Re: [hylafax-users] JobRetryNoAnswer doesn't work?

[Mark Hunting <mark@xxxxxxxxxx>]

Because I changed NOFCON into NOANSWER in Class2Modem::dialResponse, the 
dial function now gives back a status of 3, which is correct. I see that 
the dial function is called in pageSendApp::sendPage:

CallStatus callstat = getModem()->dial(number, notice);

callstat will be 3 after I close the connection on my voice phone. 
However, hylafax still calls my voice phone 3 times. I tried to put 
things after 'case ClassModem::NOANSWER:' to let it stop after the first 
call, but without a result. I can't use protoTrace in this function, 
that's an extra handicap. Is there another function that writes 
something in a logfile that's available in pageSendApp?

Or can somebody see what's wrong in pageSendApp::sendPage in hylafax 
4.2.2? Either case ClassModem::NOANSWER is not true (should be true 
however), or the sendFailed(req, send_retry, notice, 
requeueTTS[callstat]); that follows doesn't do the correct job.

Thanks again,
Mark


Mark Hunting wrote:

> Ah, protoTrace() writes into the session log.
>
> Mark Hunting wrote:
>
> > I thought I found the problem. In Class2Modem::dialResponse is this 
> > line:
> >
> > case 11:        return (NOFCON);  // No answer (T.30 timeout)
> >
> > I changed the 'NOFCON' to 'NOANSWER'
> >
> > case 11:        return (NOANSWER);  // No answer (T.30 timeout)
> >
> > Unfortunately, this doesn't give the desired result, Hylafax still 
> > calls me three times. I have very little experience in C++, and 
> > because the Hylafax source code is a bit too complicated for me I 
> > don't know how to get some information into a logfile. This would be 
> > handy to see what's happening. How can I write something in a 
> > logfile? It doesn't matter if it is syslog or the session log.
> >
> > Thanks!
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click 
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*