Re: [hylafax-users] PlusOnePage

[Andrea Bencini <andrea.bencini@xxxxxx>]

> Andrea Bencini wrote:
>
> >I installed WHFC-1.2.3 .
> >I send my faxes through WHFCFAX port (Apple 16/600 PS - A4).
> >My problem is:
> >when  I send one page (only one, I am sure) to different fax machines,
some
> >receive only one page (the one I  sent) correctly,  other receive two
pages,
> >the first one  correctly, the second with this messages - "one page don't
> >received".
> >These ones work correctly when they receive faxes from other fax
machines.
> >Can you help me?
> >
>
> Please send a session log illustrating this problem.
>
> Thanks,
>
> Lee.
>
This is the session log with problem:

nov 30 09:16:41.30: [26080]: SESSION BEGIN 000000072 3905510880558878196
nov 30 09:16:41.30: [26080]: HylaFAX (tm) Version 4.2.2
nov 30 09:16:41.30: [26080]: SEND FAX: JOB 65 DEST 10880558878196 COMMID
000000072 DEVICE '/dev/ttyS0'
nov 30 09:16:41.30: [26080]: <-- [9:AT+FLO=2\r]
nov 30 09:16:41.44: [26080]: --> [2:OK]
nov 30 09:16:41.44: [26080]: <-- [9:AT+FPP=0\r]
nov 30 09:16:41.58: [26080]: --> [2:OK]
nov 30 09:16:41.58: [26080]: <-- [9:AT+FBO=0\r]
nov 30 09:16:41.72: [26080]: --> [2:OK]
nov 30 09:16:41.72: [26080]: <-- [10:AT+FCT=30\r]
nov 30 09:16:41.86: [26080]: --> [2:OK]
nov 30 09:16:41.86: [26080]: <-- [15:AT+FNR=1,1,1,0\r]
nov 30 09:16:42.00: [26080]: --> [2:OK]
nov 30 09:16:42.00: [26080]: <-- [9:AT+FIE=0\r]
nov 30 09:16:42.13: [26080]: --> [2:OK]
nov 30 09:16:42.13: [26080]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
nov 30 09:16:42.28: [26080]: --> [2:OK]
nov 30 09:16:42.28: [26080]: DIAL 10880558878196
nov 30 09:16:42.28: [26080]: <-- [19:ATDT10880558878196\r]
nov 30 09:17:04.99: [26080]: --> [4:+FCO]
nov 30 09:17:08.59: [26080]: --> [27:+FCI:"     039 055 8878196"]
nov 30 09:17:08.59: [26080]: REMOTE CSI "039 055 8878196"
nov 30 09:17:08.60: [26080]: --> [20:+FIS:1,5,0,2,1,0,0,3]
nov 30 09:17:08.60: [26080]: --> [2:OK]
nov 30 09:17:08.60: [26080]: REMOTE best rate 14400 bit/s
nov 30 09:17:08.60: [26080]: REMOTE max A4 page width (215 mm)
nov 30 09:17:08.60: [26080]: REMOTE max unlimited page length
nov 30 09:17:08.60: [26080]: REMOTE best vres 7.7 line/mm
nov 30 09:17:08.60: [26080]: REMOTE best format 2-D MR
nov 30 09:17:08.60: [26080]: REMOTE best 10 ms/scanline
nov 30 09:17:08.60: [26080]: USE 14400 bit/s
nov 30 09:17:08.60: [26080]: SEND file "docq/doc64.ps;01"
nov 30 09:17:08.61: [26080]: USE A4 page width (215 mm)
nov 30 09:17:08.61: [26080]: USE unlimited page length
nov 30 09:17:08.61: [26080]: USE 7.7 line/mm
nov 30 09:17:08.61: [26080]: USE 1-D MH
nov 30 09:17:08.61: [26080]: USE 10 ms/scanline
nov 30 09:17:08.61: [26080]: <-- [23:AT+FIS=1,5,0,2,0,0,0,3\r]
nov 30 09:17:08.75: [26080]: --> [2:OK]
nov 30 09:17:08.75: [26080]: <-- [7:AT+FDT\r]
nov 30 09:17:08.93: [26080]: --> [20:+FCS:1,5,0,2,0,0,0,3]
nov 30 09:17:15.87: [26080]: --> [7:CONNECT]
nov 30 09:17:15.87: [26080]: SEND begin page
nov 30 09:17:15.87: [26080]: <-- data [1027]
nov 30 09:17:15.87: [26080]: <-- data [1028]
nov 30 09:17:15.87: [26080]: <-- data [1032]
nov 30 09:17:15.87: [26080]: <-- data [1035]
nov 30 09:17:17.87: [26080]: <-- data [1033]
nov 30 09:17:17.87: [26080]: <-- data [1037]
nov 30 09:17:17.87: [26080]: <-- data [1035]
nov 30 09:17:17.87: [26080]: <-- data [1045]
nov 30 09:17:20.30: [26080]: <-- data [1039]
nov 30 09:17:20.30: [26080]: <-- data [1030]
nov 30 09:17:20.30: [26080]: <-- data [1031]
nov 30 09:17:20.30: [26080]: <-- data [1055]
nov 30 09:17:22.05: [26080]: <-- data [1032]
nov 30 09:17:22.05: [26080]: <-- data [1032]
nov 30 09:17:24.46: [26080]: <-- data [1046]
nov 30 09:17:24.46: [26080]: <-- data [1042]
nov 30 09:17:24.46: [26080]: <-- data [1035]
nov 30 09:17:24.46: [26080]: <-- data [1029]
nov 30 09:17:26.46: [26080]: <-- data [816]
nov 30 09:17:26.46: [26080]: SENT 19246 bytes of data
nov 30 09:17:26.46: [26080]: SEND 1D RTC
nov 30 09:17:26.46: [26080]: <-- data [9]
nov 30 09:17:26.46: [26080]: SEND end page
nov 30 09:17:26.46: [26080]: SEND send EOP (no more pages or documents)
nov 30 09:17:26.46: [26080]: <-- data [2]
nov 30 09:17:34.41: [26080]: --> [7:+FHS:00]
nov 30 09:17:34.41: [26080]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
nov 30 09:17:34.41: [26080]: SEND recv MCF (message confirmation)
nov 30 09:17:34.41: [26080]: SEND FAX (000000072): FROM
andrea.bencini@xxxxxx TO 10880558878196 (page 1 of 1 sent in 0:26)
nov 30 09:17:34.41: [26080]: SEND FAX (000000072): FROM
andrea.bencini@xxxxxx TO 10880558878196 (docq/doc64.ps;01 sent in 0:26)
nov 30 09:17:35.42: [26080]: <-- [5:ATH0\r]
nov 30 09:17:35.42: [26080]: --> [2:OK]
nov 30 09:17:35.42: [26080]: SESSION END

Thanks
Andrea


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*