When I do a xferfaxlog -dest* there is a destination that has no Pages
sent just all errors. Usually this has meant in the past this
isn't really a fax number. I called the number and it sounded not
like a typical fax. This is one of the conversations. I
don't know how to read this though
Nov 03 20:00:13.82: [13400]: SESSION BEGIN 000542522 17314248322
Nov 03 20:00:13.82: [13400]: HylaFAX (tm) Version 4.2.2
Nov 03 20:00:13.82: [13400]: SEND FAX: JOB 2316979 DEST 7314248322 COMMID 000542522 DEVICE '/dev/ttyds14'
Nov 03 20:00:13.82: [13400]: <-- [10:AT+FBOR=0\r]
Nov 03 20:00:13.82: [13400]: --> [2:OK]
Nov 03 20:00:13.82: [13400]: <-- [13:AT+FPHCTO=30\r]
Nov 03 20:00:13.82: [13400]: --> [5:ERROR]
Nov 03 20:00:13.82: [13400]: MODEM Command error
Nov 03 20:00:13.82: [13400]: <-- [24:AT+FDCC=1,D,2,2,0,2,0,0\r]
Nov 03 20:00:13.82: [13400]: --> [2:OK]
Nov 03 20:00:13.82: [13400]: DIAL 17314248322
Nov 03 20:00:13.82: [13400]: <-- [23:ATS0=255;DT17314248322\r]
Nov 03 20:01:00.89: [13400]: --> [9:+FHNG: 11]
Nov 03 20:01:00.89: [13400]: REMOTE HANGUP: No answer (T.30 T1 timeout) (code 11)
Nov 03 20:01:00.89: [13400]: SEND FAILED: JOB 2316979 DEST 7314248322 ERR No answer (T.30 T1 timeout)
Nov 03 20:01:00.89: [13400]: SEND FAILED: JOB 2316979 DEST 7314248322 ERR No answer (T.30 T1 timeout); too many attempts to dial
Nov 03 20:01:00.89: [13400]: <-- [5:ATH0\r]
Nov 03 20:01:00.89: [13400]: --> [2:OK]
Nov 03 20:01:00.89: [13400]: SESSION END
