Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Data-only receive mode for modem



I am using hylafax 4.2 in a fax send, ppp dial-in environment. The problem I am experiencing is that the modem is now answering calls in a fax mode, not as a data call.

Is there a way to set hylafax to answer all calls as data calls? This is a send-only environment for faxing and the dial-in is used for support. I feel confident that the ppp end of configuration is done properly as the dial-in was working for several weeks. An identical system experienced the same fax-only mode problem after a spam fax was sent to that server.

If it matters, the modem in question is an IBM PCI V90 hardware model.

Thanks,

Stephen

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services