|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Hylafax and HSF Modem setup
Linuxant support replied that I should use the 'AT &F X1' init. string
to see if there is a difference for the 'no carrier' issue. They also
suggested rebooting. Well, I did, several times.
I can't seem to find where to put this init string however.
/var/spool/hylafax/etc/config.modem looked promising but on the other
hand I thought it would use data from Class1 or Class1.0 config files?
Where in Hylafax config should I put the 'AT &F X1' init. string?
Sorry Lee - the syslog was this:
----------------------------------------------------------------------------------------------------------
Oct 13 16:15:36 localhost FaxQueuer[3030]: HylaFAX (tm) Version 4.2.2
Oct 13 16:15:36 localhost FaxQueuer[3030]: Copyright (c) 1990-1996 Sam
Leffler
Oct 13 16:15:36 localhost FaxQueuer[3030]: Copyright (c) 1991-1996
Silicon Graphics, Inc.
Oct 13 16:15:36 localhost FaxGetty[2895]: HELLO
Oct 13 16:15:36 localhost HylaFAX[3032]: HylaFAX INET Protocol Server:
restarted.
Oct 13 16:15:43 localhost FaxGetty[2895]: QUIT
Oct 13 16:15:43 localhost FaxGetty[2895]: CLOSE /dev/modem
Oct 13 16:15:43 localhost FaxGetty[3044]: OPEN /dev/modem HylaFAX (tm)
Version 4.2.2
Oct 13 16:15:53 localhost FaxGetty[3044]: MODEM ROCKWELL
RC288DPi/hsfmodem-7.18.00.06full
Oct 13 16:15:56 localhost FaxGetty[3068]: OPEN /dev/modem HylaFAX (tm)
Version 4.2.2
Oct 13 16:15:56 localhost FaxGetty[3068]: /dev/modem: Can not lock device.
Oct 13 16:17:05 localhost FaxGetty[3068]: MODEM HSFMODEM-7.18.00.06FULL
56000/
Oct 13 16:17:58 localhost FaxGetty[3068]: LOCKWAIT
Oct 13 16:18:08 localhost FaxSend[3261]: MODEM HSFMODEM-7.18.00.06FULL
56000/
Oct 13 16:18:08 localhost FaxSend[3261]: SEND FAX: JOB 7 DEST 2085031
COMMID 000000014 DEVICE '/dev/modem'
Oct 13 16:18:22 localhost FaxQueuer[3030]: SUBMIT JOB 8
Oct 13 16:19:10 localhost FaxSend[3261]: SEND FAILED: JOB 7 DEST 2085031
ERR No carrier detected
Oct 13 16:19:10 localhost FaxQueuer[3030]: NOTIFY: bin/notify "doneq/q7"
"failed" "1:12"
Oct 13 16:19:10 localhost FaxGetty[3068]: LOCKWAIT
Oct 13 16:19:11 localhost FaxQueuer[3030]: NOTIFY exit status: 0 (3294)
Oct 13 16:19:25 localhost FaxSend[3335]: MODEM HSFMODEM-7.18.00.06FULL
56000/
Oct 13 16:19:25 localhost FaxSend[3335]: SEND FAX: JOB 8 DEST 2085031
COMMID 000000015 DEVICE '/dev/modem'
Oct 13 16:20:27 localhost FaxSend[3335]: SEND FAILED: JOB 8 DEST 2085031
ERR No carrier detected
Oct 13 16:20:27 localhost FaxQueuer[3030]: NOTIFY: bin/notify "sendq/q8"
"requeued" "" "16:25"
Oct 13 16:20:28 localhost FaxQueuer[3030]: NOTIFY exit status: 0 (3345)
Oct 13 16:20:48 localhost FaxGetty[3068]: MODEM HSFMODEM-7.18.00.06FULL
56000/
------------------------------------------------------------------------------------------------------------------
Confused,
J
Lee Howard wrote:
This is the session log not syslog.
And, the NO CARRIER message is coming from the modem, so... you'd
probably need to contact Linuxant for a resolution to this. They
recently suggested to someone that they use an ATX command in their
dialstring.
Lee.
JC van der Walt wrote:
Thanks Lee!
So I got a key from them and the driver seems to be just peachy now.
Only now the syslog now tells me "no carrier detected":
The fax logfile:
--------------- Snippet: /var/spool/hylafax/log/c4
-----------------------
Oct 13 13:52:45.24: [ 3220]: SESSION BEGIN 000000004 14032881669
Oct 13 13:52:45.24: [ 3220]: HylaFAX (tm) Version 4.2.2
Oct 13 13:52:45.24: [ 3220]: SEND FAX: JOB 3 DEST 2881669 COMMID
000000004 DEVICE '/dev/modem'
Oct 13 13:52:45.24: [ 3220]: <-- [12:AT+FCLASS=1\r]
Oct 13 13:52:45.26: [ 3220]: --> [2:OK]
Oct 13 13:52:45.27: [ 3220]: DIAL 2881669
Oct 13 13:52:45.27: [ 3220]: <-- [12:ATDT2881669\r]
Oct 13 13:53:47.51: [ 3220]: --> [10:NO CARRIER]
Oct 13 13:53:47.51: [ 3220]: SEND FAILED: JOB 3 DEST 2881669 ERR No
carrier detected
Oct 13 13:53:47.51: [ 3220]: <-- [5:ATH0\r]
Oct 13 13:53:47.54: [ 3220]: --> [2:OK]
Oct 13 13:53:47.54: [ 3220]: SESSION END
---------------------------------------------------------------------------
Hylafax seems to think the modem is just fine
#cat status/modem
Running and idle
#
Apparently there used to be a bug related to this issue. But the
status looks to be resolved.
Any ideas?
Lee Howard wrote:
JC van der Walt wrote:
AT+FCLASS=?
0
OK
The Linuxant drivers only support fax with the registered version.
It's like $15.
Lee.
____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx <
/dev/null
*To learn about expensive HylaFAX(tm) support, mail sales@xxxxxxxxx*
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
