [7:CONNECT]
> >> >>Jan 03 13:00:27.30: [ 8402]: ANSWER: FAX CONNECTION  DEVICE 
> >> >>'/dev/ttyS0'
> >> >>Jan 03 13:00:27.30: [ 8402]: RECV FAX: begin
> >> >>Jan 03 13:00:27.30: [ 8402]: <-- data [32]
> >> >>Jan 03 13:00:27.30: [ 8402]: <-- data [2]
> >> >>Jan 03 13:00:28.67: [ 8402]: --> [7:CONNECT]
> >> >>Jan 03 13:00:28.67: [ 8402]: <-- data [23]
> >> >>Jan 03 13:00:28.67: [ 8402]: <-- data [2]
> >> >>Jan 03 13:00:29.43: [ 8402]: --> [7:CONNECT]
> >> >>Jan 03 13:00:29.43: [ 8402]: <-- data [10]
> >> >>Jan 03 13:00:29.43: [ 8402]: <-- data [2]
> >> >>Jan 03 13:00:29.88: [ 8402]: --> [2:OK]
> >> >>Jan 03 13:00:29.88: [ 8402]: <-- [9:AT+FRH=3\r]
> >> >>Jan 03 13:00:30.04: [ 8402]: --> [7:CONNECT]
> >> >>Jan 03 13:00:31.54: [ 8402]: --> [10:NO CARRIER]
> >> >>
> >>
> >> (log repeats the same thing over and over)
> >>
> >> Firstly, what's the ATAX3 for?  Why do you have ModemAnswerCmd set to
> >> ATAX3 and not just ATA?  My modem manuals indicate that all of the ATXn
> >> commands are intended for dialing (sending) and not answering
> >> (receiving).  So I'd guess that the behavior they'd cause in the wrong
> >> application would be unexpected.
> >>
> >> Anyway, the rest of the log tells us that the modem is unable to detect
> >> any HDLC signalling from the sender... which surely isn't the fault of
> >> the sender.  So the modem isn't doing what it's supposed to... possibly
> >> because of that X3.  Possibly due to other things.
> >>
> >> If you have a different modem try that if removing the X3 doesn't help.
> >>
> >> Lee.
> >>
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List 
> > _______________________
> >  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> >
> > 
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*