|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] seeing failures on the cannot 9000 again
Any ideas
Your facsimile job to 00769-3639702 failed because:
RSRPEC error/got DCN; too many attempts to dial
---- Transcript of session follows ----
Oct 20 09:41:46.27: [24479]: SESSION BEGIN 000001195 7693639702
Oct 20 09:41:46.27: [24479]: HylaFAX (tm) Version 4.2.2rc1
Oct 20 09:41:46.27: [24479]: SEND FAX: JOB 403 DEST 00769-3639702
COMMID 000001195 DEVICE '/dev/ttyS1' FROM 'faxusers
<steve@xxxxxxxxxxxxxxxx,sluo@xxxxxxxxxxxxxxxx>' USER faxusers
Oct 20 09:41:46.27: [24479]: <-- [12:AT+FCLASS=1\r]
Oct 20 09:41:46.28: [24479]: --> [2:OK]
Oct 20 09:41:46.28: [24479]: DIAL 007693639702
Oct 20 09:41:46.28: [24479]: <-- [17:ATDT007693639702\r]
Oct 20 09:42:17.74: [24479]: --> [7:CONNECT]
Oct 20 09:42:19.53: [24479]: --> [2:OK]
Oct 20 09:42:19.53: [24479]: REMOTE NSF "00 00 11 80 00 8A 49 10 54
49 44 41 20 20 20 20 20 20 20 20 20 20 20 20 00 73 00 80 80 80 02 01 01"
Oct 20 09:42:19.53: [24479]: NSF remote fax equipment: Canon Laser
Class 9000 Series
Oct 20 09:42:19.53: [24479]: NSF remote station ID: "TIDA "
Oct 20 09:42:19.53: [24479]: <-- [9:AT+FRH=3\r]
Oct 20 09:42:19.55: [24479]: --> [7:CONNECT]
Oct 20 09:42:20.25: [24479]: --> [2:OK]
Oct 20 09:42:20.25: [24479]: REMOTE CSI "00867693639702"
Oct 20 09:42:20.25: [24479]: <-- [9:AT+FRH=3\r]
Oct 20 09:42:20.27: [24479]: --> [7:CONNECT]
Oct 20 09:42:20.59: [24479]: --> [2:OK]
Oct 20 09:42:20.59: [24479]: REMOTE best rate 14400 bit/s
Oct 20 09:42:20.59: [24479]: REMOTE max A4 page width (215 mm)
Oct 20 09:42:20.59: [24479]: REMOTE max unlimited page length
Oct 20 09:42:20.59: [24479]: REMOTE best vres 15.4 line/mm
Oct 20 09:42:20.59: [24479]: REMOTE format support: MH, MR, MMR
Oct 20 09:42:20.59: [24479]: REMOTE supports T.30 Annex A, 256-byte ECM
Oct 20 09:42:20.59: [24479]: REMOTE best 10 ms/scanline
Oct 20 09:42:20.59: [24479]: USE 14400 bit/s
Oct 20 09:42:20.59: [24479]: USE error correction mode
Oct 20 09:42:20.59: [24479]: SEND file "docq/doc402.ps;c1"
Oct 20 09:42:20.59: [24479]: USE A4 page width (215 mm)
Oct 20 09:42:20.59: [24479]: USE unlimited page length
Oct 20 09:42:20.59: [24479]: USE 7.7 line/mm
Oct 20 09:42:20.59: [24479]: USE 2-D MMR
Oct 20 09:42:20.59: [24479]: USE 0 ms/scanline
Oct 20 09:42:20.59: [24479]: SEND training at v.17 14400 bit/s
Oct 20 09:42:20.59: [24479]: <-- [9:AT+FRS=7\r]
Oct 20 09:42:20.71: [24479]: --> [2:OK]
Oct 20 09:42:20.71: [24479]: <-- [9:AT+FTH=3\r]
Oct 20 09:42:20.76: [24479]: --> [7:CONNECT]
Oct 20 09:42:22.55: [24479]: --> [7:CONNECT]
Oct 20 09:42:23.01: [24479]: --> [2:OK]
Oct 20 09:42:23.01: [24479]: <-- [9:AT+FTS=7\r]
Oct 20 09:42:23.10: [24479]: --> [2:OK]
Oct 20 09:42:23.10: [24479]: <-- [11:AT+FTM=145\r]
Oct 20 09:42:23.14: [24479]: --> [7:CONNECT]
Oct 20 09:42:26.26: [24479]: --> [2:OK]
Oct 20 09:42:26.26: [24479]: <-- [9:AT+FRH=3\r]
Oct 20 09:42:26.65: [24479]: --> [7:CONNECT]
Oct 20 09:42:27.57: [24479]: --> [2:OK]
Oct 20 09:42:27.57: [24479]: TRAINING failed
Oct 20 09:42:27.57: [24479]: The destination appears to have trouble
with V.17.
Oct 20 09:42:27.57: [24479]: <-- [9:AT+FTH=3\r]
Oct 20 09:42:27.62: [24479]: --> [7:CONNECT]
Oct 20 09:42:28.93: [24479]: --> [2:OK]
Oct 20 09:42:28.93: [24479]: SEND FAILED: JOB 403 DEST 00769-3639702
ERR RSRPEC error/got DCN; too many attempts to dial
Oct 20 09:42:28.93: [24479]: <-- [5:ATH0\r]
Oct 20 09:42:30.47: [24479]: --> [2:OK]
Oct 20 09:42:30.47: [24479]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
