Re: [hylafax-users] JobRetryNoAnswer doesn't work?

[Mark Hunting <mark@xxxxxxxxxx>]

I thought I found the problem. In Class2Modem::dialResponse is this line:

case 11:        return (NOFCON);  // No answer (T.30 timeout)

I changed the 'NOFCON' to 'NOANSWER'

case 11:        return (NOANSWER);  // No answer (T.30 timeout)

Unfortunately, this doesn't give the desired result, Hylafax still calls 
me three times. I have very little experience in C++, and because the 
Hylafax source code is a bit too complicated for me I don't know how to 
get some information into a logfile. This would be handy to see what's 
happening. How can I write something in a logfile? It doesn't matter if 
it is syslog or the session log.

Thanks!

Aidan Van Dyk wrote:

> * Lee Howard <faxguy@xxxxxxxxxxxxxxxx> [051123 12:32]:
>  
>
>
> In Class2Modem::dialResponse(), we do try and parse the FHNG resonses.
>
> In a typical Class2 "No carrier" situation, we see somthing like:
> 	Nov 23 08:58:07.36: [26604]: DIAL 916196908599
> 	Nov 23 08:58:07.36: [26604]: <-- [25:ATS0=255;DT916196908599@\r]
> 	Nov 23 08:59:13.44: [26604]: --> [9:+FHNG: 11]
> 	Nov 23 08:59:13.44: [26604]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
> 	Nov 23 08:59:13.44: [26604]: SEND FAILED: JOB 2059 DEST 916196908599 ERR No answer (T.30 T1 timeout)
> 	Nov 23 08:59:13.44: [26604]: <-- [5:ATH0\r]
> 	Nov 23 08:59:13.44: [26604]: --> [2:OK]
> 	Nov 23 08:59:13.44: [26604]: SESSION END
>
> And +FHNG:11 response to the dial *should* go back to as ClassModem::NOANSWER.
>
> That, in turn should be checked as retryMAX[NOANSWER] (where NOANSWER == 3)
> in FaxServer::sendFax(...).
>
> Mark, can you put ServerTracing up to 0xFFFF (put it first in the config
> file so we see config file parsing) for the device, and show all the
> logs for a complete set of sends on that job?  Session logs as well,
> just for verification.
>
> Send them to me directly, or post them if they are really large (which
> they should be).
>
> Is the 4.2.2 from source, or debian packages?
>
> a.
>
>  

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*