[hylafax-users] 4.2.2 & Mainpine not working

[Tom Miller <tom@xxxxxxxxxxxxxx>]

Does anyone have the same problem with version 4.2.2 and
Mainpine modem?

I reinstall Hylafax 4.2.2 and went through the same faxsetup
as before for version 4.2.1 except one thing I used class =
1.0 instead of 1.  The hylafax and modem doesn't pickup and
accept any incoming fax at all.  I have 8 port MainPine Oct+ .
 However, after ran the faxsetup modem only port ttyS4 and
ttyS11 were created the rest was not and have the following error:

Probing for best speed to talk to modem:
Unable to deduce DTE-DCE speed; check that you are using the
correct device and/or that your modem is setup properly.  If
all else fails, try the -s option to lock the speed.

What happen to faxstat?  It is different in 4.2.2
How to get faxstat or HylaFax to show status of all ttySx

Tom




---- Original message ----
>Date: Thu, 13 Oct 2005 10:33:49 +0100
>From: "support" <support@xxxxxxxxxxxx>  
>Subject: RE: regarding Q&A # 48  
>To: <tom@xxxxxxxxxxxxxx>
>
>Hi Tom.
>
>I don't have answers to your specific questions but will
discuss with our
>engineers and come back to you.  While you are waiting I
would suggest that
>you post your questions to the HylaFAX users list because we
have a lot of
>customers who monitor this and may have solved your problem.
>
>Regards
>
>Mainpine Support
>USA +1 718 701 2422 | Asia/Europe +44 1225 436137 
>support@xxxxxxxxxxxx | www.mainpine.com 
>
>-----Original Message-----
>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx] 
>Sent: 13 October 2005 06:46
>To: support@xxxxxxxxxxxx
>Subject: regarding Q&A # 48
>
>
>Every time I mannually touched or modified the
>/var/spool/hylafax/etc/config.ttyS4 the whole modem won't
work any more.  I
>manually modified those ttySX three time.
>two time required a reboot from the server. The third time it
still not
>working until now.  I am re-installing with the new version
of hylafax 4.2.2
>instead of 4.2.1.  Hope, it will fix it by installing
everything again.  Any
>thought?
>
>Thanks,
>Tom
>
>
>---- Original message ----
>>Date: Tue, 13 Sep 2005 10:11:20 +0100
>>From: "support" <support@xxxxxxxxxxxx>
>>Subject: RE: [hylafax-users] Incoming fax doesn't work
>>To: <tom@xxxxxxxxxxxxxx>
>>
>>Hi Tom.
>>
>>Class 1 and 1.0 are significantly more robust when used with
>HylaFAX.
>>
>>Regards
>>
>>Support
>>Mainpine Ltd.
>>e: support@xxxxxxxxxxxx
>>w: http://www.mainpine.com
>>t: +44(0) 1373 830888
>>f: +44(0) 1373 830768
>>
>>-----Original Message-----
>>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx]
>>Sent: 13 September 2005 08:14
>>To: support@xxxxxxxxxxxx
>>Subject: Re: [hylafax-users] Incoming fax doesn't work
>>
>>Thank you.
>>So Hylafax Class 1 driver is recommended for MainPine board?
>>
>>Thanks much,
>>Tom
>>
>>---- Original message ----
>>>Date: Sun, 4 Sep 2005 12:10:54 +0100
>>>From: "support" <support@xxxxxxxxxxxx>
>>>Subject: Re: [hylafax-users] Incoming fax doesn't work
>>>To: <tom@xxxxxxxxxxxxxx>, <hylafax-users@xxxxxxxxxxx>
>>>
>>>Hi Tom.
>>>
>>>Our support faq has answers to common HylaFAX questions
>>(answers # 47 to
>>>55), please take a look and let us know what's questions
>>remain;
>>>
>>>http://www.mainpine.com/q_a.html
>>>
>>>I would also suggest that you upgrade to the latest HylaFAX
>>release
>>>(4.2.2rc5) because of the work undertaken in the Class 1
>>driver.
>>>
>>>Regards
>>>
>>>Support
>>>Mainpine Ltd.
>>>e: support@xxxxxxxxxxxx
>>>w: http://www.mainpine.com
>>>t: +44(0) 1373 830888
>>>f: +44(0) 1373 830768
>>>
>>>-----Original Message-----
>>>From: Tom Miller [mailto:tom@xxxxxxxxxxxxxx]
>>>Sent: 04 September 2005 11:24
>>>To: support@xxxxxxxxxxxx; hylafax-users@xxxxxxxxxxx
>>>Subject: Incoming fax doesn't work
>>>
>>>
>>>I have the following systems:
>>>OS:  RedHat ES 3.0
>>>Hylafax:  4.2.1
>>>Modem:    8 Port MainPine
>>>
>>>
>>>I can send out fax but I can not receive any incoming fax.
>>>There are  not thing in the /var/spool/hylafax/recvq The
>>modem does not seem
>>>to pick up any incoming fax at all.
>>>
>>>
>>>What am I missing here?
>>>What do I need to verify?
>>>
>>>How can I temporary turn off the other 7 port
>>>(ttyS5,ttyS6,ttyS7,ttyS8,ttyS9,ttyS10,ttyS11)
>>>and just use the ttyS4 for testing/verfying incoming fax?
>>>
>>>In other world, can I force HylaFax to answer incoming only
>>on ttyS4?  if
>>>yes, How
>>>
>>>
>>>Thanks much.
>>>
>>>Tom
>>>
>>>
>>>
>>>____________________ HylaFAX(tm) Users Mailing List
>>_______________________
>>>  To subscribe/unsubscribe, click
>>http://lists.hylafax.org/cgi-bin/lsg2.cgi
>>> On UNIX: mail -s unsubscribe hylafax-users-
>>request@xxxxxxxxxxx < /dev/null
>>>  *To learn about commercial HylaFAX(tm) support, mail
>>sales@xxxxxxxxx*
>>>
>>
>>
>
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*